top of page

Load data for 5.6 x 70 R + .224 | 46gr | RWS VMS

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

5.6 x 70 R + .224 | 46gr | RWS VMS

Load Specifications

Bullet:
.224 | 46gr | RWS VMS
Manufacturer SKU:
2145847
Bullet Weight:
46gr | 3.0g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.570" | 14.5mm
Caliber:
5.6 x 70 R
Case Length (l3):
2.760" | 70.1mm
Cartridge Length (C.O.L.):
3.208" | 81.5mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
39.0 Grains of Water | 2.53 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
37710 psi | 2600 bar
LID:
LID_B5356_C921

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber 5.6 x 70 R with .224 | 46gr | RWS VMS bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2495
<<locked>>
84%
33185
88%
**59
96%
[Accurate 4064]*
<<locked>>
89%
33460
89%
**50
94%
Hodgdon TrailBoss
<<locked>>
95%
30487
81%
**60
100%
IMR 3031
<<locked>>
87%
33083
88%
**76
95%
[Lovex D073.6]*
<<locked>>
85%
33852
90%
**43
92%
[Norma 202]*
<<locked>>
84%
33794
90%
**23
93%
ReloadSwiss RS 14
<<locked>>
97%
31502
84%
**33
100%
[SNPE Vectan Tubal 5000]*
<<locked>>
88%
33098
88%
**31
94%
[Shooters World Match Rifle]*
<<locked>>
85%
33852
90%
**43
92%
Vihtavuori N133
<<locked>>
84%
33228
88%
**58
96%
Vihtavuori N135
<<locked>>
93%
33852
90%
**30
96%
[Vihtavuori N140]*
<<locked>>
85%
33156
88%
**87
94%
[Vihtavuori N540]*
<<locked>>
85%
33069
88%
**97
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2495
<<locked>>
81%
30168
80%
**68
95%
[Accurate 4064]*
<<locked>>
84%
27804
74%
**69
91%
Hodgdon TrailBoss
<<locked>>
82%
24831
66%
**06
100%
[IMR 3031]*
<<locked>>
81%
27586
73%
**79
92%
[Lovex D073.6]*
<<locked>>
82%
29950
79%
**22
90%
[Norma 202]*
<<locked>>
81%
30748
82%
**28
92%
ReloadSwiss RS 14
<<locked>>
81%
24685
65%
**49
100%
[SNPE Vectan Tubal 5000]*
<<locked>>
81%
26716
71%
**25
91%
[Shooters World Match Rifle]*
<<locked>>
82%
29950
79%
**22
90%
Vihtavuori N133
<<locked>>
81%
30371
81%
**72
95%
[Vihtavuori N135]*
<<locked>>
82%
24091
64%
**02
90%
[Vihtavuori N140]*
<<locked>>
81%
28485
76%
**33
91%
[Vihtavuori N540]*
<<locked>>
81%
28587
76%
**53
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page