top of page

Load data for 5.6 x 70 R + .224 | 43gr | Speer TNT Green

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

5.6 x 70 R + .224 | 43gr | Speer TNT Green

Load Specifications

Bullet:
.224 | 43gr | Speer TNT Green
Manufacturer SKU:
1022
Bullet Weight:
43gr | 2.8g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.576" | 14.6mm
Caliber:
5.6 x 70 R
Case Length (l3):
2.760" | 70.1mm
Cartridge Length (C.O.L.):
3.214" | 81.6mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
39.0 Grains of Water | 2.53 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
37710 psi | 2600 bar
LID:
LID_B6052_C921

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber 5.6 x 70 R with .224 | 43gr | Speer TNT Green bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2495
<<locked>>
86%
33185
88%
**38
96%
[Accurate 4064]*
<<locked>>
91%
33547
89%
**15
93%
Alliant AR-Comp
<<locked>>
84%
33083
88%
**45
98%
Hodgdon TrailBoss
<<locked>>
95%
30153
80%
**26
100%
IMR 3031
<<locked>>
89%
33692
89%
**68
95%
[Norma 202]*
<<locked>>
85%
33025
88%
**76
92%
ReloadSwiss RS 14
<<locked>>
97%
31024
82%
**98
100%
[SNPE Vectan Tubal 5000]*
<<locked>>
89%
33504
89%
**10
94%
[Somchem S335]*
<<locked>>
84%
33852
90%
**23
94%
Vihtavuori N133
<<locked>>
86%
33620
89%
**43
96%
Vihtavuori N135
<<locked>>
94%
33141
88%
**89
95%
[Vihtavuori N140]*
<<locked>>
87%
33576
89%
**66
93%
[Vihtavuori N540]*
<<locked>>
87%
33605
89%
**82
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 2495]*
<<locked>>
81%
28326
75%
**74
93%
[Accurate 4064]*
<<locked>>
87%
29530
78%
**87
91%
Alliant AR-Comp
<<locked>>
81%
29950
79%
**43
97%
Hodgdon TrailBoss
<<locked>>
82%
24511
65%
**65
100%
[IMR 3031]*
<<locked>>
82%
27064
72%
**35
90%
[Norma 202]*
<<locked>>
82%
30211
80%
**91
90%
ReloadSwiss RS 14
<<locked>>
81%
24337
65%
**11
100%
[SNPE Vectan Tubal 5000]*
<<locked>>
84%
27876
74%
**33
90%
[Somchem S335]*
<<locked>>
81%
30995
82%
**38
92%
[Vihtavuori N133]*
<<locked>>
81%
28993
77%
**02
93%
[Vihtavuori N135]*
<<locked>>
86%
25976
69%
**46
91%
[Vihtavuori N140]*
<<locked>>
83%
28863
77%
**18
90%
[Vihtavuori N540]*
<<locked>>
85%
30676
81%
**84
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page