Load data for 5.6 x 50 R Mag. + .224 | 50gr | Impala RNFP KO

5.6 x 50 R Mag. cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:10.5

Load data in caliber 5.6 x 50 R Mag. with .224 | 50gr | Impala RNFP KO bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Alliant Reloder-10x and Accurate 2495.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>92%43,801 psi89%3159 fps98.4%
Accurate 2495<<locked>>98%42,235 psi86%3189 fps98.5%
Accurate 4064ᴾ<<locked>>100%41,568 psi84%3186 fps95.8%
Accurate LT-30<<locked>>84%43,352 psi88%3071 fps96.9%
ADI AR 2207<<locked>>82%43,265 psi88%3159 fps100%
ADI AR 2219<<locked>>86%43,772 psi89%3209 fps96.8%
Alliant AR-Comp<<locked>>94%42,511 psi86%3238 fps99.8%
Alliant Reloder-10x<<locked>>88%44,092 psi89%3202 fps99.2%
Baschieri & Pellagri 106<<locked>>84%42,061 psi85%3045 fps97%
Hodgdon H322<<locked>>90%41,887 psi85%3166 fps96.3%
Hodgdon H4198<<locked>>84%44,498 psi90%3117 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%32,938 psi67%2123 fps100%
IMR 3031ᴾ<<locked>>100%44,063 psi89%3278 fps97.8%
IMR 4198<<locked>>86%42,235 psi86%3127 fps99.5%
Norma 200<<locked>>82%42,105 psi85%3133 fps99.3%
Norma 202<<locked>>96%44,222 psi90%3205 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%32,561 psi66%2162 fps100%
SNPE Vectan SP 3<<locked>>88%44,019 psi89%3189 fps97.7%
SNPE Vectan Tubal 3000<<locked>>94%44,527 psi90%3114 fps95.8%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%43,033 psi87%3094 fps96.7%
Somchem S335<<locked>>94%43,700 psi89%3117 fps96.7%
Vihtavuori N120<<locked>>84%42,801 psi87%3097 fps100%
Vihtavuori N130<<locked>>90%43,685 psi89%3127 fps99%
Vihtavuori N133<<locked>>96%42,815 psi87%3114 fps98.1%
Vihtavuori N135ᴾ<<locked>>100%44,483 psi90%3232 fps98.8%
Vihtavuori N140<<locked>>98%44,005 psi89%3173 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>82%32,518 psi66%2890 fps95.1%
Accurate 249524.7 gr90%32,851 psi67%2963 fps95.8%
Accurate 4064<<locked>>98%39,349 psi80%3133 fps95.1%
Accurate LT-30<<locked>>80%38,406 psi78%2956 fps95.5%
ADI AR 2207<<locked>>80%40,814 psi83%3107 fps100%
ADI AR 2219<<locked>>82%38,754 psi79%3094 fps95.3%
Alliant AR-Comp21.7 gr80%27,963 psi57%2831 fps95.7%
Alliant Reloder-10x21.2 gr80%34,853 psi71%2982 fps97.2%
Baschieri & Pellagri 106<<locked>>80%36,796 psi75%2923 fps95.4%
Hodgdon H322<<locked>>88%39,624 psi80%3114 fps95.6%
Hodgdon H4198<<locked>>80%39,856 psi81%3012 fps95.2%
Hodgdon TrailBoss<<locked>>80%24,468 psi50%1909 fps100%
IMR 3031<<locked>>94%36,912 psi75%3104 fps95.6%
IMR 4198<<locked>>80%35,694 psi72%2969 fps98.2%
Norma 200<<locked>>80%39,943 psi81%3084 fps99%
Norma 202<<locked>>94%41,379 psi84%3143 fps95.1%
ReloadSwiss RS 14<<locked>>80%24,265 psi49%1949 fps100%
SNPE Vectan SP 3<<locked>>82%37,159 psi75%3028 fps95.8%
SNPE Vectan Tubal 3000<<locked>>92%42,134 psi85%3061 fps95.1%
SNPE Vectan Tubal 5000<<locked>>96%38,508 psi78%2992 fps95.3%
Somchem S335<<locked>>90%38,885 psi79%3012 fps95.3%
Vihtavuori N120<<locked>>80%38,218 psi78%3002 fps100%
Vihtavuori N130<<locked>>80%32,880 psi67%2864 fps96.3%
Vihtavuori N133<<locked>>88%34,330 psi70%2910 fps95.7%
Vihtavuori N135<<locked>>90%33,185 psi67%2963 fps95.6%
Vihtavuori N140<<locked>>96%41,220 psi84%3114 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 5.6 x 50 R Mag. loaded with the .224 | 50gr | Impala RNFP KO. IMR 3031 delivers the highest muzzle velocity at 3,278 fps; across all powders the maximum-charge window runs from 2,123 fps to 3,278 fps. Accurate 4064 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 4064, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Alliant Reloder-10x, Accurate 2495 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 50gr | Impala RNFP KO they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data