
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .224 | 45gr | Rhino Solid Shank bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Alliant Reloder-10x and SNPE Vectan SP 3.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 44,222 psi | 90% | 3258 fps | 98.8% |
| Accurate 2015 | <<locked>> | 96% | 44,150 psi | 90% | 3333 fps | 98% |
| Accurate 2495ᴾ | <<locked>> | 100% | 38,725 psi | 79% | 3271 fps | 97.1% |
| Accurate LT-30 | <<locked>> | 86% | 42,424 psi | 86% | 3209 fps | 96% |
| ADI AR 2207 | <<locked>> | 86% | 43,816 psi | 89% | 3346 fps | 100% |
| Alliant AR-Comp | <<locked>> | 98% | 43,671 psi | 89% | 3425 fps | 99.7% |
| Alliant Reloder-10x | <<locked>> | 92% | 44,585 psi | 90% | 3383 fps | 98.9% |
| Alliant Reloder-7 | <<locked>> | 84% | 43,076 psi | 87% | 3287 fps | 98.9% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 43,424 psi | 88% | 3228 fps | 96.8% |
| Hodgdon H322 | <<locked>> | 92% | 43,947 psi | 89% | 3373 fps | 96.2% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,488 psi | 64% | 2238 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 44,092 psi | 89% | 3438 fps | 97.2% |
| IMR 4198 | <<locked>> | 90% | 43,395 psi | 88% | 3323 fps | 99.3% |
| Norma 200 | <<locked>> | 86% | 41,727 psi | 85% | 3301 fps | 98.9% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,299 psi | 63% | 2290 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 44,063 psi | 89% | 3100 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 90% | 42,540 psi | 86% | 3320 fps | 96.7% |
| Somchem S335 | <<locked>> | 98% | 44,440 psi | 90% | 3291 fps | 96.2% |
| Vihtavuori N120 | <<locked>> | 86% | 43,932 psi | 89% | 3301 fps | 100% |
| Vihtavuori N130 | <<locked>> | 92% | 42,946 psi | 87% | 3271 fps | 98.4% |
| Vihtavuori N133 | <<locked>> | 96% | 42,221 psi | 86% | 3251 fps | 97.4% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 39,798 psi | 81% | 3291 fps | 97.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 41,394 psi | 84% | 3196 fps | 98.2% |
| Accurate 2015 | <<locked>> | 88% | 34,171 psi | 69% | 3097 fps | 95% |
| Accurate 2495 | <<locked>> | 96% | 33,315 psi | 68% | 3136 fps | 95.3% |
| Accurate LT-30 | <<locked>> | 84% | 39,711 psi | 81% | 3146 fps | 95.1% |
| ADI AR 2207 | <<locked>> | 80% | 36,230 psi | 73% | 3176 fps | 99.6% |
| Alliant AR-Comp | 24.4 gr | 86% | 29,486 psi | 60% | 3038 fps | 95.7% |
| Alliant Reloder-10x | 22.7 gr | 82% | 32,518 psi | 66% | 3084 fps | 95.6% |
| Alliant Reloder-7 | <<locked>> | 80% | 38,014 psi | 77% | 3169 fps | 97.9% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 38,290 psi | 78% | 3110 fps | 95.2% |
| Hodgdon H322 | <<locked>> | 90% | 40,973 psi | 83% | 3304 fps | 95.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,974 psi | 47% | 2011 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 38,827 psi | 79% | 3314 fps | 95.6% |
| IMR 4198 | <<locked>> | 80% | 32,242 psi | 65% | 3035 fps | 96.4% |
| Norma 200 | <<locked>> | 80% | 34,316 psi | 70% | 3117 fps | 97.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,582 psi | 46% | 2051 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 39,247 psi | 80% | 3009 fps | 100% |
| SNPE Vectan SP 3 | 23.8 gr | 86% | 37,376 psi | 76% | 3199 fps | 95.1% |
| Somchem S335 | <<locked>> | 96% | 41,611 psi | 84% | 3228 fps | 95.4% |
| Vihtavuori N120 | <<locked>> | 80% | 36,405 psi | 74% | 3140 fps | 100% |
| Vihtavuori N130 | <<locked>> | 84% | 33,460 psi | 68% | 3041 fps | 95.7% |
| Vihtavuori N133 | <<locked>> | 90% | 34,824 psi | 71% | 3074 fps | 95% |
| Vihtavuori N135 | <<locked>> | 96% | 34,954 psi | 71% | 3166 fps | 95.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for 5.6 x 50 R Mag. loaded with the .224 | 45gr | Rhino Solid Shank. IMR 3031 delivers the highest muzzle velocity at 3,438 fps; across all powders the maximum-charge window runs from 2,238 fps to 3,438 fps. Accurate 2495 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 63–90 %, leaving at least 10 % headroom. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Alliant Reloder-10x, SNPE Vectan SP 3 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 45gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.