Load data for 5.6 x 50 R Mag. + .224 | 50gr | Berger Target FB

5.6 x 50 R Mag. cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:11.5

Load data in caliber 5.6 x 50 R Mag. with .224 | 50gr | Berger Target FB bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Accurate 2015.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>94%43,366 psi88%3179 fps98.5%
Accurate 2495ᴾ<<locked>>100%41,104 psi83%3192 fps98.4%
Accurate LT-30<<locked>>86%44,005 psi89%3107 fps97.3%
ADI AR 2207<<locked>>84%43,511 psi88%3189 fps100%
ADI AR 2219<<locked>>86%41,597 psi84%3186 fps96.5%
Alliant AR-Comp<<locked>>96%42,496 psi86%3261 fps99.9%
Alliant Reloder-10x<<locked>>90%44,034 psi89%3225 fps99.3%
Alliant Reloder-7<<locked>>82%42,250 psi86%3127 fps99.3%
Baschieri & Pellagri 106<<locked>>86%42,743 psi87%3081 fps97.4%
Hodgdon H322<<locked>>90%43,076 psi87%3219 fps96.9%
Hodgdon H335<<locked>>90%44,266 psi90%3232 fps96.1%
Hodgdon H4198<<locked>>82%42,772 psi87%3104 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%31,821 psi65%2123 fps100%
IMR 3031<<locked>>98%43,555 psi88%3291 fps97.9%
IMR 4198<<locked>>88%42,989 psi87%3169 fps99.6%
Norma 200<<locked>>86%44,208 psi90%3212 fps99.7%
Norma 202<<locked>>98%44,150 psi90%3232 fps96.2%
ReloadSwiss RS 14ᴾ<<locked>>100%31,705 psi64%2172 fps100%
SNPE Vectan BA6 1/2<<locked>>82%43,424 psi88%2933 fps100%
SNPE Vectan SP 3<<locked>>90%44,541 psi90%3225 fps98%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%40,712 psi83%3068 fps96.3%
Somchem S335<<locked>>96%43,352 psi88%3136 fps96.8%
Vihtavuori N120<<locked>>84%43,613 psi88%3143 fps100%
Vihtavuori N130<<locked>>90%41,974 psi85%3114 fps98.8%
Vihtavuori N133<<locked>>96%43,830 psi89%3153 fps98.4%
Vihtavuori N135ᴾ<<locked>>100%41,727 psi85%3199 fps98.4%
Vihtavuori N140<<locked>>98%42,003 psi85%3150 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 201523.4 gr86%33,431 psi68%2946 fps95.7%
Accurate 2495<<locked>>92%30,719 psi62%2936 fps95.2%
Accurate LT-30<<locked>>80%36,230 psi73%2930 fps95%
ADI AR 2207<<locked>>80%38,087 psi77%3074 fps100%
ADI AR 2219<<locked>>84%38,769 psi79%3117 fps95.5%
Alliant AR-Comp22.6 gr82%27,122 psi55%2835 fps95.5%
Alliant Reloder-10x<<locked>>80%31,923 psi65%2933 fps96.4%
Alliant Reloder-7<<locked>>80%39,407 psi80%3064 fps98.8%
Baschieri & Pellagri 106<<locked>>82%37,101 psi75%2956 fps95.8%
Hodgdon H322<<locked>>86%37,898 psi77%3097 fps95.2%
Hodgdon H335<<locked>>88%41,336 psi84%3166 fps95.3%
Hodgdon H4198<<locked>>80%39,900 psi81%3038 fps95.4%
Hodgdon TrailBoss<<locked>>80%23,424 psi48%1909 fps100%
IMR 303125.3 gr92%35,636 psi72%3097 fps95.4%
IMR 4198<<locked>>80%33,562 psi68%2943 fps97.8%
Norma 200<<locked>>80%36,260 psi74%3031 fps98.4%
Norma 202<<locked>>96%41,568 psi84%3176 fps95.4%
ReloadSwiss RS 14<<locked>>80%23,090 psi47%1946 fps100%
SNPE Vectan BA6 1/2<<locked>>80%40,973 psi83%2890 fps100%
SNPE Vectan SP 3<<locked>>82%34,650 psi70%2992 fps95.1%
SNPE Vectan Tubal 5000<<locked>>98%38,421 psi78%3015 fps95.5%
Somchem S335<<locked>>92%38,319 psi78%3025 fps95.3%
Vihtavuori N120<<locked>>80%38,232 psi78%3035 fps100%
Vihtavuori N130<<locked>>80%30,618 psi62%2831 fps95.6%
Vihtavuori N133<<locked>>86%32,387 psi66%2884 fps95.1%
Vihtavuori N135<<locked>>92%32,401 psi66%2972 fps95.6%
Vihtavuori N140<<locked>>96%39,218 psi80%3087 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 5.6 x 50 R Mag. loaded with the .224 | 50gr | Berger Target FB. IMR 3031 delivers the highest muzzle velocity at 3,291 fps; across all powders the maximum-charge window runs from 2,123 fps to 3,291 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 64–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Accurate 2015 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 50gr | Berger Target FB they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data