Load data for 5.6 x 70 R + .224 | 50gr | Nosler Ballistic Tip Lead Free

5.6 x 70 R cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):2.76"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:8.5

Load data in caliber 5.6 x 70 R with .224 | 50gr | Nosler Ballistic Tip Lead Free bullet and 7 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Accurate 2495, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>82%34,026 psi90%3005 fps97.1%
Accurate 2495<<locked>>88%32,416 psi86%3009 fps97%
Alliant AR-Comp<<locked>>84%33,794 psi90%3091 fps99.3%
Hodgdon TrailBossᴾ<<locked>>100%32,445 psi86%2201 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%32,271 psi86%2247 fps100%
Vihtavuori N133<<locked>>82%32,532 psi86%2933 fps96.4%
Vihtavuori N135<<locked>>88%33,431 psi89%3038 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%31,937 psi85%2946 fps96.3%
Accurate 249527.4 gr84%28,007 psi74%2877 fps95%
Alliant AR-Comp<<locked>>80%29,356 psi78%2959 fps98%
Hodgdon TrailBoss9 gr80%23,917 psi63%1982 fps100%
ReloadSwiss RS 149.2 gr80%23,902 psi63%2031 fps100%
Vihtavuori N133<<locked>>80%30,530 psi81%2874 fps95.6%
Vihtavuori N135<<locked>>84%29,356 psi78%2917 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 7 powders for 5.6 x 70 R loaded with the .224 | 50gr | Nosler Ballistic Tip Lead Free. Alliant AR-Comp delivers the highest muzzle velocity at 3,091 fps; across all powders the maximum-charge window runs from 2,201 fps to 3,091 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 7 of the 7 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 86–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Accurate 2495, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 5.6 x 70 R with the .224 | 50gr | Nosler Ballistic Tip Lead Free they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data