
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .227 | 45gr | Reichenberg Spezial Jagd bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, SNPE Vectan SP 3 and Alliant Reloder-10x.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 43,105 psi | 87% | 3225 fps | 98.4% |
| Accurate 2015 | <<locked>> | 96% | 42,960 psi | 87% | 3301 fps | 97.5% |
| Accurate 2495ᴾ | <<locked>> | 100% | 37,014 psi | 75% | 3228 fps | 96.5% |
| Accurate LT-30 | <<locked>> | 88% | 44,251 psi | 90% | 3238 fps | 96.3% |
| ADI AR 2207 | <<locked>> | 86% | 42,873 psi | 87% | 3320 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 44,324 psi | 90% | 3373 fps | 96.1% |
| Alliant AR-Comp | <<locked>> | 98% | 42,076 psi | 85% | 3383 fps | 99.4% |
| Alliant Reloder-10x | <<locked>> | 92% | 43,265 psi | 88% | 3346 fps | 98.5% |
| Alliant Reloder-7 | <<locked>> | 84% | 42,279 psi | 86% | 3264 fps | 98.7% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 42,554 psi | 86% | 3199 fps | 96.3% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,966 psi | 63% | 2218 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 43,033 psi | 87% | 3406 fps | 96.7% |
| IMR 4198 | <<locked>> | 90% | 42,612 psi | 86% | 3294 fps | 99% |
| Lovex S053 | <<locked>> | 82% | 44,150 psi | 90% | 3255 fps | 100% |
| Norma 200 | <<locked>> | 88% | 43,352 psi | 88% | 3330 fps | 99.1% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,763 psi | 62% | 2267 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 43,018 psi | 87% | 3074 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 44,266 psi | 90% | 3350 fps | 97% |
| Vihtavuori N120 | <<locked>> | 86% | 42,989 psi | 87% | 3274 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 44,295 psi | 90% | 3291 fps | 98.5% |
| Vihtavuori N133 | <<locked>> | 98% | 43,613 psi | 88% | 3271 fps | 97.5% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 38,696 psi | 78% | 3258 fps | 96.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 40,292 psi | 82% | 3163 fps | 97.8% |
| Accurate 2015 | <<locked>> | 90% | 35,056 psi | 71% | 3114 fps | 95.1% |
| Accurate 2495 | <<locked>> | 98% | 34,287 psi | 70% | 3156 fps | 95.5% |
| Accurate LT-30 | <<locked>> | 86% | 41,321 psi | 84% | 3176 fps | 95.4% |
| ADI AR 2207 | <<locked>> | 80% | 35,302 psi | 72% | 3146 fps | 99.4% |
| ADI AR 2219 | <<locked>> | 88% | 41,350 psi | 84% | 3304 fps | 95.1% |
| Alliant AR-Comp | 24.4 gr | 88% | 30,632 psi | 62% | 3068 fps | 96% |
| Alliant Reloder-10x | 22.7 gr | 84% | 33,663 psi | 68% | 3110 fps | 95.9% |
| Alliant Reloder-7 | <<locked>> | 80% | 36,753 psi | 75% | 3133 fps | 97.4% |
| Baschieri & Pellagri 106 | <<locked>> | 86% | 39,914 psi | 81% | 3140 fps | 95.5% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,742 psi | 46% | 1995 fps | 100% |
| IMR 3031 | <<locked>> | 98% | 40,132 psi | 81% | 3333 fps | 95.8% |
| IMR 4198 | <<locked>> | 80% | 31,459 psi | 64% | 3002 fps | 95.9% |
| Lovex S053 | <<locked>> | 80% | 41,611 psi | 84% | 3202 fps | 100% |
| Norma 200 | <<locked>> | 80% | 33,518 psi | 68% | 3091 fps | 96.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,742 psi | 46% | 2047 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 38,682 psi | 78% | 2992 fps | 100% |
| SNPE Vectan SP 3 | 23.8 gr | 88% | 38,914 psi | 79% | 3228 fps | 95.4% |
| Vihtavuori N120 | <<locked>> | 80% | 35,491 psi | 72% | 3110 fps | 99.9% |
| Vihtavuori N130 | <<locked>> | 84% | 32,358 psi | 66% | 3002 fps | 95.1% |
| Vihtavuori N133 | <<locked>> | 92% | 36,230 psi | 73% | 3104 fps | 95.4% |
| Vihtavuori N135 | <<locked>> | 98% | 36,042 psi | 73% | 3189 fps | 95.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for 5.6 x 50 R Mag. loaded with the .227 | 45gr | Reichenberg Spezial Jagd. IMR 3031 delivers the highest muzzle velocity at 3,406 fps; across all powders the maximum-charge window runs from 2,218 fps to 3,406 fps. Accurate 2495 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 62–90 %, leaving at least 10 % headroom. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, SNPE Vectan SP 3, Alliant Reloder-10x rank at the top here: for 5.6 x 50 R Mag. with the .227 | 45gr | Reichenberg Spezial Jagd they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.