
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .224 | 55gr | Sierra SP SemiSp bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Hodgdon H322.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 92% | 44,208 psi | 90% | 3081 fps | 99.3% |
| Accurate 2460 | <<locked>> | 88% | 42,830 psi | 87% | 3064 fps | 96.6% |
| Accurate 2495 | <<locked>> | 98% | 42,438 psi | 86% | 3104 fps | 99.3% |
| Accurate 2520 | <<locked>> | 94% | 44,237 psi | 90% | 3140 fps | 96.6% |
| Accurate 4064ᴾ | <<locked>> | 100% | 41,887 psi | 85% | 3110 fps | 97.3% |
| Accurate LT-30 | <<locked>> | 84% | 44,121 psi | 89% | 3002 fps | 98.2% |
| Accurate LT-32 | <<locked>> | 84% | 44,512 psi | 90% | 3009 fps | 96.4% |
| ADI AR 2207 | <<locked>> | 82% | 44,034 psi | 89% | 3071 fps | 100% |
| ADI AR 2219 | <<locked>> | 84% | 42,163 psi | 86% | 3087 fps | 97.7% |
| Alliant AR-Comp | <<locked>> | 94% | 43,859 psi | 89% | 3169 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 86% | 42,177 psi | 86% | 3068 fps | 99.6% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 42,670 psi | 87% | 2976 fps | 98.3% |
| Hodgdon H322 | <<locked>> | 90% | 42,685 psi | 87% | 3097 fps | 97.8% |
| Hodgdon H335 | <<locked>> | 86% | 44,512 psi | 90% | 3127 fps | 97.3% |
| Hodgdon H4198 | <<locked>> | 82% | 42,902 psi | 87% | 2999 fps | 97.4% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,619 psi | 66% | 2044 fps | 100% |
| IMR 3031 | <<locked>> | 98% | 42,859 psi | 87% | 3166 fps | 98.6% |
| IMR 4198 | <<locked>> | 86% | 43,294 psi | 88% | 3054 fps | 99.9% |
| Lovex D073.6 | <<locked>> | 96% | 43,656 psi | 89% | 3127 fps | 96.4% |
| Norma 200 | <<locked>> | 84% | 44,469 psi | 90% | 3094 fps | 99.9% |
| Norma 202 | <<locked>> | 94% | 42,395 psi | 86% | 3084 fps | 96.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 32,155 psi | 65% | 2083 fps | 100% |
| Rottweil R 901 | <<locked>> | 92% | 43,468 psi | 88% | 3074 fps | 96.7% |
| Shooters World Match Rifle | <<locked>> | 96% | 43,656 psi | 89% | 3127 fps | 96.4% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 42,540 psi | 86% | 3081 fps | 96.7% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 42,569 psi | 86% | 3068 fps | 98.5% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 42,496 psi | 86% | 2992 fps | 96.6% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 44,164 psi | 90% | 3031 fps | 98.1% |
| Somchem S335 | <<locked>> | 94% | 44,425 psi | 90% | 3051 fps | 98% |
| Vihtavuori N120 | <<locked>> | 84% | 43,700 psi | 89% | 3012 fps | 100% |
| Vihtavuori N130 | <<locked>> | 90% | 44,309 psi | 90% | 3048 fps | 99.7% |
| Vihtavuori N133 | <<locked>> | 96% | 44,077 psi | 89% | 3051 fps | 99.2% |
| Vihtavuori N135 | <<locked>> | 98% | 43,294 psi | 88% | 3117 fps | 99.3% |
| Vihtavuori N140 | <<locked>> | 96% | 42,163 psi | 86% | 3051 fps | 97.1% |
| Vihtavuori N540 | <<locked>> | 96% | 41,930 psi | 85% | 3068 fps | 96.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 29,979 psi | 61% | 2743 fps | 95.5% |
| Accurate 2460 | <<locked>> | 86% | 39,987 psi | 81% | 3002 fps | 95.8% |
