
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .224 | 69gr | Sierra MatchKing bullet and 47 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, IMR 3031 and Accurate 4064.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 88% | 43,932 psi | 89% | 2772 fps | 99.9% |
| Accurate 2460 | <<locked>> | 84% | 42,221 psi | 86% | 2766 fps | 98.3% |
| Accurate 2495 | <<locked>> | 94% | 42,569 psi | 86% | 2808 fps | 100% |
| Accurate 2520 | <<locked>> | 90% | 43,888 psi | 89% | 2844 fps | 98.3% |
| Accurate 4064 | <<locked>> | 96% | 42,279 psi | 86% | 2825 fps | 98.9% |
| ADI AR 2219 | <<locked>> | 82% | 43,859 psi | 89% | 2822 fps | 99.4% |
| ADI Benchmark 8208 | <<locked>> | 88% | 42,699 psi | 87% | 2776 fps | 96.3% |
| Alliant AR-Comp | <<locked>> | 90% | 43,671 psi | 89% | 2851 fps | 100% |
| Alliant Reloder- TS 15.5 | <<locked>> | 96% | 42,380 psi | 86% | 2818 fps | 95.9% |
| Alliant Reloder-10x | <<locked>> | 84% | 44,396 psi | 90% | 2799 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 44,193 psi | 90% | 2717 fps | 99.6% |
| Bofors RP3 | <<locked>> | 96% | 41,930 psi | 85% | 2818 fps | 95.9% |
| Hodgdon Benchmark | <<locked>> | 86% | 42,583 psi | 86% | 2730 fps | 96.9% |
| Hodgdon BL-C2 | <<locked>> | 90% | 43,613 psi | 88% | 2848 fps | 97.3% |
| Hodgdon H322 | <<locked>> | 86% | 42,293 psi | 86% | 2792 fps | 99.2% |
| Hodgdon H335 | <<locked>> | 82% | 43,207 psi | 88% | 2808 fps | 98.7% |
| Hodgdon LEVERevolution | <<locked>> | 96% | 44,425 psi | 90% | 2887 fps | 96.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 33,214 psi | 67% | 1814 fps | 100% |
| IMR 3031 | <<locked>> | 94% | 42,714 psi | 87% | 2861 fps | 99.7% |
| IMR 4198 | <<locked>> | 82% | 42,583 psi | 86% | 2726 fps | 100% |
| IMR 8208 XBR | <<locked>> | 88% | 42,699 psi | 87% | 2776 fps | 96.3% |
| Lovex D073.5 | <<locked>> | 84% | 41,989 psi | 85% | 2759 fps | 97.2% |
| Lovex D073.6 | <<locked>> | 92% | 43,888 psi | 89% | 2844 fps | 98.3% |
| Lovex S062 | <<locked>> | 94% | 42,786 psi | 87% | 2792 fps | 96.5% |
| Norma 201 | <<locked>> | 90% | 41,930 psi | 85% | 2759 fps | 96.2% |
| Norma 202 | <<locked>> | 90% | 42,206 psi | 86% | 2789 fps | 98.6% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 33,417 psi | 68% | 1857 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 84% | 42,641 psi | 86% | 2776 fps | 97.7% |
| ReloadSwiss RS 60 | <<locked>> | 98% | 42,902 psi | 87% | 2897 fps | 97.6% |
| Rottweil R 901 | <<locked>> | 88% | 43,221 psi | 88% | 2776 fps | 98.5% |
| Rottweil R 902 | <<locked>> | 92% | 42,293 psi | 86% | 2759 fps | 96.3% |
| Rottweil R 903ᴾ | <<locked>> | 100% | 44,498 psi | 90% | 2858 fps | 96.2% |
| Shooters World Match Rifle | <<locked>> | 92% | 43,888 psi | 89% | 2844 fps | 98.3% |
| Shooters World Precision | <<locked>> | 94% | 42,786 psi | 87% | 2792 fps | 96.5% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 44,498 psi | 90% | 2825 fps | 98.8% |
| SNPE Vectan SP 3 | <<locked>> | 82% | 42,105 psi | 85% | 2756 fps | 99.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 90% | 44,367 psi | 90% | 2743 fps | 98.8% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 43,700 psi | 89% | 2740 fps | 99.4% |
| Somchem S321 | <<locked>> | 86% | 43,453 psi | 88% | 2812 fps | 96.9% |
| Somchem S335 | <<locked>> | 90% | 43,337 psi | 88% | 2740 fps | 99.2% |
| Vihtavuori N130 | <<locked>> | 86% | 43,888 psi | 89% | 2736 fps | 100% |
| Vihtavuori N133 | <<locked>> | 92% | 43,613 psi | 88% | 2743 fps | 99.9% |
| Vihtavuori N135 | <<locked>> | 94% | 43,366 psi | 88% | 2812 fps | 100% |
| Vihtavuori N140 | <<locked>> | 92% | 41,568 psi | 84% | 2753 fps | 98.7% |
| Vihtavuori N530 | <<locked>> | 86% | 42,250 psi | 86% | 2779 fps | 96.4% |
| Vihtavuori N540 | <<locked>> | 94% | 44,150 psi | 90% | 2825 fps | 98.8% |
| Winchester 748 | <<locked>> | 86% | 42,148 psi | 85% | 2825 fps | 97.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 33,953 psi | 69% | 2572 fps | 98.8% |
| Accurate 2460 | <<locked>> | 80% | 36,535 psi | 74% | 2644 fps | 96.9% |
| Accurate 2495 | <<locked>> | 80% | 26,585 psi | 54% | 2441 fps | 96.9% |
| Accurate 2520 | <<locked>> | 82% | 32,982 psi | 67% | 2612 fps | 95.2% |
