Load data for 5.6 x 50 R Mag. + .224 | 50gr | Barnes X S

5.6 x 50 R Mag. cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:11.0

Load data in caliber 5.6 x 50 R Mag. with .224 | 50gr | Barnes X S bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Accurate 2015 and Accurate 2495.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>92%43,714 psi89%3159 fps98.4%
Accurate 2495<<locked>>98%42,119 psi85%3186 fps98.5%
Accurate 4064ᴾ<<locked>>100%41,945 psi85%3196 fps96%
Accurate LT-30<<locked>>84%43,207 psi88%3068 fps96.9%
ADI AR 2207<<locked>>82%43,120 psi87%3153 fps100%
ADI AR 2219<<locked>>86%44,150 psi90%3219 fps96.9%
Alliant AR-Comp<<locked>>94%42,902 psi87%3245 fps99.9%
Alliant Reloder-10x<<locked>>88%44,034 psi89%3199 fps99.2%
Baschieri & Pellagri 106<<locked>>86%44,614 psi90%3097 fps97.6%
Hodgdon H322<<locked>>90%42,264 psi86%3176 fps96.4%
Hodgdon H4198<<locked>>82%42,003 psi85%3061 fps95.9%
Hodgdon TrailBossᴾ<<locked>>100%32,880 psi67%2123 fps100%
IMR 3031ᴾ<<locked>>100%44,440 psi90%3287 fps97.9%
IMR 4198<<locked>>86%42,627 psi86%3136 fps99.5%
Norma 200<<locked>>82%42,018 psi85%3130 fps99.3%
Norma 202<<locked>>96%44,150 psi90%3205 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%32,938 psi67%2172 fps100%
SNPE Vectan SP 10<<locked>>86%44,585 psi90%3212 fps95.9%
SNPE Vectan SP 3<<locked>>88%44,425 psi90%3196 fps97.8%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%43,366 psi88%3100 fps96.8%
Somchem S335<<locked>>94%43,613 psi88%3117 fps96.7%
Vihtavuori N120<<locked>>84%43,207 psi88%3104 fps100%
Vihtavuori N130<<locked>>90%43,642 psi89%3123 fps99%
Vihtavuori N133<<locked>>96%43,134 psi87%3120 fps98.2%
Vihtavuori N135<<locked>>98%41,858 psi85%3176 fps98.3%
Vihtavuori N140<<locked>>98%43,859 psi89%3169 fps96.3%
Vihtavuori N540<<locked>>98%43,613 psi88%3189 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 201522 gr82%32,416 psi66%2887 fps95.1%
Accurate 249524.2 gr88%30,937 psi63%2910 fps95%
Accurate 4064<<locked>>98%39,146 psi79%3130 fps95.1%
Accurate LT-30<<locked>>80%38,769 psi79%2966 fps95.6%
ADI AR 2207<<locked>>80%40,727 psi83%3107 fps100%
ADI AR 2219<<locked>>82%38,696 psi78%3091 fps95.3%
Alliant AR-Comp21.8 gr80%28,195 psi57%2838 fps95.9%
Alliant Reloder-10x<<locked>>80%34,751 psi70%2982 fps97.2%
Baschieri & Pellagri 106<<locked>>80%37,115 psi75%2930 fps95.6%
Hodgdon H322<<locked>>88%39,523 psi80%3110 fps95.6%
Hodgdon H4198<<locked>>80%39,740 psi81%3009 fps95.2%
Hodgdon TrailBoss<<locked>>80%24,424 psi50%1906 fps100%
IMR 3031<<locked>>92%35,201 psi71%3058 fps95%
IMR 4198<<locked>>80%35,998 psi73%2979 fps98.3%
Norma 200<<locked>>80%39,798 psi81%3081 fps99%
Norma 202<<locked>>94%41,742 psi85%3153 fps95.3%
ReloadSwiss RS 14<<locked>>80%24,207 psi49%1946 fps100%
SNPE Vectan SP 10<<locked>>84%41,858 psi85%3150 fps95.1%
SNPE Vectan SP 3<<locked>>80%35,027 psi71%2972 fps95%
SNPE Vectan Tubal 5000<<locked>>96%38,377 psi78%2989 fps95.3%
Somchem S335<<locked>>90%38,769 psi79%3009 fps95.3%
Vihtavuori N120<<locked>>80%38,145 psi77%3002 fps100%
Vihtavuori N130<<locked>>80%32,750 psi66%2861 fps96.2%
Vihtavuori N133<<locked>>88%34,200 psi69%2910 fps95.6%
Vihtavuori N135<<locked>>90%33,127 psi67%2963 fps95.6%
Vihtavuori N140<<locked>>96%41,495 psi84%3120 fps95.6%
Vihtavuori N540<<locked>>96%41,321 psi84%3136 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 5.6 x 50 R Mag. loaded with the .224 | 50gr | Barnes X S. IMR 3031 delivers the highest muzzle velocity at 3,287 fps; across all powders the maximum-charge window runs from 2,123 fps to 3,287 fps. Accurate 4064 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Accurate 4064, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Accurate 2015, Accurate 2495 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 50gr | Barnes X S they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data