
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .224 | 54gr | Reichenberg Spezial Jagd bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Hodgdon H322 and IMR 3031.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 92% | 43,729 psi | 89% | 3094 fps | 99.1% |
| Accurate 2460 | <<locked>> | 88% | 41,858 psi | 85% | 3064 fps | 96.1% |
| Accurate 2495ᴾ | <<locked>> | 100% | 44,556 psi | 90% | 3169 fps | 99.5% |
| Accurate 2520 | <<locked>> | 94% | 43,163 psi | 88% | 3140 fps | 96% |
| Accurate 4064ᴾ | <<locked>> | 100% | 41,307 psi | 84% | 3117 fps | 96.9% |
| Accurate LT-30 | <<locked>> | 84% | 43,308 psi | 88% | 3005 fps | 97.9% |
| Accurate LT-32 | <<locked>> | 84% | 43,685 psi | 89% | 3012 fps | 96% |
| ADI AR 2207 | <<locked>> | 82% | 43,062 psi | 87% | 3077 fps | 100% |
| ADI AR 2219 | <<locked>> | 86% | 44,266 psi | 90% | 3156 fps | 98% |
| Alliant AR-Comp | <<locked>> | 94% | 42,859 psi | 87% | 3173 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 88% | 43,729 psi | 89% | 3123 fps | 99.6% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 41,843 psi | 85% | 2979 fps | 97.9% |
| Hodgdon H322 | <<locked>> | 90% | 42,250 psi | 86% | 3110 fps | 97.5% |
| Hodgdon H335 | <<locked>> | 86% | 43,497 psi | 88% | 3127 fps | 96.8% |
| Hodgdon H4198 | <<locked>> | 82% | 42,090 psi | 85% | 3002 fps | 97% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,126 psi | 65% | 2051 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 44,469 psi | 90% | 3219 fps | 98.8% |
| IMR 4198 | <<locked>> | 86% | 42,409 psi | 86% | 3061 fps | 99.8% |
| Lovex D073.6 | <<locked>> | 96% | 43,163 psi | 88% | 3140 fps | 96% |
| Norma 200 | <<locked>> | 84% | 43,961 psi | 89% | 3107 fps | 99.9% |
| Norma 202 | <<locked>> | 96% | 44,483 psi | 90% | 3150 fps | 97.1% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 32,111 psi | 65% | 2100 fps | 100% |
| Rottweil R 901 | <<locked>> | 92% | 43,076 psi | 87% | 3087 fps | 96.4% |
| Shooters World Match Rifle | <<locked>> | 96% | 43,163 psi | 88% | 3140 fps | 96% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 42,076 psi | 85% | 3094 fps | 96.3% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 42,119 psi | 85% | 3081 fps | 98.2% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 42,148 psi | 85% | 3005 fps | 96.3% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 43,221 psi | 88% | 3035 fps | 97.8% |
| Somchem S335 | <<locked>> | 94% | 43,540 psi | 88% | 3054 fps | 97.7% |
| Vihtavuori N120 | <<locked>> | 84% | 42,757 psi | 87% | 3018 fps | 100% |
| Vihtavuori N130 | <<locked>> | 90% | 43,932 psi | 89% | 3061 fps | 99.5% |
| Vihtavuori N133 | <<locked>> | 96% | 43,163 psi | 88% | 3054 fps | 98.9% |
| Vihtavuori N135 | <<locked>> | 98% | 42,264 psi | 86% | 3117 fps | 99.1% |
| Vihtavuori N140 | <<locked>> | 98% | 44,208 psi | 90% | 3114 fps | 97.5% |
| Vihtavuori N540 | <<locked>> | 98% | 43,961 psi | 89% | 3130 fps | 96.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 29,602 psi | 60% | 2753 fps | 95.1% |
| Accurate 2460 | <<locked>> | 86% | 39,073 psi | 79% | 3002 fps | 95.3% |