| Accurate 4064 | 22.8 gr | 86% | 30,719 psi | 62% | 2566 fps | 95.8% |
| ADI AR 2219 | <<locked>> | 80% | 41,249 psi | 84% | 2772 fps | 99% |
| ADI Benchmark 8208 | <<locked>> | 86% | 40,292 psi | 82% | 2726 fps | 95.6% |
| Alliant AR-Comp | <<locked>> | 80% | 31,386 psi | 64% | 2595 fps | 99.8% |
| Alliant Reloder- TS 15.5 | <<locked>> | 94% | 39,450 psi | 80% | 2756 fps | 95% |
| Alliant Reloder-10x | <<locked>> | 80% | 38,769 psi | 79% | 2694 fps | 99.9% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 41,292 psi | 84% | 2664 fps | 99.3% |
| Bofors RP3 | <<locked>> | 94% | 38,870 psi | 79% | 2756 fps | 95% |
| Hodgdon Benchmark | <<locked>> | 82% | 37,956 psi | 77% | 2631 fps | 95.5% |
| Hodgdon BL-C2 | <<locked>> | 86% | 37,739 psi | 77% | 2726 fps | 95.6% |
| Hodgdon H322 | <<locked>> | 80% | 34,650 psi | 70% | 2628 fps | 97.6% |
| Hodgdon H335 | <<locked>> | 80% | 40,219 psi | 82% | 2749 fps | 98.1% |
| Hodgdon LEVERevolution | <<locked>> | 94% | 41,437 psi | 84% | 2825 fps | 95.6% |
| Hodgdon TrailBoss | <<locked>> | 80% | 24,627 psi | 50% | 1624 fps | 100% |
| IMR 3031 | 20.2 gr | 80% | 27,224 psi | 55% | 2484 fps | 95.6% |
| IMR 4198 | <<locked>> | 80% | 39,987 psi | 81% | 2677 fps | 100% |
| IMR 8208 XBR | <<locked>> | 86% | 40,292 psi | 82% | 2726 fps | 95.6% |
| Lovex D073.5 | <<locked>> | 80% | 36,318 psi | 74% | 2641 fps | 95.5% |
| Lovex D073.6 | <<locked>> | 84% | 32,982 psi | 67% | 2612 fps | 95.2% |
| Lovex S062 | <<locked>> | 92% | 39,842 psi | 81% | 2733 fps | 95.6% |
| Norma 201 | <<locked>> | 88% | 39,479 psi | 80% | 2710 fps | 95.5% |
| Norma 202 | <<locked>> | 82% | 32,329 psi | 66% | 2569 fps | 95.8% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 24,468 psi | 50% | 1660 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 80% | 37,391 psi | 76% | 2664 fps | 96.3% |
| ReloadSwiss RS 60 | 26.7 gr | 94% | 37,797 psi | 77% | 2776 fps | 95.7% |
| Rottweil R 901 | <<locked>> | 80% | 34,142 psi | 69% | 2575 fps | 96.1% |
| Rottweil R 902 | <<locked>> | 90% | 39,885 psi | 81% | 2710 fps | 95.5% |
| Rottweil R 903 | <<locked>> | 98% | 41,307 psi | 84% | 2795 fps | 95.3% |
| Shooters World Match Rifle | <<locked>> | 84% | 32,982 psi | 67% | 2612 fps | 95.2% |
| Shooters World Precision | <<locked>> | 92% | 39,842 psi | 81% | 2733 fps | 95.6% |
| SNPE Vectan SP 10 | <<locked>> | 80% | 41,466 psi | 84% | 2769 fps | 98.3% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 39,537 psi | 80% | 2703 fps | 99.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 80% | 32,634 psi | 66% | 2493 fps | 95.8% |
| SNPE Vectan Tubal 5000 | <<locked>> | 82% | 28,094 psi | 57% | 2395 fps | 95.2% |
| Somchem S321 | <<locked>> | 82% | 37,724 psi | 77% | 2690 fps | 95.2% |
| Somchem S335 | <<locked>> | 80% | 31,995 psi | 65% | 2497 fps | 96.6% |
| Vihtavuori N130 | <<locked>> | 80% | 36,143 psi | 73% | 2585 fps | 99.6% |
| Vihtavuori N133 | <<locked>> | 80% | 30,168 psi | 61% | 2457 fps | 97.6% |
| Vihtavuori N135 | <<locked>> | 80% | 27,427 psi | 56% | 2457 fps | 97% |
| Vihtavuori N140 | <<locked>> | 82% | 30,371 psi | 62% | 2500 fps | 95.4% |
| Vihtavuori N530 | <<locked>> | 84% | 39,726 psi | 81% | 2730 fps | 95.6% |
| Vihtavuori N540 | <<locked>> | 84% | 32,010 psi | 65% | 2562 fps | 95.5% |
| Winchester 748 | <<locked>> | 82% | 36,521 psi | 74% | 2703 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 79 powders for 5.6 x 50 R Mag. loaded with the .224 | 69gr | Sierra MatchKing. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,897 fps; across all powders the maximum-charge window runs from 1,814 fps to 2,897 fps. Alliant Reloder-17 gives the best case fill at 100 %, and 79 of the 79 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. The 69.0 gr projectile in 0.224" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-17, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, IMR 3031, Accurate 4064 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 69gr | Sierra MatchKing they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, ADI AR 2208, Alliant Power Pro 2000-MR, Alliant Reloder-15 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.