Load data for 5.6 x 50 R Mag. + .224 | 50gr | Lapua Naturalis

5.6 x 50 R Mag. cartridge drawing
Lapua logo

Load Specifications

Bullet Manufacturer:Lapua
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:11.5

Load data in caliber 5.6 x 50 R Mag. with .224 | 50gr | Lapua Naturalis bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, SNPE Vectan SP 3 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>92%42,931 psi87%3159 fps98.4%
Accurate 2495ᴾ<<locked>>100%43,903 psi89%3238 fps98.9%
Accurate LT-30<<locked>>84%42,525 psi86%3068 fps96.9%
ADI AR 2207<<locked>>82%42,279 psi86%3153 fps100%
ADI AR 2219<<locked>>86%43,221 psi88%3212 fps96.9%
Alliant AR-Comp<<locked>>94%41,829 psi85%3235 fps99.8%
Alliant Reloder-10x<<locked>>88%42,975 psi87%3192 fps99.1%
Alliant Reloder-7<<locked>>82%44,063 psi89%3153 fps99.5%
Baschieri & Pellagri 106<<locked>>86%44,150 psi90%3104 fps97.7%
Hodgdon H322<<locked>>92%43,700 psi89%3225 fps97%
Hodgdon H4198<<locked>>84%44,164 psi90%3123 fps96.6%
Hodgdon TrailBossᴾ<<locked>>100%32,372 psi66%2126 fps100%
IMR 3031ᴾ<<locked>>100%43,323 psi88%3278 fps97.8%
IMR 4198<<locked>>88%44,411 psi90%3189 fps99.7%
Norma 200<<locked>>84%43,569 psi88%3182 fps99.6%
Norma 202<<locked>>96%43,439 psi88%3205 fps95.9%
ReloadSwiss RS 14ᴾ<<locked>>100%32,387 psi66%2175 fps100%
SNPE Vectan SP 10<<locked>>86%44,048 psi89%3215 fps95.9%
SNPE Vectan SP 3<<locked>>88%43,555 psi88%3196 fps97.8%
SNPE Vectan Tubal 3000<<locked>>94%43,830 psi89%3114 fps95.8%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%42,279 psi86%3091 fps96.7%
Somchem S335<<locked>>94%42,830 psi87%3114 fps96.6%
Vihtavuori N120<<locked>>84%41,901 psi85%3094 fps100%
Vihtavuori N130<<locked>>90%43,105 psi87%3130 fps99%
Vihtavuori N133<<locked>>96%42,163 psi86%3114 fps98.1%
Vihtavuori N135ᴾ<<locked>>100%43,700 psi89%3228 fps98.7%
Vihtavuori N140<<locked>>98%43,207 psi88%3169 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%33,475 psi68%2933 fps95.7%
Accurate 2495<<locked>>90%31,473 psi64%2943 fps95.4%
Accurate LT-30<<locked>>80%37,637 psi76%2953 fps95.4%
ADI AR 2207<<locked>>80%39,842 psi81%3100 fps100%
ADI AR 2219<<locked>>82%37,739 psi77%3084 fps95.1%
Alliant AR-Comp22 gr80%26,890 psi55%2812 fps95.3%
Alliant Reloder-10x21.5 gr80%33,707 psi68%2969 fps96.9%
Alliant Reloder-7<<locked>>80%41,205 psi84%3094 fps99.1%
Baschieri & Pellagri 106<<locked>>80%36,201 psi73%2923 fps95.4%
Hodgdon H322<<locked>>88%38,580 psi78%3104 fps95.5%
Hodgdon H4198<<locked>>80%39,044 psi79%3009 fps95.1%
Hodgdon TrailBoss<<locked>>80%24,018 psi49%1913 fps100%
IMR 3031<<locked>>94%36,143 psi73%3100 fps95.6%
IMR 4198<<locked>>80%34,940 psi71%2966 fps98.2%
Norma 200<<locked>>80%38,508 psi78%3071 fps98.8%
Norma 202<<locked>>94%40,567 psi82%3143 fps95.1%
ReloadSwiss RS 14<<locked>>80%23,772 psi48%1949 fps100%
SNPE Vectan SP 10<<locked>>84%41,205 psi84%3150 fps95%
SNPE Vectan SP 322.1 gr82%36,230 psi73%3022 fps95.7%
SNPE Vectan Tubal 3000<<locked>>92%41,452 psi84%3064 fps95.1%
SNPE Vectan Tubal 5000<<locked>>96%37,826 psi77%2992 fps95.3%
Somchem S335<<locked>>90%38,087 psi77%3005 fps95.2%
Vihtavuori N120<<locked>>80%37,275 psi76%2999 fps100%
Vihtavuori N130<<locked>>80%31,821 psi65%2854 fps96%
Vihtavuori N133<<locked>>88%33,315 psi68%2900 fps95.5%
Vihtavuori N135<<locked>>90%31,952 psi65%2943 fps95.3%
Vihtavuori N140<<locked>>96%40,422 psi82%3110 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 5.6 x 50 R Mag. loaded with the .224 | 50gr | Lapua Naturalis. IMR 3031 delivers the highest muzzle velocity at 3,278 fps; across all powders the maximum-charge window runs from 2,126 fps to 3,278 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, SNPE Vectan SP 3, Alliant Reloder-10x rank at the top here: for 5.6 x 50 R Mag. with the .224 | 50gr | Lapua Naturalis they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data