top of page

Load data for 5.6 x 70 R + .224 | 90gr | Hornady A-MAX

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

5.6 x 70 R + .224 | 90gr | Hornady A-MAX

Load Specifications

Bullet:
.224 | 90gr | Hornady A-MAX
Manufacturer SKU:
2286
Bullet Weight:
90gr | 5.8g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
1.233" | 31.3mm
Caliber:
5.6 x 70 R
Case Length (l3):
2.760" | 70.1mm
Cartridge Length (C.O.L.):
3.374" | 85.7mm
Seated Depth:
0.619" | 15.7mm
Shank Seated Depth:
0.439" | 11.2mm
Case Capacity:
39.0 Grains of Water | 2.53 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
37710 psi | 2600 bar
LID:
LID_B2533_C921

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber 5.6 x 70 R with .224 | 90gr | Hornady A-MAX bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 3100]*
<<locked>>
95%
33678
89%
**88
92%
Accurate 4350
<<locked>>
85%
33286
88%
**05
95%
Alliant Reloder-16
<<locked>>
85%
33620
89%
**11
95%
Alliant Reloder-23
<<locked>>
95%
32982
87%
**25
96%
[Alliant Reloder-26]*
<<locked>>
93%
33750
90%
**84
93%
Hodgdon Hybrid 100V
<<locked>>
87%
32837
87%
**69
96%
IMR 4831
<<locked>>
90%
33504
89%
**92
95%
[Lovex S070]*
<<locked>>
83%
33446
89%
**36
91%
Norma URP
<<locked>>
85%
33721
89%
**05
95%
ReloadSwiss RS 14
<<locked>>
95%
33736
89%
**70
100%
[ReloadSwiss RS 62]*
<<locked>>
86%
33605
89%
**28
94%
[ReloadSwiss RS 70]*
<<locked>>
85%
32895
87%
**98
92%
Somchem S365
<<locked>>
88%
33315
88%
**38
98%
Vihtavuori N150
<<locked>>
83%
33417
89%
**33
98%
Vihtavuori N555
<<locked>>
93%
32938
87%
**44
95%
Winchester 6.5 StaBALL
<<locked>>
84%
33852
90%
**52
97%
Winchester StaBALL HD
<<locked>>
97%
30676
81%
**25
96%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 3100]*
<<locked>>
91%
29283
78%
**83
90%
[Accurate 4350]*
<<locked>>
81%
28848
77%
**90
92%
[Alliant Reloder-16]*
<<locked>>
81%
29428
78%
**97
92%
[Alliant Reloder-23]*
<<locked>>
85%
24250
64%
**62
90%
[Alliant Reloder-26]*
<<locked>>
89%
28732
76%
**43
90%
[Hodgdon Hybrid 100V]*
<<locked>>
81%
26905
71%
**08
93%
[IMR 4831]*
<<locked>>
81%
25701
68%
**85
90%
[Lovex S070]*
<<locked>>
81%
31328
83%
**83
90%
[Norma URP]*
<<locked>>
81%
29472
78%
**00
92%
ReloadSwiss RS 14
<<locked>>
92%
32372
86%
**47
100%
[ReloadSwiss RS 62]*
<<locked>>
81%
28616
76%
**93
91%
[ReloadSwiss RS 70]*
<<locked>>
82%
30023
80%
**16
90%
Somchem S365
<<locked>>
81%
26455
70%
**47
95%
Vihtavuori N150
<<locked>>
81%
31328
83%
**83
97%
[Vihtavuori N555]*
<<locked>>
84%
24526
65%
**98
90%
Winchester 6.5 StaBALL
<<locked>>
81%
30908
82%
**83
96%
[Winchester StaBALL HD]*
<<locked>>
91%
25498
68%
**47
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page