Load Specifications
Load data in caliber 5.6 x 70 R with .224 | 55gr | Barnes TTSX BT bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2495 | <<locked>> | 86% | 33,170 psi | 88% | 2923 fps | 98.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,924 psi | 87% | 2113 fps | 100% |
| IMR 3031 | <<locked>> | 82% | 32,329 psi | 86% | 2943 fps | 96.6% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 33,257 psi | 88% | 2169 fps | 100% |
| SNPE Vectan Tubal 5000 | <<locked>> | 86% | 32,358 psi | 86% | 2812 fps | 95.9% |
| Vihtavuori N135 | <<locked>> | 86% | 34,011 psi | 90% | 2940 fps | 98.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2495 | <<locked>> | 80% | 26,556 psi | 70% | 2726 fps | 95.4% |
| Hodgdon TrailBoss | 9 gr | 80% | 24,323 psi | 65% | 1903 fps | 100% |
| IMR 3031 | <<locked>> | 80% | 30,327 psi | 80% | 2884 fps | 95.7% |
| ReloadSwiss RS 14 | 9.2 gr | 80% | 24,395 psi | 65% | 1949 fps | 100% |
| SNPE Vectan Tubal 5000 | <<locked>> | 84% | 30,356 psi | 81% | 2756 fps | 95% |
| Vihtavuori N135 | <<locked>> | 80% | 27,601 psi | 73% | 2759 fps | 95.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 6 powders for 5.6 x 70 R loaded with the .224 | 55gr | Barnes TTSX BT. IMR 3031 delivers the highest muzzle velocity at 2,943 fps; across all powders the maximum-charge window runs from 2,113 fps to 2,943 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (260 MPa), the top charges use 86–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 5.6 x 70 R with the .224 | 55gr | Barnes TTSX BT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.