
Load Specifications
Load data in caliber 6 x 52 R Bretschneider with .243 | 62gr | Berger Euwin BR bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Accurate 2015 and SNPE Vectan SP 3.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 42,743 psi | 89% | 2992 fps | 98.7% |
| Accurate 2015 | <<locked>> | 96% | 41,916 psi | 88% | 3058 fps | 97.8% |
| Accurate 2495ᴾ | <<locked>> | 100% | 35,853 psi | 75% | 2995 fps | 96.6% |
| Accurate LT-30 | <<locked>> | 86% | 40,770 psi | 85% | 2936 fps | 95.8% |
| ADI AR 2207 | <<locked>> | 86% | 42,409 psi | 89% | 3071 fps | 100% |
| Alliant AR-Comp | <<locked>> | 98% | 41,278 psi | 86% | 3140 fps | 99.6% |
| Alliant Reloder-10x | <<locked>> | 92% | 42,670 psi | 89% | 3104 fps | 98.8% |
| Alliant Reloder-7 | <<locked>> | 84% | 41,727 psi | 87% | 3018 fps | 98.9% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 41,887 psi | 88% | 2972 fps | 96.6% |
| Hodgdon H322 | <<locked>> | 92% | 42,366 psi | 89% | 3104 fps | 96% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,488 psi | 66% | 2011 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 42,105 psi | 88% | 3163 fps | 96.9% |
| IMR 4198 | <<locked>> | 90% | 42,235 psi | 88% | 3051 fps | 99.3% |
| Norma 200 | <<locked>> | 88% | 42,815 psi | 89% | 3087 fps | 99.3% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,256 psi | 65% | 2057 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 43,105 psi | 90% | 2831 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 90% | 40,959 psi | 86% | 3051 fps | 96.7% |
| Somchem S335 | <<locked>> | 98% | 42,134 psi | 88% | 3018 fps | 95.9% |
| Vihtavuori N120 | <<locked>> | 86% | 42,598 psi | 89% | 3028 fps | 100% |
| Vihtavuori N130 | <<locked>> | 92% | 41,278 psi | 86% | 3005 fps | 98.3% |
| Vihtavuori N133 | <<locked>> | 98% | 43,062 psi | 90% | 3045 fps | 97.8% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 37,956 psi | 79% | 3025 fps | 97% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 39,639 psi | 83% | 2923 fps | 98.1% |
| Accurate 2015 | 25.7 gr | 90% | 34,664 psi | 72% | 2894 fps | 95.7% |
| Accurate 2495 | <<locked>> | 96% | 31,386 psi | 66% | 2884 fps | 95% |
| Accurate LT-30 | <<locked>> | 84% | 38,653 psi | 81% | 2890 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 34,998 psi | 73% | 2907 fps | 99.6% |
| Alliant AR-Comp | 24.9 gr | 86% | 28,442 psi | 59% | 2789 fps | 95.7% |
| Alliant Reloder-10x | <<locked>> | 82% | 31,183 psi | 65% | 2822 fps | 95.6% |
| Alliant Reloder-7 | <<locked>> | 80% | 36,637 psi | 77% | 2904 fps | 97.9% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 36,709 psi | 77% | 2854 fps | 95% |
| Hodgdon H322 | <<locked>> | 90% | 39,653 psi | 83% | 3045 fps | 95.2% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,163 psi | 48% | 1804 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 36,869 psi | 77% | 3035 fps | 95.2% |
| IMR 4198 | <<locked>> | 80% | 31,343 psi | 65% | 2779 fps | 96.6% |
| Norma 200 | <<locked>> | 80% | 33,257 psi | 69% | 2864 fps | 97.2% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,756 psi | 48% | 1841 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 38,595 psi | 81% | 2749 fps | 100% |
| SNPE Vectan SP 3 | 24.3 gr | 86% | 36,245 psi | 76% | 2936 fps | 95.1% |
| Somchem S335 | <<locked>> | 96% | 39,929 psi | 83% | 2972 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 35,128 psi | 73% | 2874 fps | 100% |
| Vihtavuori N130 | <<locked>> | 84% | 32,082 psi | 67% | 2782 fps | 95.7% |
| Vihtavuori N133 | <<locked>> | 92% | 35,781 psi | 75% | 2881 fps | 95.8% |
| Vihtavuori N135 | <<locked>> | 96% | 33,214 psi | 69% | 2904 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for 6 x 52 R Bretschneider loaded with the .243 | 62gr | Berger Euwin BR. IMR 3031 delivers the highest muzzle velocity at 3,163 fps; across all powders the maximum-charge window runs from 2,011 fps to 3,163 fps. Accurate 2495 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 62.0 gr projectile in 0.243" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Accurate 2015, SNPE Vectan SP 3 rank at the top here: for 6 x 52 R Bretschneider with the .243 | 62gr | Berger Euwin BR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.