| Accurate 2495 | <<locked>> | 88% | 29,182 psi | 59% | 2808 fps | 95.5% |
| Accurate 2520 | <<locked>> | 92% | 40,176 psi | 81% | 3074 fps | 95.1% |
| Accurate 4064 | <<locked>> | 96% | 36,230 psi | 73% | 3002 fps | 95.3% |
| Accurate LT-30 | <<locked>> | 80% | 38,232 psi | 78% | 2894 fps | 96.6% |
| Accurate LT-32 | <<locked>> | 82% | 41,249 psi | 84% | 2959 fps | 95.3% |
| ADI AR 2207 | <<locked>> | 80% | 40,567 psi | 82% | 3028 fps | 100% |
| ADI AR 2219 | <<locked>> | 80% | 35,868 psi | 73% | 2959 fps | 95.5% |
| Alliant AR-Comp | 22.1 gr | 80% | 26,992 psi | 55% | 2756 fps | 96.6% |
| Alliant Reloder-10x | <<locked>> | 80% | 34,113 psi | 69% | 2904 fps | 97.9% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 36,811 psi | 75% | 2867 fps | 96.6% |
| Hodgdon H322 | 23.3 gr | 84% | 34,664 psi | 70% | 2927 fps | 95% |
| Hodgdon H335 | <<locked>> | 82% | 37,956 psi | 77% | 3005 fps | 95.1% |
| Hodgdon H4198 | <<locked>> | 80% | 39,740 psi | 81% | 2949 fps | 96.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,714 psi | 48% | 1844 fps | 100% |
| IMR 3031 | 24.1 gr | 90% | 32,721 psi | 66% | 2933 fps | 95.3% |
| IMR 4198 | <<locked>> | 80% | 35,549 psi | 72% | 2904 fps | 99% |
| Lovex D073.6 | <<locked>> | 94% | 40,176 psi | 81% | 3074 fps | 95.1% |
| Norma 200 | <<locked>> | 80% | 38,725 psi | 79% | 2995 fps | 99.4% |
| Norma 202 | <<locked>> | 92% | 39,117 psi | 79% | 3031 fps | 95.6% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,830 psi | 48% | 1893 fps | 100% |
| Rottweil R 901 | <<locked>> | 90% | 40,263 psi | 82% | 3025 fps | 95.6% |
| Shooters World Match Rifle | <<locked>> | 94% | 40,176 psi | 81% | 3074 fps | 95.1% |
| SNPE Vectan SP 10 | <<locked>> | 82% | 39,334 psi | 80% | 3031 fps | 95.5% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 34,403 psi | 70% | 2897 fps | 96% |
| SNPE Vectan Tubal 3000 | <<locked>> | 90% | 39,262 psi | 80% | 2943 fps | 95.4% |
| SNPE Vectan Tubal 5000 | <<locked>> | 94% | 35,868 psi | 73% | 2874 fps | 95.7% |
| Somchem S335 | <<locked>> | 88% | 35,998 psi | 73% | 2887 fps | 95.5% |
| Vihtavuori N120 | <<locked>> | 80% | 37,971 psi | 77% | 2927 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 32,111 psi | 65% | 2792 fps | 97.1% |
| Vihtavuori N133 | <<locked>> | 84% | 30,066 psi | 61% | 2740 fps | 95.1% |
| Vihtavuori N135 | <<locked>> | 88% | 30,560 psi | 62% | 2835 fps | 95.8% |
| Vihtavuori N140 | <<locked>> | 92% | 36,390 psi | 74% | 2943 fps | 95.1% |
| Vihtavuori N540 | <<locked>> | 94% | 38,769 psi | 79% | 3018 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for 5.6 x 50 R Mag. loaded with the .224 | 54gr | Reichenberg Spezial Jagd. IMR 3031 delivers the highest muzzle velocity at 3,219 fps; across all powders the maximum-charge window runs from 2,051 fps to 3,219 fps. Accurate 2495 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 54.0 gr projectile in 0.224" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Hodgdon H322, IMR 3031 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 54gr | Reichenberg Spezial Jagd they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.