Load data for 6 x 52 R BB2 + .243 | 62gr | Barnes Varmint Grenade FB

6 x 52 R BB2 cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:62 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:40 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:9.0

Load data in caliber 6 x 52 R BB2 with .243 | 62gr | Barnes Varmint Grenade FB bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Alliant AR-Comp and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>92%41,945 psi88%3107 fps98.5%
Accurate 2495ᴾ<<locked>>100%42,453 psi89%3182 fps98.9%
Accurate 4064ᴾ<<locked>>100%39,450 psi82%3130 fps95.9%
Accurate LT-30<<locked>>84%42,496 psi89%3035 fps97.3%
ADI AR 2207<<locked>>82%42,105 psi88%3110 fps100%
ADI AR 2219<<locked>>86%42,801 psi89%3173 fps97.2%
Alliant AR-Comp<<locked>>94%41,321 psi86%3196 fps99.9%
Alliant Reloder-10x<<locked>>88%42,699 psi89%3153 fps99.4%
Baschieri & Pellagri 106<<locked>>84%40,785 psi85%3002 fps97.3%
Hodgdon H322<<locked>>88%41,553 psi87%3146 fps96.9%
Hodgdon H335<<locked>>88%42,322 psi88%3153 fps96%
Hodgdon TrailBossᴾ<<locked>>100%32,155 psi67%2077 fps100%
IMR 3031<<locked>>96%41,930 psi88%3219 fps97.9%
IMR 4198<<locked>>86%41,481 psi87%3087 fps99.6%
Norma 200<<locked>>84%42,627 psi89%3130 fps99.7%
Norma 202<<locked>>96%43,047 psi90%3169 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%31,966 psi67%2123 fps100%
SNPE Vectan SP 3<<locked>>88%43,149 psi90%3153 fps98.1%
SNPE Vectan Tubal 3000<<locked>>94%43,279 psi90%3077 fps96.2%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%41,930 psi88%3058 fps97%
Somchem S335<<locked>>94%41,930 psi88%3068 fps96.9%
Vihtavuori N120<<locked>>82%42,235 psi88%3064 fps100%
Vihtavuori N130<<locked>>88%40,625 psi85%3041 fps98.9%
Vihtavuori N133<<locked>>94%42,627 psi89%3087 fps98.5%
Vihtavuori N135ᴾ<<locked>>100%43,308 psi90%3192 fps99%
Vihtavuori N140<<locked>>96%40,466 psi85%3081 fps96%
Vihtavuori N540<<locked>>98%42,105 psi88%3127 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>82%30,632 psi64%2828 fps95.1%
Accurate 2495<<locked>>90%29,849 psi62%2874 fps95.3%
Accurate 4064<<locked>>98%36,695 psi77%3064 fps95%
Accurate LT-30<<locked>>80%37,434 psi78%2920 fps95.9%
ADI AR 2207<<locked>>80%39,160 psi82%3048 fps100%
ADI AR 2219<<locked>>82%37,246 psi78%3041 fps95.6%
Alliant AR-Comp25.7 gr80%26,266 psi55%2766 fps95.6%
Alliant Reloder-10x<<locked>>80%33,112 psi69%2920 fps97.2%
Baschieri & Pellagri 106<<locked>>80%35,853 psi75%2887 fps95.8%
Hodgdon H32227.9 gr84%36,506 psi76%3022 fps95.3%
Hodgdon H335<<locked>>86%39,537 psi83%3087 fps95.2%
Hodgdon TrailBoss<<locked>>80%23,786 psi50%1867 fps100%
IMR 303128.9 gr90%34,635 psi72%3031 fps95.6%
IMR 4198<<locked>>80%34,606 psi72%2923 fps98.5%
Norma 200<<locked>>80%37,492 psi78%3015 fps99%
Norma 202<<locked>>94%40,176 psi84%3104 fps95.5%
ReloadSwiss RS 14<<locked>>80%23,395 psi49%1900 fps100%
SNPE Vectan SP 3<<locked>>80%33,373 psi70%2917 fps95.2%
SNPE Vectan Tubal 3000<<locked>>92%40,741 psi85%3022 fps95.4%
SNPE Vectan Tubal 5000<<locked>>96%37,231 psi78%2953 fps95.6%
Somchem S335<<locked>>90%37,014 psi77%2956 fps95.4%
Vihtavuori N120<<locked>>80%39,305 psi82%3005 fps100%
Vihtavuori N130<<locked>>80%31,676 psi66%2818 fps96.5%
Vihtavuori N133<<locked>>84%31,328 psi65%2812 fps95.2%
Vihtavuori N135<<locked>>90%31,517 psi66%2907 fps95.7%
Vihtavuori N140<<locked>>94%38,174 psi80%3028 fps95.2%
Vihtavuori N540<<locked>>96%39,392 psi82%3064 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6 x 52 R BB2 loaded with the .243 | 62gr | Barnes Varmint Grenade FB. IMR 3031 delivers the highest muzzle velocity at 3,219 fps; across all powders the maximum-charge window runs from 2,077 fps to 3,219 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 62.0 gr projectile in 0.243" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Alliant AR-Comp, Hodgdon H322 rank at the top here: for 6 x 52 R BB2 with the .243 | 62gr | Barnes Varmint Grenade FB they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data