Load data for 6 mm ARC + .243 | 65gr | Impala LWHV LS

6 mm ARC cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:65 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):1.5"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:52,000 psi
Recommended Twist Rate:1:8.5

Load data in caliber 6 mm ARC with .243 | 65gr | Impala LWHV LS bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, SNPE Vectan SP 3 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%46,847 psi90%3022 fps99.2%
Accurate 2015<<locked>>98%46,470 psi89%3100 fps98.5%
Accurate 2495ᴾ<<locked>>100%38,595 psi74%3015 fps97.3%
Accurate LT-30<<locked>>88%44,889 psi86%2972 fps96.8%
ADI AR 2207<<locked>>88%45,992 psi88%3097 fps100%
ADI AR 2219<<locked>>92%46,775 psi90%3159 fps97.1%
Alliant AR-Compᴾ<<locked>>100%44,367 psi85%3169 fps99.8%
Alliant Reloder-10x<<locked>>94%46,151 psi89%3133 fps99.3%
Alliant Reloder-7<<locked>>86%44,918 psi86%3038 fps99.4%
Baschieri & Pellagri 106<<locked>>90%44,686 psi86%2992 fps97.2%
Hodgdon H322<<locked>>98%46,775 psi90%3159 fps97.1%
Hodgdon H4198<<locked>>88%45,455 psi87%3012 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%31,836 psi61%1962 fps100%
IMR 4198<<locked>>92%44,947 psi86%3064 fps99.6%
IMR 4227<<locked>>82%45,643 psi88%3009 fps100%
Lovex S053<<locked>>82%45,049 psi87%2972 fps100%
Norma 200<<locked>>90%46,702 psi90%3120 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%31,807 psi61%2008 fps100%
ReloadSwiss RS 36<<locked>>82%45,614 psi88%3045 fps100%
SNPE Vectan BA6 1/2<<locked>>86%45,948 psi88%2828 fps100%
SNPE Vectan SP 10<<locked>>92%47,065 psi90%3156 fps96%
SNPE Vectan SP 3<<locked>>92%44,962 psi86%3087 fps97.6%
Somchem S335ᴾ<<locked>>100%45,498 psi87%3048 fps96.6%
Vihtavuori N120<<locked>>90%45,107 psi87%3028 fps100%
Vihtavuori N130<<locked>>96%45,963 psi88%3058 fps99.1%
Vihtavuori N133ᴾ<<locked>>100%42,322 psi81%2995 fps97.6%
Vihtavuori N135ᴾ<<locked>>100%39,508 psi76%3015 fps97.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%41,321 psi79%2910 fps98.4%
Accurate 2015<<locked>>86%32,996 psi63%2795 fps95%
Accurate 2495<<locked>>94%32,068 psi62%2851 fps95.2%
Accurate LT-30<<locked>>84%40,030 psi77%2871 fps95.5%
ADI AR 220721.3 gr80%35,926 psi69%2887 fps99.7%
ADI AR 2219<<locked>>88%41,104 psi79%3035 fps95.6%
Alliant AR-Comp<<locked>>84%27,659 psi53%2717 fps95.1%
Alliant Reloder-10x21.5 gr80%30,298 psi58%2749 fps95.3%
Alliant Reloder-7<<locked>>80%37,797 psi73%2884 fps98.2%
Baschieri & Pellagri 106<<locked>>84%37,246 psi72%2831 fps95.1%
Hodgdon H322<<locked>>92%39,305 psi75%2992 fps95%
Hodgdon H4198<<locked>>86%42,598 psi82%2949 fps95.6%
Hodgdon TrailBoss<<locked>>80%23,670 psi45%1759 fps100%
IMR 4198<<locked>>80%32,387 psi62%2762 fps97%
IMR 4227<<locked>>80%43,134 psi83%2956 fps99.9%
Lovex S053<<locked>>80%42,569 psi82%2927 fps100%
Norma 200<<locked>>80%34,548 psi66%2851 fps97.6%
ReloadSwiss RS 14<<locked>>80%23,380 psi45%1795 fps100%
ReloadSwiss RS 36<<locked>>80%42,699 psi82%2989 fps99.8%
SNPE Vectan BA6 1/2<<locked>>80%39,349 psi76%2713 fps100%
SNPE Vectan SP 10<<locked>>90%44,150 psi85%3097 fps95.2%
SNPE Vectan SP 323.2 gr86%37,869 psi73%2927 fps95.6%
Somchem S335<<locked>>96%40,509 psi78%2946 fps95.3%
Vihtavuori N120<<locked>>80%33,750 psi65%2792 fps99.9%
Vihtavuori N130<<locked>>82%30,777 psi59%2703 fps95.1%
Vihtavuori N133<<locked>>92%33,794 psi65%2792 fps95%
Vihtavuori N135<<locked>>94%33,315 psi64%2858 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6 mm ARC loaded with the .243 | 65gr | Impala LWHV LS. Alliant AR-Comp delivers the highest muzzle velocity at 3,169 fps; across all powders the maximum-charge window runs from 1,962 fps to 3,169 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (359 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. The 65.0 gr projectile in 0.243" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, SNPE Vectan SP 3, ADI AR 2207 rank at the top here: for 6 mm ARC with the .243 | 65gr | Impala LWHV LS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data