Load data for 6 mm PPC + .243 | 60gr | Reichenberg Spezial Jagd

6 mm PPC cartridge drawing
Reichenberg logo

Load Specifications

Bullet Manufacturer:Reichenberg
Bullet Weight:60 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):1.505"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:33 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:12.5

Load data in caliber 6 mm PPC with .243 | 60gr | Reichenberg Spezial Jagd bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2207 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%51,329 psi87%3196 fps98.9%
Accurate LT-30<<locked>>98%51,692 psi88%3186 fps96.8%
Accurate No. 11 FS<<locked>>82%53,156 psi90%3212 fps100%
ADI AR 2205<<locked>>84%50,647 psi86%3084 fps100%
ADI AR 2207<<locked>>98%52,286 psi89%3314 fps100%
ADI AR 2219ᴾ<<locked>>100%51,909 psi88%3333 fps96.6%
Alliant AR-Compᴾ<<locked>>100%36,970 psi63%3081 fps97.4%
Alliant Reloder-10xᴾ<<locked>>100%46,325 psi79%3235 fps98.4%
Alliant Reloder-7<<locked>>96%52,112 psi89%3268 fps99.4%
Baschieri & Pellagri 106ᴾ<<locked>>100%52,649 psi90%3212 fps97.4%
Hodgdon H4198<<locked>>94%50,270 psi86%3182 fps95.9%
Hodgdon TrailBossᴾ<<locked>>100%30,037 psi51%1995 fps100%
IMR 4198ᴾ<<locked>>100%48,863 psi83%3228 fps99.3%
IMR 4227<<locked>>90%50,488 psi86%3192 fps99.9%
Lovex D060<<locked>>84%51,155 psi87%3241 fps99.4%
Lovex S053<<locked>>92%51,285 psi87%3186 fps100%
Norma 200ᴾ<<locked>>100%52,663 psi90%3330 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%29,762 psi51%2041 fps100%
ReloadSwiss RS 36<<locked>>92%52,678 psi90%3271 fps100%
Shooters World Buffalo Rifle<<locked>>84%51,155 psi87%3241 fps99.4%
Shooters World SOCOM<<locked>>84%51,750 psi88%3199 fps99.8%
SNPE Vectan BA6 1/2<<locked>>96%52,127 psi89%3031 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%47,442 psi81%3228 fps96.7%
Vihtavuori N110<<locked>>86%51,314 psi87%3107 fps100%
Vihtavuori N120<<locked>>98%52,402 psi89%3261 fps100%
Vihtavuori N130ᴾ<<locked>>100%44,628 psi76%3120 fps97.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%34,432 psi59%2841 fps95.1%
Accurate LT-30<<locked>>94%45,440 psi77%3071 fps95.4%
Accurate No. 11 FS<<locked>>80%50,125 psi85%3163 fps100%
ADI AR 2205<<locked>>80%45,049 psi77%2989 fps100%
ADI AR 220720.3 gr80%29,921 psi51%2831 fps97.7%
ADI AR 2219<<locked>>98%48,254 psi82%3268 fps95.8%
Alliant AR-Comp<<locked>>96%32,822 psi56%2963 fps95.9%
Alliant Reloder-10x<<locked>>90%33,707 psi57%2946 fps95.1%
Alliant Reloder-721.5 gr82%33,649 psi57%2874 fps95.6%
Baschieri & Pellagri 106<<locked>>94%43,555 psi74%3048 fps95.4%
Hodgdon H4198<<locked>>92%47,456 psi81%3130 fps95.2%
Hodgdon TrailBoss<<locked>>80%22,075 psi38%1788 fps100%
IMR 4198<<locked>>86%32,735 psi56%2858 fps95.6%
IMR 4227<<locked>>80%37,115 psi63%2920 fps98.4%
Lovex D060<<locked>>80%45,513 psi77%3130 fps98.7%
Lovex S053<<locked>>80%36,245 psi62%2897 fps99.9%
Norma 200<<locked>>84%31,792 psi54%2881 fps95.3%
ReloadSwiss RS 14<<locked>>80%21,582 psi37%1824 fps100%
ReloadSwiss RS 3621.1 gr80%36,463 psi62%2946 fps98.2%
Shooters World Buffalo Rifle<<locked>>80%45,513 psi77%3130 fps98.7%
Shooters World SOCOM<<locked>>80%45,426 psi77%3084 fps99.2%
SNPE Vectan BA6 1/2<<locked>>80%34,214 psi58%2720 fps100%
SNPE Vectan SP 3<<locked>>96%42,076 psi72%3117 fps95.3%
Vihtavuori N110<<locked>>80%42,975 psi73%2969 fps100%
Vihtavuori N120<<locked>>80%30,182 psi51%2805 fps98.8%
Vihtavuori N130<<locked>>92%35,143 psi60%2910 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 6 mm PPC loaded with the .243 | 60gr | Reichenberg Spezial Jagd. ADI AR 2219 delivers the highest muzzle velocity at 3,333 fps; across all powders the maximum-charge window runs from 1,995 fps to 3,333 fps. ADI AR 2219 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 51–90 %, leaving at least 10 % headroom. The 60.0 gr projectile in 0.243" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. ADI AR 2219, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2207, ReloadSwiss RS 36 rank at the top here: for 6 mm PPC with the .243 | 60gr | Reichenberg Spezial Jagd they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data