
Load Specifications
Load data in caliber 5.6 x 52 R with .227 | 50gr | Impala RNFP KO bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Accurate 2495.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 90% | 42,163 psi | 88% | 3150 fps | 98.1% |
| Accurate 2495 | <<locked>> | 96% | 40,828 psi | 85% | 3182 fps | 98.3% |
| Accurate 4064ᴾ | <<locked>> | 100% | 42,815 psi | 89% | 3238 fps | 96.3% |
| Accurate LT-30 | <<locked>> | 82% | 41,437 psi | 87% | 3058 fps | 96.5% |
| ADI AR 2219 | <<locked>> | 84% | 42,061 psi | 88% | 3199 fps | 96.5% |
| Alliant AR-Comp | <<locked>> | 92% | 41,234 psi | 86% | 3235 fps | 99.7% |
| Alliant Reloder-10x | <<locked>> | 86% | 42,670 psi | 89% | 3196 fps | 99% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 42,931 psi | 90% | 3087 fps | 97.4% |
| Hodgdon H322 | <<locked>> | 90% | 42,975 psi | 90% | 3219 fps | 96.7% |
| Hodgdon H4198 | <<locked>> | 82% | 42,670 psi | 89% | 3104 fps | 96.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,982 psi | 69% | 2152 fps | 100% |
| IMR 3031 | <<locked>> | 98% | 42,641 psi | 89% | 3274 fps | 97.6% |
| IMR 4198 | <<locked>> | 84% | 41,002 psi | 86% | 3127 fps | 99.3% |
| Norma 200 | <<locked>> | 82% | 43,149 psi | 90% | 3179 fps | 99.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 33,069 psi | 69% | 2201 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 42,525 psi | 89% | 3186 fps | 97.5% |
| SNPE Vectan Tubal 5000 | <<locked>> | 98% | 41,481 psi | 87% | 3084 fps | 96.4% |
| Somchem S335 | <<locked>> | 92% | 41,930 psi | 88% | 3104 fps | 96.3% |
| Vihtavuori N130 | <<locked>> | 88% | 43,207 psi | 90% | 3136 fps | 99% |
| Vihtavuori N133 | <<locked>> | 92% | 42,308 psi | 88% | 3123 fps | 98.1% |
| Vihtavuori N135 | <<locked>> | 98% | 42,975 psi | 90% | 3225 fps | 98.6% |
| Vihtavuori N140 | <<locked>> | 96% | 42,873 psi | 90% | 3169 fps | 96.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 82% | 33,359 psi | 70% | 2933 fps | 95.5% |
| Accurate 2495 | 25.2 gr | 88% | 31,705 psi | 66% | 2953 fps | 95.4% |
| Accurate 4064 | <<locked>> | 98% | 40,611 psi | 85% | 3186 fps | 95.6% |
| Accurate LT-30 | <<locked>> | 80% | 39,363 psi | 82% | 3009 fps | 95.9% |
| ADI AR 2219 | <<locked>> | 82% | 39,436 psi | 82% | 3136 fps | 95.7% |
| Alliant AR-Comp | 22.7 gr | 80% | 28,674 psi | 60% | 2881 fps | 96.3% |
| Alliant Reloder-10x | <<locked>> | 80% | 35,534 psi | 74% | 3025 fps | 97.5% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 37,739 psi | 79% | 2972 fps | 95.9% |
| Hodgdon H322 | <<locked>> | 86% | 37,782 psi | 79% | 3094 fps | 95.1% |
| Hodgdon H4198 | <<locked>> | 80% | 40,422 psi | 84% | 3054 fps | 95.5% |
| Hodgdon TrailBoss | <<locked>> | 80% | 24,453 psi | 51% | 1932 fps | 100% |
| IMR 3031 | 25.2 gr | 92% | 35,897 psi | 75% | 3104 fps | 95.4% |
| IMR 4198 | <<locked>> | 80% | 36,405 psi | 76% | 3015 fps | 98.5% |
| Norma 200 | <<locked>> | 80% | 40,538 psi | 85% | 3123 fps | 99.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 24,221 psi | 51% | 1969 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 35,288 psi | 74% | 3005 fps | 95.2% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 39,233 psi | 82% | 3035 fps | 95.7% |
| Somchem S335 | <<locked>> | 90% | 39,813 psi | 83% | 3058 fps | 95.7% |
| Vihtavuori N130 | <<locked>> | 80% | 33,852 psi | 71% | 2913 fps | 96.7% |
| Vihtavuori N133 | <<locked>> | 84% | 33,504 psi | 70% | 2910 fps | 95.4% |
| Vihtavuori N135 | <<locked>> | 88% | 32,039 psi | 67% | 2953 fps | 95.2% |
| Vihtavuori N140 | <<locked>> | 94% | 40,248 psi | 84% | 3114 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for 5.6 x 52 R loaded with the .227 | 50gr | Impala RNFP KO. IMR 3031 delivers the highest muzzle velocity at 3,274 fps; across all powders the maximum-charge window runs from 2,152 fps to 3,274 fps. Accurate 4064 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 69–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.227" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Accurate 4064, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Accurate 2495 rank at the top here: for 5.6 x 52 R with the .227 | 50gr | Impala RNFP KO they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.