
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .224 | 45gr | Barnes XLC BT bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Alliant Reloder-10x and IMR 4198.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 94% | 44,005 psi | 89% | 3297 fps | 97.7% |
| Accurate 2495ᴾ | <<locked>> | 100% | 41,771 psi | 85% | 3310 fps | 97.6% |
| Accurate LT-30 | <<locked>> | 86% | 43,656 psi | 89% | 3205 fps | 96% |
| ADI AR 2207 | <<locked>> | 84% | 43,439 psi | 88% | 3310 fps | 100% |
| ADI AR 2219 | <<locked>> | 88% | 44,121 psi | 89% | 3350 fps | 95.9% |
| Alliant AR-Comp | <<locked>> | 96% | 42,627 psi | 86% | 3376 fps | 99.5% |
| Alliant Reloder-10x | <<locked>> | 90% | 44,034 psi | 89% | 3340 fps | 98.6% |
| Alliant Reloder-7 | <<locked>> | 82% | 42,453 psi | 86% | 3241 fps | 98.6% |
| Baschieri & Pellagri 106 | <<locked>> | 86% | 42,409 psi | 86% | 3179 fps | 96.2% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,140 psi | 65% | 2224 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 41,698 psi | 85% | 3353 fps | 96.2% |
| IMR 4198 | <<locked>> | 88% | 42,583 psi | 86% | 3274 fps | 99% |
| Norma 200 | <<locked>> | 84% | 42,482 psi | 86% | 3281 fps | 98.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 32,126 psi | 65% | 2277 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 82% | 43,410 psi | 88% | 3058 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 90% | 44,483 psi | 90% | 3333 fps | 96.9% |
| Somchem S335 | <<locked>> | 96% | 43,874 psi | 89% | 3248 fps | 95.7% |
| Vihtavuori N120 | <<locked>> | 86% | 42,975 psi | 87% | 3248 fps | 100% |
| Vihtavuori N130 | <<locked>> | 92% | 44,179 psi | 90% | 3271 fps | 98.4% |
| Vihtavuori N133 | <<locked>> | 98% | 43,105 psi | 87% | 3248 fps | 97.3% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 41,872 psi | 85% | 3307 fps | 97.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 88% | 36,463 psi | 74% | 3123 fps | 95.5% |
| Accurate 2495 | <<locked>> | 94% | 34,809 psi | 71% | 3143 fps | 95.5% |
| Accurate LT-30 | <<locked>> | 84% | 41,379 psi | 84% | 3156 fps | 95.3% |
| ADI AR 2207 | <<locked>> | 80% | 38,290 psi | 78% | 3196 fps | 99.7% |
| ADI AR 2219 | <<locked>> | 86% | 41,785 psi | 85% | 3294 fps | 95.2% |
| Alliant AR-Comp | 23.2 gr | 84% | 29,747 psi | 60% | 3009 fps | 95.4% |
| Alliant Reloder-10x | 21.5 gr | 80% | 32,590 psi | 66% | 3051 fps | 95.3% |
| Alliant Reloder-7 | <<locked>> | 80% | 40,263 psi | 82% | 3192 fps | 98.2% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 39,827 psi | 81% | 3117 fps | 95.4% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,946 psi | 49% | 2005 fps | 100% |
| IMR 3031 | <<locked>> | 98% | 39,479 psi | 80% | 3297 fps | 95.4% |
| IMR 4198 | 20.5 gr | 80% | 34,171 psi | 69% | 3058 fps | 96.9% |
| Norma 200 | <<locked>> | 80% | 37,347 psi | 76% | 3159 fps | 97.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,670 psi | 48% | 2044 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,089 psi | 83% | 3015 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 39,349 psi | 80% | 3215 fps | 95.4% |
| Somchem S335 | <<locked>> | 94% | 41,611 psi | 84% | 3199 fps | 95.1% |
| Vihtavuori N120 | <<locked>> | 80% | 36,318 psi | 74% | 3100 fps | 99.9% |
| Vihtavuori N130 | <<locked>> | 82% | 32,938 psi | 67% | 2995 fps | 95.2% |
| Vihtavuori N133 | <<locked>> | 92% | 36,216 psi | 73% | 3084 fps | 95.2% |
| Vihtavuori N135 | <<locked>> | 94% | 35,143 psi | 71% | 3140 fps | 95.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for 5.6 x 50 R Mag. loaded with the .224 | 45gr | Barnes XLC BT. Alliant AR-Comp delivers the highest muzzle velocity at 3,376 fps; across all powders the maximum-charge window runs from 2,224 fps to 3,376 fps. Accurate 2495 gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Alliant Reloder-10x, IMR 4198 rank at the top here: for 5.6 x 50 R Mag. with the .224 | 45gr | Barnes XLC BT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.