top of page

Load data for 5.6 x 50 R Mag. + .224 | 30gr | Berger Varmint

Recommended Powder(s): ADI AR 2207, Lovex S053, Vihtavuori N120

5.6 x 50 R Mag. + .224 | 30gr | Berger Varmint

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 30gr | Berger Varmint
Manufacturer SKU:
22301
Bullet Weight:
30gr | 1.9g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.612" | 15.5mm
Caliber:
5.6 x 50 R Mag. load data
Case Length (l3):
1.968" | 50.0mm
Cartridge Length (C.O.L.):
2.365" | 60.1mm
Seated Depth:
0.215" | 5.5mm
Shank Seated Depth:
0.215" | 5.5mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
49313 psi | 3400 bar
LID:
LID_B882_C915
Last updated:
2025-01-01

Load data for 28 loads in caliber 5.6 x 50 R Mag. with .224 | 30gr | Berger Varmint bullet and 14 powders such as ADI AR 2207, Lovex S053, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
94%
44193
90%
**81
99%
[Alliant Reloder-10x]*
<<locked>>
96%
38667
78%
**30
93%
Alliant Reloder-7
<<locked>>
92%
43163
88%
**76
95%
[Baschieri & Pellagri 106]*
<<locked>>
95%
43323
88%
**52
92%
Hodgdon TrailBoss
<<locked>>
97%
27470
56%
**08
100%
IMR 4198
<<locked>>
96%
41365
84%
**57
95%
IMR 4227
<<locked>>
87%
43047
87%
**70
97%
Lovex S053 👍
<<locked>>
88%
43033
87%
**73
100%
Norma 200
<<locked>>
96%
44222
90%
**55
96%
ReloadSwiss RS 14
<<locked>>
96%
26789
54%
**61
100%
ReloadSwiss RS 36
<<locked>>
87%
43598
88%
**09
97%
SNPE Vectan BA6 1/2
<<locked>>
92%
43830
89%
**52
100%
Vihtavuori N120 👍
<<locked>>
96%
43062
87%
**16
99%
[Vihtavuori N130]*
<<locked>>
97%
37347
76%
**06
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2207]*
<<locked>>
81%
28166
57%
**28
93%
[Alliant Reloder-10x]*
<<locked>>
91%
32169
65%
**30
90%
[Alliant Reloder-7]*
<<locked>>
82%
31241
63%
**38
90%
[Baschieri & Pellagri 106]*
<<locked>>
92%
39131
79%
**53
90%
Hodgdon TrailBoss
<<locked>>
81%
21350
43%
**08
100%
[IMR 4198]*
<<locked>>
87%
31256
63%
**48
90%
IMR 4227
<<locked>>
81%
35969
73%
**79
95%
Lovex S053
<<locked>>
81%
34519
70%
**56
98%
[Norma 200]*
<<locked>>
85%
30516
62%
**61
90%
ReloadSwiss RS 14
<<locked>>
81%
20813
42%
**54
100%
ReloadSwiss RS 36
<<locked>>
81%
34983
71%
**89
95%
SNPE Vectan BA6 1/2
<<locked>>
81%
32764
66%
**15
100%
[Vihtavuori N120]*
<<locked>>
81%
26745
54%
**30
94%
[Vihtavuori N130]*
<<locked>>
93%
33489
68%
**91
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page