Load data for 6 x 52 R Bretschneider + .243 | 68gr | Barnes Match Burner BT

6 x 52 R Bretschneider cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:68 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:11.5

Load data in caliber 6 x 52 R Bretschneider with .243 | 68gr | Barnes Match Burner BT bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>94%42,206 psi88%2946 fps98.6%
Accurate 2495ᴾ<<locked>>100%39,421 psi82%2959 fps98.4%
Accurate LT-30<<locked>>86%43,134 psi90%2874 fps97.4%
ADI AR 2207<<locked>>84%42,322 psi88%2940 fps100%
ADI AR 2219<<locked>>86%40,596 psi85%2953 fps96.6%
Alliant AR-Comp<<locked>>96%41,582 psi87%3028 fps99.9%
Alliant Reloder-10x<<locked>>90%42,772 psi89%2982 fps99.4%
Alliant Reloder-7<<locked>>82%41,568 psi87%2894 fps99.4%
Baschieri & Pellagri 106<<locked>>86%41,524 psi87%2851 fps97.4%
Hodgdon H322<<locked>>90%41,974 psi88%2982 fps97%
Hodgdon H335<<locked>>90%43,047 psi90%2999 fps96.2%
Hodgdon H4198<<locked>>82%42,206 psi88%2874 fps96.6%
Hodgdon TrailBossᴾ<<locked>>100%31,981 psi67%1926 fps100%
IMR 3031<<locked>>98%41,945 psi88%3045 fps97.9%
IMR 4198<<locked>>88%42,380 psi89%2930 fps99.7%
Norma 200<<locked>>86%43,004 psi90%2966 fps99.7%
Norma 202<<locked>>98%42,815 psi89%2995 fps96.2%
ReloadSwiss RS 14ᴾ<<locked>>100%31,836 psi67%1969 fps100%
SNPE Vectan BA6 1/2<<locked>>82%42,772 psi89%2697 fps100%
SNPE Vectan SP 3<<locked>>88%40,973 psi86%2933 fps97.6%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%39,784 psi83%2844 fps96.4%
Somchem S335<<locked>>96%42,366 psi89%2913 fps97%
Vihtavuori N120<<locked>>84%42,467 psi89%2894 fps100%
Vihtavuori N130<<locked>>90%41,292 psi86%2884 fps99%
Vihtavuori N133<<locked>>96%43,149 psi90%2930 fps98.6%
Vihtavuori N135ᴾ<<locked>>100%40,654 psi85%2969 fps98.5%
Vihtavuori N140<<locked>>98%40,814 psi85%2923 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%30,835 psi64%2677 fps95.3%
Accurate 2495<<locked>>92%29,631 psi62%2723 fps95.4%
Accurate LT-30<<locked>>80%35,853 psi75%2713 fps95.4%
ADI AR 2207<<locked>>80%37,304 psi78%2838 fps100%
ADI AR 2219<<locked>>84%38,014 psi79%2890 fps95.8%
Alliant AR-Comp23.5 gr82%26,658 psi56%2628 fps96%
Alliant Reloder-10x<<locked>>80%31,198 psi65%2707 fps96.7%
Alliant Reloder-7<<locked>>80%38,885 psi81%2838 fps99.1%
Baschieri & Pellagri 106<<locked>>80%34,200 psi71%2687 fps95.2%
Hodgdon H32225.4 gr86%36,767 psi77%2861 fps95.4%
Hodgdon H335<<locked>>88%39,900 psi83%2933 fps95.3%
Hodgdon H4198<<locked>>80%39,523 psi83%2815 fps95.8%
Hodgdon TrailBoss<<locked>>80%23,511 psi49%1722 fps100%
IMR 303126.3 gr92%34,737 psi73%2871 fps95.6%
IMR 4198<<locked>>80%33,141 psi69%2717 fps98.1%
Norma 200<<locked>>80%35,679 psi75%2805 fps98.6%
Norma 202<<locked>>96%40,538 psi85%2949 fps95.6%
ReloadSwiss RS 14<<locked>>80%23,148 psi48%1759 fps100%
SNPE Vectan BA6 1/2<<locked>>80%40,480 psi85%2657 fps100%
SNPE Vectan SP 3<<locked>>82%34,185 psi71%2772 fps95.5%
SNPE Vectan Tubal 5000<<locked>>98%37,260 psi78%2789 fps95.6%
Somchem S335<<locked>>92%37,275 psi78%2802 fps95.5%
Vihtavuori N120<<locked>>80%37,478 psi78%2799 fps100%
Vihtavuori N130<<locked>>80%30,284 psi63%2621 fps96%
Vihtavuori N133<<locked>>86%31,734 psi66%2667 fps95.4%
Vihtavuori N135<<locked>>92%31,705 psi66%2756 fps95.8%
Vihtavuori N140<<locked>>96%38,290 psi80%2867 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6 x 52 R Bretschneider loaded with the .243 | 68gr | Barnes Match Burner BT. IMR 3031 delivers the highest muzzle velocity at 3,045 fps; across all powders the maximum-charge window runs from 1,926 fps to 3,045 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 68.0 gr projectile in 0.243" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Hodgdon H322 rank at the top here: for 6 x 52 R Bretschneider with the .243 | 68gr | Barnes Match Burner BT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data