
Load Specifications
Load data in caliber 6 x 52 R Bretschneider with .243 | 62gr | Lehigh Defense Controlled Chaos bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Norma 200 and Alliant AR-Comp.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 41,568 psi | 87% | 2956 fps | 98.3% |
| Accurate 2015 | <<locked>> | 96% | 40,683 psi | 85% | 3022 fps | 97.3% |
| Accurate 2495ᴾ | <<locked>> | 100% | 34,185 psi | 71% | 2946 fps | 95.8% |
| Accurate LT-30 | <<locked>> | 88% | 42,279 psi | 88% | 2956 fps | 96% |
| ADI AR 2207 | <<locked>> | 86% | 41,394 psi | 86% | 3041 fps | 100% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 42,627 psi | 89% | 3156 fps | 99.6% |
| Alliant Reloder-10x | <<locked>> | 92% | 41,321 psi | 86% | 3064 fps | 98.4% |
| Alliant Reloder-7 | <<locked>> | 86% | 43,207 psi | 90% | 3038 fps | 99% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 40,538 psi | 85% | 2930 fps | 95.9% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,140 psi | 65% | 1991 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 40,625 psi | 85% | 3117 fps | 96.2% |
| IMR 4198 | <<locked>> | 90% | 41,365 psi | 86% | 3022 fps | 99% |
| Lovex S053 | <<locked>> | 82% | 43,250 psi | 90% | 2976 fps | 100% |
| Norma 200 | <<locked>> | 88% | 41,495 psi | 87% | 3051 fps | 99% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,922 psi | 65% | 2037 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 41,959 psi | 88% | 2802 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 42,453 psi | 89% | 3071 fps | 96.8% |
| Vihtavuori N120 | <<locked>> | 86% | 41,582 psi | 87% | 3002 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 42,351 psi | 88% | 3015 fps | 98.4% |
| Vihtavuori N133 | <<locked>> | 98% | 41,524 psi | 87% | 2999 fps | 97.3% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 36,535 psi | 76% | 2979 fps | 96.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 38,899 psi | 81% | 2897 fps | 97.7% |
| Accurate 2015 | <<locked>> | 90% | 33,475 psi | 70% | 2851 fps | 95% |
| Accurate 2495 | <<locked>> | 98% | 32,169 psi | 67% | 2894 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 86% | 40,045 psi | 84% | 2907 fps | 95.4% |
| ADI AR 2207 | <<locked>> | 80% | 33,968 psi | 71% | 2874 fps | 99.4% |
| Alliant AR-Comp | 24.8 gr | 88% | 29,370 psi | 61% | 2808 fps | 95.8% |
| Alliant Reloder-10x | 22.5 gr | 82% | 30,284 psi | 63% | 2785 fps | 95% |
| Alliant Reloder-7 | <<locked>> | 80% | 35,723 psi | 75% | 2871 fps | 97.5% |
| Baschieri & Pellagri 106 | <<locked>> | 86% | 38,101 psi | 80% | 2877 fps | 95.2% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,684 psi | 47% | 1781 fps | 100% |
| IMR 3031 | <<locked>> | 98% | 37,942 psi | 79% | 3051 fps | 95.3% |
| IMR 4198 | <<locked>> | 80% | 30,879 psi | 65% | 2753 fps | 96.1% |
| Lovex S053 | <<locked>> | 80% | 40,857 psi | 85% | 2933 fps | 100% |
| Norma 200 | 22.8 gr | 80% | 32,329 psi | 68% | 2831 fps | 96.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,640 psi | 47% | 1827 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 37,898 psi | 79% | 2730 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 88% | 37,478 psi | 78% | 2956 fps | 95.3% |
| Vihtavuori N120 | <<locked>> | 80% | 34,113 psi | 71% | 2841 fps | 99.9% |
| Vihtavuori N130 | <<locked>> | 84% | 31,285 psi | 65% | 2749 fps | 95.1% |
| Vihtavuori N133 | <<locked>> | 92% | 34,751 psi | 73% | 2844 fps | 95.2% |
| Vihtavuori N135 | <<locked>> | 98% | 34,084 psi | 71% | 2917 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for 6 x 52 R Bretschneider loaded with the .243 | 62gr | Lehigh Defense Controlled Chaos. Alliant AR-Comp delivers the highest muzzle velocity at 3,156 fps; across all powders the maximum-charge window runs from 1,991 fps to 3,156 fps. Accurate 2495 gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 62.0 gr projectile in 0.243" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Norma 200, Alliant AR-Comp rank at the top here: for 6 x 52 R Bretschneider with the .243 | 62gr | Lehigh Defense Controlled Chaos they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.