Load data for 5.6 x 50 R Mag. + .227 | 50gr | Impala RNFP KO

5.6 x 50 R Mag. cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:50 gr
Bullet Diameter:0.227"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:11.0

Load data in caliber 5.6 x 50 R Mag. with .227 | 50gr | Impala RNFP KO bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Accurate 2015 and Accurate 2495.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>92%43,671 psi89%3156 fps98.4%
Accurate 2495<<locked>>98%42,598 psi86%3196 fps98.6%
Accurate 4064ᴾ<<locked>>100%41,872 psi85%3192 fps95.9%
Accurate LT-30<<locked>>84%43,178 psi88%3068 fps96.9%
ADI AR 2207<<locked>>82%43,627 psi88%3166 fps100%
ADI AR 2219<<locked>>86%44,106 psi89%3215 fps96.9%
Alliant AR-Comp<<locked>>94%42,844 psi87%3245 fps99.9%
Alliant Reloder-10x<<locked>>88%43,990 psi89%3199 fps99.2%
Baschieri & Pellagri 106<<locked>>86%44,585 psi90%3097 fps97.6%
Hodgdon H322<<locked>>90%42,221 psi86%3176 fps96.4%
Hodgdon H4198<<locked>>82%42,395 psi86%3071 fps96%
Hodgdon TrailBossᴾ<<locked>>100%32,866 psi67%2123 fps100%
IMR 3031ᴾ<<locked>>100%44,396 psi90%3284 fps97.9%
IMR 4198<<locked>>86%42,598 psi86%3136 fps99.5%
Norma 200<<locked>>82%42,496 psi86%3143 fps99.4%
Norma 202<<locked>>96%44,092 psi89%3205 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%32,938 psi67%2172 fps100%
SNPE Vectan SP 10<<locked>>86%44,541 psi90%3209 fps95.9%
SNPE Vectan SP 3<<locked>>88%44,396 psi90%3199 fps97.8%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%43,323 psi88%3097 fps96.8%
Somchem S335<<locked>>94%44,019 psi89%3123 fps96.8%
Vihtavuori N120<<locked>>84%43,221 psi88%3104 fps100%
Vihtavuori N130<<locked>>90%44,048 psi89%3133 fps99.1%
Vihtavuori N133<<locked>>96%43,105 psi87%3120 fps98.2%
Vihtavuori N135<<locked>>98%42,337 psi86%3189 fps98.4%
Vihtavuori N140<<locked>>98%43,816 psi89%3169 fps96.3%
Vihtavuori N540<<locked>>98%44,106 psi89%3199 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 201522.1 gr82%32,764 psi66%2894 fps95.2%
Accurate 249524.2 gr88%30,879 psi63%2907 fps95%
Accurate 4064<<locked>>98%39,595 psi80%3140 fps95.2%
Accurate LT-30<<locked>>80%38,740 psi79%2966 fps95.6%
ADI AR 2207<<locked>>80%40,698 psi83%3104 fps100%
ADI AR 2219<<locked>>82%38,667 psi78%3091 fps95.3%
Alliant AR-Comp21.8 gr80%28,152 psi57%2838 fps95.9%
Alliant Reloder-10x<<locked>>80%34,722 psi70%2979 fps97.2%
Baschieri & Pellagri 106<<locked>>80%37,086 psi75%2930 fps95.6%
Hodgdon H322<<locked>>88%39,537 psi80%3110 fps95.6%
Hodgdon H4198<<locked>>80%39,697 psi81%3005 fps95.1%
Hodgdon TrailBoss<<locked>>80%24,424 psi50%1906 fps100%
IMR 3031<<locked>>94%37,115 psi75%3110 fps95.8%
IMR 4198<<locked>>80%35,969 psi73%2979 fps98.3%
Norma 200<<locked>>80%39,755 psi81%3081 fps99%
Norma 202<<locked>>94%41,698 psi85%3153 fps95.2%
ReloadSwiss RS 14<<locked>>80%24,207 psi49%1946 fps100%
SNPE Vectan SP 10<<locked>>84%41,814 psi85%3150 fps95%
SNPE Vectan SP 3<<locked>>80%34,998 psi71%2972 fps95%
SNPE Vectan Tubal 5000<<locked>>96%38,392 psi78%2989 fps95.3%
Somchem S335<<locked>>90%39,204 psi80%3018 fps95.4%
Vihtavuori N120<<locked>>80%38,116 psi77%3002 fps100%
Vihtavuori N130<<locked>>80%32,764 psi66%2861 fps96.2%
Vihtavuori N133<<locked>>88%34,214 psi69%2910 fps95.6%
Vihtavuori N135<<locked>>90%33,083 psi67%2959 fps95.6%
Vihtavuori N140<<locked>>96%41,510 psi84%3120 fps95.6%
Vihtavuori N540<<locked>>96%41,394 psi84%3140 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 5.6 x 50 R Mag. loaded with the .227 | 50gr | Impala RNFP KO. IMR 3031 delivers the highest muzzle velocity at 3,284 fps; across all powders the maximum-charge window runs from 2,123 fps to 3,284 fps. Accurate 4064 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.227" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Accurate 4064, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Accurate 2015, Accurate 2495 rank at the top here: for 5.6 x 50 R Mag. with the .227 | 50gr | Impala RNFP KO they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data