Load data for 5.6 x 50 Mag. + .224 | 55gr | Nosler Ballistic Tip Varmint

5.6 x 50 Mag. cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:55 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:10.5

Load data in caliber 5.6 x 50 Mag. with .224 | 55gr | Nosler Ballistic Tip Varmint bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Accurate 2520 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%47,384 psi86%3051 fps99.8%
Accurate 2015<<locked>>96%48,051 psi87%3140 fps99.6%
Accurate 2460<<locked>>92%47,268 psi86%3136 fps97.4%
Accurate 2495ᴾ<<locked>>100%43,018 psi78%3107 fps99.3%
Accurate 2520<<locked>>96%47,195 psi86%3173 fps97%
Accurate 4064ᴾ<<locked>>100%39,914 psi72%3058 fps96.5%
Accurate LT-30<<locked>>88%48,428 psi88%3068 fps98.7%
Accurate LT-32<<locked>>88%48,849 psi89%3074 fps97.1%
ADI AR 2207<<locked>>86%48,153 psi87%3133 fps100%
ADI AR 2219<<locked>>88%46,485 psi84%3163 fps98.3%
Alliant AR-Comp<<locked>>98%47,964 psi87%3232 fps100%
Alliant Reloder-10x<<locked>>92%49,095 psi89%3189 fps100%
Alliant Reloder-7<<locked>>84%46,586 psi85%3081 fps99.9%
Baschieri & Pellagri 106<<locked>>88%46,876 psi85%3041 fps98.8%
Hodgdon BL-C2<<locked>>98%48,298 psi88%3209 fps96%
Hodgdon H322<<locked>>92%48,225 psi88%3196 fps98.6%
Hodgdon H335<<locked>>92%49,124 psi89%3202 fps98%
Hodgdon H4198<<locked>>84%47,021 psi85%3064 fps98%
Hodgdon TrailBossᴾ<<locked>>100%31,981 psi58%2018 fps100%
IMR 3031ᴾ<<locked>>100%48,588 psi88%3264 fps99.3%
IMR 4198<<locked>>90%47,427 psi86%3120 fps100%
Lovex D073.4<<locked>>86%47,224 psi86%3150 fps96.6%
Lovex D073.5<<locked>>92%47,529 psi86%3136 fps96.1%
Lovex D073.6ᴾ<<locked>>100%48,559 psi88%3209 fps97.3%
Lovex S053<<locked>>82%48,965 psi89%3048 fps100%
Norma 200<<locked>>88%49,226 psi89%3166 fps100%
Norma 202ᴾ<<locked>>100%49,676 psi90%3212 fps98.1%
ReloadSwiss RS 14ᴾ<<locked>>100%31,981 psi58%2064 fps100%
ReloadSwiss RS 40<<locked>>92%47,848 psi87%3153 fps96.6%
Rottweil R 901<<locked>>96%47,688 psi87%3146 fps97.4%
Shooters World AR Plus<<locked>>86%47,224 psi86%3150 fps96.6%
Shooters World Match Rifleᴾ<<locked>>100%48,559 psi88%3209 fps97.3%
SNPE Vectan BA6 1/2<<locked>>84%47,123 psi86%2854 fps100%
SNPE Vectan SP 10<<locked>>88%47,326 psi86%3163 fps97.5%
SNPE Vectan SP 3<<locked>>92%49,705 psi90%3189 fps99.3%
SNPE Vectan Tubal 3000<<locked>>96%46,978 psi85%3064 fps97.4%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%42,424 psi77%2986 fps97.5%
Somchem S335<<locked>>98%48,414 psi88%3110 fps98.5%
Vihtavuori N120<<locked>>86%48,240 psi88%3081 fps100%
Vihtavuori N130<<locked>>94%49,371 psi90%3123 fps99.9%
Vihtavuori N133<<locked>>98%48,994 psi89%3120 fps99.6%
Vihtavuori N135ᴾ<<locked>>100%43,932 psi80%3117 fps99.3%
Vihtavuori N140ᴾ<<locked>>100%46,746 psi85%3127 fps97.9%
Vihtavuori N540ᴾ<<locked>>100%45,339 psi82%3107 fps97.1%
Winchester 748<<locked>>98%49,400 psi90%3235 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%44,222 psi80%2992 fps99.6%
