
Load Specifications
Load data in caliber 5.6 x 50 R Mag. with .223 | 45gr | Merlin Virtus bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan SP 3, Alliant Reloder-10x and Alliant AR-Comp.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 42,192 psi | 86% | 3212 fps | 98.2% |
| Accurate 2015 | <<locked>> | 98% | 44,280 psi | 90% | 3337 fps | 97.9% |
| Accurate LT-30 | <<locked>> | 88% | 42,859 psi | 87% | 3215 fps | 95.9% |
| ADI AR 2207 | <<locked>> | 88% | 44,425 psi | 90% | 3360 fps | 100% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 44,092 psi | 89% | 3432 fps | 99.7% |
| Alliant Reloder-10x | <<locked>> | 92% | 42,018 psi | 85% | 3327 fps | 98.3% |
| Alliant Reloder-7 | <<locked>> | 86% | 43,627 psi | 88% | 3301 fps | 98.9% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 44,512 psi | 90% | 3245 fps | 96.8% |
| Hodgdon H322 | <<locked>> | 96% | 43,395 psi | 88% | 3356 fps | 95.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,574 psi | 62% | 2215 fps | 100% |
| IMR 4198 | <<locked>> | 92% | 44,266 psi | 90% | 3337 fps | 99.3% |
| Lovex S053 | <<locked>> | 82% | 43,134 psi | 87% | 3238 fps | 100% |
| Norma 200 | <<locked>> | 88% | 41,872 psi | 85% | 3307 fps | 98.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,284 psi | 61% | 2264 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 44,063 psi | 89% | 3307 fps | 99.8% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 42,148 psi | 85% | 3064 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 43,279 psi | 88% | 3337 fps | 96.8% |
| Vihtavuori N120 | <<locked>> | 90% | 44,164 psi | 90% | 3301 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 42,119 psi | 85% | 3255 fps | 98.1% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 41,756 psi | 85% | 3248 fps | 97.1% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 37,115 psi | 75% | 3222 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 39,320 psi | 80% | 3146 fps | 97.6% |
| Accurate 2015 | <<locked>> | 92% | 36,405 psi | 74% | 3156 fps | 95.7% |
| Accurate LT-30 | <<locked>> | 86% | 40,451 psi | 82% | 3159 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 34,214 psi | 69% | 3127 fps | 99.2% |
| Alliant AR-Comp | 24.3 gr | 88% | 29,225 psi | 59% | 3028 fps | 95.3% |
| Alliant Reloder-10x | 22.7 gr | 84% | 32,503 psi | 66% | 3084 fps | 95.4% |
| Alliant Reloder-7 | <<locked>> | 80% | 35,636 psi | 72% | 3110 fps | 97.1% |
| Baschieri & Pellagri 106 | <<locked>> | 86% | 38,972 psi | 79% | 3123 fps | 95.2% |
| Hodgdon H322 | <<locked>> | 94% | 40,843 psi | 83% | 3297 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,336 psi | 45% | 1991 fps | 100% |
| IMR 4198 | <<locked>> | 80% | 30,589 psi | 62% | 2986 fps | 95.5% |
| Lovex S053 | <<locked>> | 80% | 40,640 psi | 82% | 3189 fps | 100% |
| Norma 200 | <<locked>> | 80% | 32,039 psi | 65% | 3058 fps | 96.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,234 psi | 45% | 2044 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 41,524 psi | 84% | 3255 fps | 99.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 37,811 psi | 77% | 2982 fps | 100% |
| SNPE Vectan SP 3 | 23.8 gr | 88% | 37,913 psi | 77% | 3209 fps | 95.1% |
| Vihtavuori N120 | <<locked>> | 80% | 32,010 psi | 65% | 3025 fps | 99.5% |
| Vihtavuori N130 | <<locked>> | 86% | 32,793 psi | 67% | 3025 fps | 95.3% |
| Vihtavuori N133 | <<locked>> | 96% | 36,637 psi | 74% | 3127 fps | 95.6% |
| Vihtavuori N135 | <<locked>> | 98% | 34,896 psi | 71% | 3163 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for 5.6 x 50 R Mag. loaded with the .223 | 45gr | Merlin Virtus. Alliant AR-Comp delivers the highest muzzle velocity at 3,432 fps; across all powders the maximum-charge window runs from 2,215 fps to 3,432 fps. Alliant AR-Comp gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (340 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.223" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Alliant AR-Comp, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan SP 3, Alliant Reloder-10x, Alliant AR-Comp rank at the top here: for 5.6 x 50 R Mag. with the .223 | 45gr | Merlin Virtus they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.