| Accurate 2495 | <<locked>> | 86% | 27,876 psi | 57% | 2746 fps | 95.1% |
| Accurate 2520 | <<locked>> | 92% | 41,176 psi | 84% | 3077 fps | 95.7% |
| Accurate 4064 | <<locked>> | 96% | 36,738 psi | 75% | 2992 fps | 95.7% |
| Accurate LT-30 | <<locked>> | 80% | 38,928 psi | 79% | 2890 fps | 97% |
| Accurate LT-32 | <<locked>> | 82% | 41,611 psi | 84% | 2946 fps | 95.6% |
| ADI AR 2207 | <<locked>> | 80% | 40,988 psi | 83% | 3012 fps | 100% |
| ADI AR 2219 | <<locked>> | 80% | 36,637 psi | 74% | 2959 fps | 96.1% |
| Alliant AR-Comp | 22.2 gr | 80% | 27,644 psi | 56% | 2756 fps | 97.2% |
| Alliant Reloder-10x | <<locked>> | 80% | 34,505 psi | 70% | 2890 fps | 98.2% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 37,521 psi | 76% | 2864 fps | 97% |
| Hodgdon H322 | 23.4 gr | 84% | 35,375 psi | 72% | 2927 fps | 95.6% |
| Hodgdon H335 | <<locked>> | 82% | 38,348 psi | 78% | 2992 fps | 95.5% |
| Hodgdon H4198 | <<locked>> | 80% | 40,045 psi | 81% | 2933 fps | 96.6% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,743 psi | 48% | 1827 fps | 100% |
| IMR 3031 | 24.1 gr | 90% | 33,112 psi | 67% | 2923 fps | 95.7% |
| IMR 4198 | <<locked>> | 80% | 36,274 psi | 74% | 2900 fps | 99.2% |
| Lovex D073.6 | <<locked>> | 94% | 41,176 psi | 84% | 3077 fps | 95.7% |
| Norma 200 | <<locked>> | 80% | 39,146 psi | 79% | 2982 fps | 99.5% |
| Norma 202 | <<locked>> | 90% | 37,362 psi | 76% | 2969 fps | 95.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,873 psi | 48% | 1873 fps | 100% |
| Rottweil R 901 | <<locked>> | 88% | 38,899 psi | 79% | 2972 fps | 95.4% |
| Shooters World Match Rifle | <<locked>> | 94% | 41,176 psi | 84% | 3077 fps | 95.7% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 39,740 psi | 81% | 3018 fps | 95.8% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 35,143 psi | 71% | 2897 fps | 96.5% |
| SNPE Vectan Tubal 3000 | <<locked>> | 88% | 37,362 psi | 76% | 2881 fps | 95.1% |
| SNPE Vectan Tubal 5000 | <<locked>> | 92% | 34,171 psi | 69% | 2815 fps | 95.3% |
| Somchem S335 | <<locked>> | 86% | 34,432 psi | 70% | 2828 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 38,319 psi | 78% | 2910 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 32,460 psi | 66% | 2779 fps | 97.4% |
| Vihtavuori N133 | <<locked>> | 84% | 30,371 psi | 62% | 2730 fps | 95.5% |
| Vihtavuori N135 | <<locked>> | 86% | 29,124 psi | 59% | 2769 fps | 95.3% |
| Vihtavuori N140 | <<locked>> | 92% | 36,753 psi | 75% | 2930 fps | 95.5% |
| Vihtavuori N540 | <<locked>> | 92% | 36,999 psi | 75% | 2956 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for 5.6 x 50 R Mag. loaded with the .224 | 55gr | Sierra SP SemiSp. Alliant AR-Comp delivers the highest muzzle velocity at 3,169 fps; across all powders the maximum-charge window runs from 2,044 fps to 3,169 fps. Accurate 4064 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Accurate 4064, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Hodgdon H322 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 55gr | Sierra SP SemiSp they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.