Load data for 5.6 x 50 R Mag. + .224 | 50gr | Speer MHP

5.6 x 50 R Mag. cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:12.0

Load data in caliber 5.6 x 50 R Mag. with .224 | 50gr | Speer MHP bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Hodgdon H322 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>94%43,961 psi89%3192 fps98.6%
Accurate 2495ᴾ<<locked>>100%41,089 psi83%3196 fps98.5%
Accurate LT-30<<locked>>86%44,005 psi89%3110 fps97.3%
ADI AR 2207<<locked>>84%43,569 psi88%3192 fps100%
ADI AR 2219<<locked>>88%44,614 psi90%3255 fps97.3%
Alliant AR-Comp<<locked>>96%42,989 psi87%3274 fps99.9%
Alliant Reloder-10x<<locked>>90%44,077 psi89%3228 fps99.3%
Alliant Reloder-7<<locked>>82%42,279 psi86%3130 fps99.3%
Baschieri & Pellagri 106<<locked>>86%42,656 psi87%3084 fps97.4%
Hodgdon H322<<locked>>92%42,554 psi86%3209 fps96.8%
Hodgdon H335<<locked>>88%44,193 psi90%3232 fps96.2%
Hodgdon H4198<<locked>>84%42,815 psi87%3107 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%32,039 psi65%2129 fps100%
IMR 3031ᴾ<<locked>>100%42,018 psi85%3261 fps97.6%
IMR 4198<<locked>>88%43,047 psi87%3173 fps99.6%
Norma 200<<locked>>86%44,237 psi90%3212 fps99.7%
Norma 202<<locked>>98%44,599 psi90%3241 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%31,488 psi64%2169 fps100%
SNPE Vectan BA6 1/2<<locked>>82%43,511 psi88%2940 fps100%
SNPE Vectan SP 3<<locked>>88%41,974 psi85%3173 fps97.5%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%41,133 psi83%3081 fps96.5%
Somchem S335<<locked>>96%43,801 psi89%3146 fps97%
Vihtavuori N120<<locked>>86%43,294 psi88%3133 fps100%
Vihtavuori N130<<locked>>92%43,874 psi89%3156 fps99.2%
Vihtavuori N133<<locked>>98%43,511 psi88%3153 fps98.4%
Vihtavuori N135ᴾ<<locked>>100%42,264 psi86%3212 fps98.6%
Vihtavuori N140ᴾ<<locked>>100%44,382 psi90%3209 fps96.7%
Vihtavuori N540ᴾ<<locked>>100%44,527 psi90%3235 fps96.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%31,546 psi64%2897 fps95%
Accurate 2495<<locked>>92%31,154 psi63%2953 fps95.5%
Accurate LT-30<<locked>>80%36,666 psi74%2946 fps95.2%
ADI AR 2207<<locked>>80%38,189 psi77%3081 fps100%
ADI AR 2219<<locked>>84%39,233 psi80%3133 fps95.8%
Alliant AR-Comp22.7 gr82%27,195 psi55%2841 fps95.7%
Alliant Reloder-10x21.6 gr80%32,010 psi65%2940 fps96.4%
Alliant Reloder-7<<locked>>80%39,958 psi81%3077 fps99%
Baschieri & Pellagri 106<<locked>>80%35,186 psi71%2913 fps95.1%
Hodgdon H32224.5 gr88%37,449 psi76%3087 fps95.1%
Hodgdon H335<<locked>>86%41,321 psi84%3169 fps95.3%
Hodgdon H4198<<locked>>82%40,422 psi82%3054 fps95.6%
Hodgdon TrailBoss<<locked>>80%23,279 psi47%1906 fps100%
IMR 3031<<locked>>94%34,853 psi71%3081 fps95.2%
IMR 4198<<locked>>80%34,011 psi69%2956 fps98%
Norma 200<<locked>>80%36,332 psi74%3035 fps98.4%
Norma 202<<locked>>96%42,076 psi85%3189 fps95.6%
ReloadSwiss RS 14<<locked>>80%23,322 psi47%1955 fps100%
SNPE Vectan BA6 1/2<<locked>>80%41,075 psi83%2894 fps100%
SNPE Vectan SP 3<<locked>>82%34,722 psi70%2999 fps95.2%
SNPE Vectan Tubal 5000<<locked>>98%38,798 psi79%3028 fps95.7%
Somchem S335<<locked>>92%38,725 psi79%3038 fps95.6%
Vihtavuori N120<<locked>>80%35,708 psi72%2979 fps100%
Vihtavuori N130<<locked>>80%30,255 psi61%2825 fps95.5%
Vihtavuori N133<<locked>>88%32,184 psi65%2884 fps95.1%
Vihtavuori N135<<locked>>92%32,489 psi66%2976 fps95.7%
Vihtavuori N140<<locked>>96%39,102 psi79%3094 fps95.1%
Vihtavuori N540<<locked>>98%41,597 psi84%3169 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for 5.6 x 50 R Mag. loaded with the .224 | 50gr | Speer MHP. Alliant AR-Comp delivers the highest muzzle velocity at 3,274 fps; across all powders the maximum-charge window runs from 2,129 fps to 3,274 fps. Accurate 2495 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 64–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Hodgdon H322, Alliant Reloder-10x rank at the top here: for 5.6 x 50 R Mag. with the .224 | 50gr | Speer MHP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data