Load data for 6 x 52 R Bretschneider + .243 | 66gr | SUS-TAC HPT

6 x 52 R Bretschneider cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:66 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:9.5

Load data in caliber 6 x 52 R Bretschneider with .243 | 66gr | SUS-TAC HPT bullet and 23 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Accurate 2015 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%42,453 psi89%2884 fps98.8%
Accurate 2015<<locked>>96%41,974 psi88%2959 fps98%
Accurate 2495ᴾ<<locked>>100%35,752 psi75%2900 fps96.9%
Accurate LT-30<<locked>>88%43,091 psi90%2887 fps96.7%
ADI AR 2207<<locked>>86%42,279 psi88%2963 fps100%
Alliant AR-Comp<<locked>>98%41,060 psi86%3035 fps99.7%
Alliant Reloder-10x<<locked>>92%42,438 psi89%2995 fps99%
Alliant Reloder-7<<locked>>84%41,684 psi87%2917 fps99.1%
Baschieri & Pellagri 106<<locked>>88%41,684 psi87%2871 fps96.8%
Hodgdon H322<<locked>>92%41,974 psi88%2995 fps96.2%
Hodgdon H4198<<locked>>84%42,511 psi89%2890 fps95.9%
Hodgdon TrailBossᴾ<<locked>>100%31,560 psi66%1926 fps100%
IMR 3031ᴾ<<locked>>100%41,466 psi87%3048 fps97%
IMR 4198<<locked>>90%42,076 psi88%2943 fps99.4%
Norma 200<<locked>>88%42,496 psi89%2979 fps99.4%
ReloadSwiss RS 14ᴾ<<locked>>100%30,937 psi65%1962 fps100%
SNPE Vectan BA6 1/2<<locked>>84%43,178 psi90%2730 fps100%
SNPE Vectan SP 3<<locked>>90%40,625 psi85%2943 fps96.9%
Somchem S335<<locked>>98%41,974 psi88%2917 fps96.1%
Vihtavuori N120<<locked>>86%42,380 psi89%2920 fps100%
Vihtavuori N130<<locked>>92%41,031 psi86%2897 fps98.5%
Vihtavuori N133<<locked>>98%42,743 psi89%2936 fps98%
Vihtavuori N135ᴾ<<locked>>100%37,275 psi78%2913 fps97.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,668 psi83%2828 fps98.3%
Accurate 201523.9 gr88%32,430 psi68%2740 fps95.2%
Accurate 2495<<locked>>96%30,748 psi64%2776 fps95.1%
Accurate LT-30<<locked>>84%38,537 psi81%2789 fps95.5%
ADI AR 2207<<locked>>80%34,911 psi73%2805 fps99.7%
Alliant AR-Comp23.6 gr86%28,123 psi59%2690 fps95.9%
Alliant Reloder-10x21.4 gr80%29,080 psi61%2667 fps95.1%
Alliant Reloder-7<<locked>>80%36,724 psi77%2805 fps98.1%
Baschieri & Pellagri 106<<locked>>84%36,332 psi76%2756 fps95.1%
Hodgdon H322<<locked>>90%39,175 psi82%2933 fps95.3%
Hodgdon H4198<<locked>>82%39,726 psi83%2831 fps95.1%
Hodgdon TrailBoss<<locked>>80%22,814 psi48%1716 fps100%
IMR 3031<<locked>>96%36,579 psi76%2933 fps95.4%
IMR 4198<<locked>>80%31,531 psi66%2690 fps97%
Norma 200<<locked>>80%33,011 psi69%2762 fps97.4%
ReloadSwiss RS 14<<locked>>80%22,829 psi48%1762 fps100%
SNPE Vectan BA6 1/2<<locked>>80%38,435 psi80%2644 fps100%
SNPE Vectan SP 3<<locked>>86%36,129 psi75%2838 fps95.4%
Somchem S335<<locked>>96%39,276 psi82%2861 fps95.3%
Vihtavuori N120<<locked>>80%35,114 psi73%2772 fps100%
Vihtavuori N130<<locked>>82%30,095 psi63%2635 fps95.2%
Vihtavuori N133<<locked>>90%33,228 psi69%2723 fps95.2%
Vihtavuori N135<<locked>>96%33,228 psi69%2812 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 23 powders for 6 x 52 R Bretschneider loaded with the .243 | 66gr | SUS-TAC HPT. IMR 3031 delivers the highest muzzle velocity at 3,048 fps; across all powders the maximum-charge window runs from 1,926 fps to 3,048 fps. Accurate 2495 gives the best case fill at 100 %, and 23 of the 23 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 66.0 gr projectile in 0.243" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Accurate 2015, Alliant Reloder-10x rank at the top here: for 6 x 52 R Bretschneider with the .243 | 66gr | SUS-TAC HPT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data