top of page

Load data for 5.6 x 70 R + .224 | 50gr | Winchester Pointed Soft Point

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

5.6 x 70 R + .224 | 50gr | Winchester Pointed Soft Point

Load Specifications

Bullet:
.224 | 50gr | Winchester Pointed Soft Point
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
1.000" | 25.4mm
Caliber:
5.6 x 70 R
Case Length (l3):
2.760" | 70.1mm
Cartridge Length (C.O.L.):
3.374" | 85.7mm
Seated Depth:
0.386" | 9.8mm
Shank Seated Depth:
0.386" | 9.8mm
Case Capacity:
39.0 Grains of Water | 2.53 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
37710 psi | 2600 bar
LID:
LID_B6596_C921

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 28 loads in caliber 5.6 x 70 R with .224 | 50gr | Winchester Pointed Soft Point bullet and 14 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2495
<<locked>>
85%
33156
88%
**54
97%
[Accurate 2520]*
<<locked>>
84%
33460
89%
**28
93%
[Accurate 4064]*
<<locked>>
91%
33939
90%
**48
94%
Hodgdon TrailBoss
<<locked>>
95%
30487
81%
**42
100%
IMR 3031
<<locked>>
88%
33852
90%
**87
96%
[Lovex D073.6]*
<<locked>>
85%
33460
89%
**28
93%
[Norma 202]*
<<locked>>
84%
32938
87%
**89
93%
ReloadSwiss RS 14
<<locked>>
94%
30284
80%
**85
100%
SNPE Vectan Tubal 5000
<<locked>>
89%
33794
90%
**40
95%
[Shooters World Match Rifle]*
<<locked>>
85%
33460
89%
**28
93%
Vihtavuori N133
<<locked>>
84%
33025
88%
**43
96%
Vihtavuori N135
<<locked>>
93%
33779
90%
**31
96%
[Vihtavuori N140]*
<<locked>>
86%
33069
88%
**69
94%
[Vihtavuori N540]*
<<locked>>
87%
33692
89%
**05
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2495
<<locked>>
81%
28892
77%
**30
95%
[Accurate 2520]*
<<locked>>
81%
30211
80%
**30
91%
[Accurate 4064]*
<<locked>>
84%
26905
71%
**31
90%
Hodgdon TrailBoss
<<locked>>
81%
24410
65%
**82
100%
[IMR 3031]*
<<locked>>
81%
26948
71%
**58
92%
[Lovex D073.6]*
<<locked>>
82%
29312
78%
**00
90%
[Norma 202]*
<<locked>>
81%
29907
79%
**97
92%
ReloadSwiss RS 14
<<locked>>
80%
24308
64%
**28
100%
[SNPE Vectan Tubal 5000]*
<<locked>>
81%
26237
70%
**13
91%
[Shooters World Match Rifle]*
<<locked>>
82%
29312
78%
**00
90%
Vihtavuori N133
<<locked>>
81%
30052
80%
**51
95%
[Vihtavuori N135]*
<<locked>>
82%
23482
62%
**90
90%
[Vihtavuori N140]*
<<locked>>
81%
28224
75%
**15
91%
[Vihtavuori N540]*
<<locked>>
82%
28718
76%
**48
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page