Accurate 2015<<locked>>82%30,705 psi56%2756 fps95.5%
Accurate 2460<<locked>>88%40,973 psi74%3012 fps95.8%
Accurate 2495<<locked>>88%28,601 psi52%2762 fps95.2%
Accurate 252026.9 gr92%41,220 psi75%3054 fps95.4%
Accurate 4064<<locked>>98%37,550 psi68%3005 fps95.7%
Accurate LT-30<<locked>>80%37,942 psi69%2854 fps96.4%
Accurate LT-32<<locked>>82%40,625 psi74%2910 fps95%
ADI AR 2207<<locked>>80%39,624 psi72%2976 fps100%
ADI AR 2219<<locked>>80%35,230 psi64%2910 fps95.2%
Alliant AR-Comp<<locked>>80%26,397 psi48%2700 fps96.2%
Alliant Reloder-10x20.9 gr80%33,272 psi60%2851 fps97.6%
Alliant Reloder-7<<locked>>80%40,901 psi74%2969 fps99.5%
Baschieri & Pellagri 106<<locked>>80%36,347 psi66%2825 fps96.4%
Hodgdon BL-C2<<locked>>96%44,962 psi82%3146 fps95.1%
Hodgdon H32223.3 gr84%37,014 psi67%2956 fps95.9%
Hodgdon H335<<locked>>86%40,248 psi73%3025 fps95.8%
Hodgdon H4198<<locked>>80%41,829 psi76%2959 fps96.8%
Hodgdon TrailBoss<<locked>>80%23,786 psi43%1814 fps100%
IMR 3031<<locked>>88%32,982 psi60%2910 fps95.3%
IMR 4198<<locked>>80%35,070 psi64%2858 fps98.8%
Lovex D073.4<<locked>>82%41,263 psi75%3031 fps95%
Lovex D073.5<<locked>>90%44,193 psi80%3074 fps95.2%
Lovex D073.6<<locked>>96%41,872 psi76%3081 fps95.6%
Lovex S053<<locked>>80%46,122 psi84%3002 fps100%
Norma 200<<locked>>80%37,884 psi69%2946 fps99.2%
Norma 202<<locked>>92%38,232 psi69%2979 fps95.3%
ReloadSwiss RS 14<<locked>>80%23,496 psi43%1854 fps100%
ReloadSwiss RS 40<<locked>>88%42,076 psi76%3038 fps95.1%
Rottweil R 901<<locked>>90%39,697 psi72%2979 fps95.3%
Shooters World AR Plus<<locked>>82%41,263 psi75%3031 fps95%
Shooters World Match Rifle<<locked>>96%41,872 psi76%3081 fps95.6%
SNPE Vectan BA6 1/2<<locked>>80%42,366 psi77%2779 fps100%
SNPE Vectan SP 10<<locked>>82%38,406 psi70%2976 fps95.1%
SNPE Vectan SP 3<<locked>>80%33,982 psi62%2854 fps95.8%
SNPE Vectan Tubal 3000<<locked>>90%38,711 psi70%2894 fps95.2%
SNPE Vectan Tubal 5000<<locked>>94%35,085 psi64%2825 fps95.3%
Somchem S335<<locked>>88%35,520 psi64%2841 fps95.3%
Vihtavuori N120<<locked>>80%39,726 psi72%2933 fps100%
Vihtavuori N130<<locked>>80%32,198 psi58%2759 fps97%
Vihtavuori N133<<locked>>84%31,546 psi57%2746 fps95.7%
Vihtavuori N135<<locked>>88%29,979 psi54%2789 fps95.5%
Vihtavuori N140<<locked>>94%38,696 psi70%2959 fps95.8%
Vihtavuori N540<<locked>>96%39,856 psi72%2995 fps95.6%
Winchester 748<<locked>>96%45,977 psi83%3169 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for 5.6 x 50 Mag. loaded with the .224 | 55gr | Nosler Ballistic Tip Varmint. IMR 3031 delivers the highest muzzle velocity at 3,264 fps; across all powders the maximum-charge window runs from 2,018 fps to 3,264 fps. Accurate 2495 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Accurate 2520, Alliant Reloder-10x rank at the top here: for 5.6 x 50 Mag. with the .224 | 55gr | Nosler Ballistic Tip Varmint they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data