top of page

Load data for 5.6 x 50 R Mag. + .224 | 33gr | Speer TNT

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

5.6 x 50 R Mag. + .224 | 33gr | Speer TNT

Load Specifications

Bullet:
.224 | 33gr | Speer TNT
Manufacturer SKU:
1014
Bullet Weight:
33gr | 2.1g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.438" | 11.1mm
Caliber:
5.6 x 50 R Mag.
Case Length (l3):
1.968" | 50.0mm
Cartridge Length (C.O.L.):
2.284" | 58.0mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
49313 psi | 3400 bar
LID:
LID_B6050_C915

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 36 loads in caliber 5.6 x 50 R Mag. with .224 | 33gr | Speer TNT bullet and 18 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
91%
43149
87%
**57
99%
[ADI AR 2219]*
<<locked>>
93%
43004
87%
**11
92%
[Accurate 2015]*
<<locked>>
96%
38580
78%
**86
94%
[Alliant AR-Comp]*
<<locked>>
97%
34940
71%
**40
94%
Alliant Reloder-10x
<<locked>>
96%
43120
87%
**47
96%
Alliant Reloder-7
<<locked>>
89%
43439
88%
**91
97%
[Baschieri & Pellagri 106]*
<<locked>>
93%
43874
89%
**79
94%
[Hodgdon H4198]*
<<locked>>
91%
44077
89%
**35
92%
Hodgdon TrailBoss
<<locked>>
95%
27862
56%
**16
100%
IMR 4198
<<locked>>
95%
43221
88%
**11
97%
IMR 4227
<<locked>>
84%
43323
88%
**75
98%
Lovex S053
<<locked>>
85%
43410
88%
**81
100%
Norma 200
<<locked>>
92%
43250
88%
**27
97%
ReloadSwiss RS 14
<<locked>>
95%
27238
55%
**62
100%
ReloadSwiss RS 36
<<locked>>
85%
44150
90%
**17
98%
SNPE Vectan BA6 1/2
<<locked>>
88%
43511
88%
**24
100%
Vihtavuori N120 👍
<<locked>>
93%
43990
89%
**20
100%
Vihtavuori N130
<<locked>>
96%
40451
82%
**93
95%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
31125
63%
**28
96%
[ADI AR 2219]*
<<locked>>
90%
39001
79%
**96
90%
[Accurate 2015]*
<<locked>>
90%
31096
63%
**69
90%
[Alliant AR-Comp]*
<<locked>>
90%
28427
58%
**10
90%
[Alliant Reloder-10x]*
<<locked>>
86%
30153
61%
**79
91%
[Alliant Reloder-7]*
<<locked>>
81%
32996
67%
**99
93%
[Baschieri & Pellagri 106]*
<<locked>>
86%
34925
71%
**63
90%
[Hodgdon H4198]*
<<locked>>
88%
39711
81%
**33
90%
Hodgdon TrailBoss
<<locked>>
80%
21785
44%
**20
100%
[IMR 4198]*
<<locked>>
81%
28500
58%
**61
90%
IMR 4227
<<locked>>
81%
39059
79%
**73
97%
Lovex S053
<<locked>>
81%
37724
76%
**43
99%
[Norma 200]*
<<locked>>
81%
29370
60%
**40
91%
ReloadSwiss RS 14
<<locked>>
80%
21335
43%
**72
100%
ReloadSwiss RS 36
<<locked>>
81%
38232
78%
**73
97%
SNPE Vectan BA6 1/2
<<locked>>
81%
35114
71%
**50
100%
Vihtavuori N120
<<locked>>
81%
29472
60%
**30
97%
[Vihtavuori N130]*
<<locked>>
86%
29588
60%
**78
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page