Load data for 5.6 x 50 Mag. + .224 | 52gr | Speer Varmint Hollow Point

5.6 x 50 Mag. cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:52 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:12.0

Load data in caliber 5.6 x 50 Mag. with .224 | 52gr | Speer Varmint Hollow Point bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Accurate 2520 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%47,007 psi85%3123 fps99.7%
Accurate 2015<<locked>>96%47,848 psi87%3219 fps99.4%
Accurate 2460<<locked>>92%46,847 psi85%3209 fps96.9%
Accurate 2495ᴾ<<locked>>100%42,583 psi77%3176 fps99%
Accurate 2520<<locked>>96%47,152 psi86%3248 fps96.6%
Accurate 4064ᴾ<<locked>>100%39,508 psi72%3120 fps95.9%
Accurate LT-30<<locked>>88%48,037 psi87%3143 fps98.4%
Accurate LT-32<<locked>>88%48,457 psi88%3150 fps96.7%
ADI AR 2207<<locked>>86%47,340 psi86%3205 fps100%
ADI AR 2219<<locked>>90%49,110 psi89%3294 fps98.5%
Alliant AR-Comp<<locked>>98%47,543 psi86%3310 fps100%
Alliant Reloder-10x<<locked>>92%48,472 psi88%3261 fps99.9%
Alliant Reloder-7<<locked>>86%49,023 psi89%3209 fps100%
Baschieri & Pellagri 106<<locked>>90%49,676 psi90%3169 fps99%
Hodgdon H322<<locked>>92%47,427 psi86%3261 fps98.2%
Hodgdon H335<<locked>>92%49,226 psi89%3284 fps97.7%
Hodgdon H4198<<locked>>86%49,530 psi90%3196 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%31,995 psi58%2087 fps100%
IMR 3031ᴾ<<locked>>100%48,138 psi87%3337 fps99.1%
IMR 4198<<locked>>92%49,342 psi90%3238 fps100%
IMR 4227<<locked>>82%49,385 psi90%3176 fps100%
Lovex D073.4<<locked>>86%46,978 psi85%3225 fps96.2%
Lovex D073.6ᴾ<<locked>>100%47,834 psi87%3274 fps96.8%
Lovex S053<<locked>>82%48,457 psi88%3130 fps100%
Norma 200<<locked>>88%48,646 psi88%3241 fps100%
Norma 202ᴾ<<locked>>100%49,182 psi89%3281 fps97.8%
ReloadSwiss RS 14ᴾ<<locked>>100%31,908 psi58%2133 fps100%
ReloadSwiss RS 36<<locked>>82%49,748 psi90%3212 fps100%
ReloadSwiss RS 40<<locked>>92%47,601 psi86%3228 fps96.2%
Rottweil R 901<<locked>>96%46,963 psi85%3212 fps97%
Shooters World AR Plus<<locked>>86%46,978 psi85%3225 fps96.2%
Shooters World Match Rifleᴾ<<locked>>100%47,834 psi87%3274 fps96.8%
SNPE Vectan BA6 1/2<<locked>>86%49,081 psi89%2972 fps100%
SNPE Vectan SP 10<<locked>>90%49,705 psi90%3291 fps97.7%
SNPE Vectan SP 3<<locked>>92%49,066 psi89%3264 fps99.1%
SNPE Vectan Tubal 3000<<locked>>98%49,066 psi89%3182 fps97.5%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%42,177 psi77%3054 fps97.1%
Somchem S335<<locked>>98%48,037 psi87%3182 fps98.2%
Vihtavuori N120<<locked>>86%47,398 psi86%3153 fps100%
Vihtavuori N130<<locked>>94%49,327 psi90%3205 fps99.8%
Vihtavuori N133<<locked>>98%48,254 psi88%3186 fps99.4%
Vihtavuori N135ᴾ<<locked>>100%43,540 psi79%3189 fps99%
Vihtavuori N140ᴾ<<locked>>100%46,253 psi84%3192 fps97.5%
Vihtavuori N540ᴾ<<locked>>100%45,281 psi82%3182 fps96.8%
Winchester 748<<locked>>98%49,313 psi89%3314 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%43,859 psi80%3064 fps99.4%
Accurate 2015<<locked>>82%30,516 psi55%2822 fps95%
Accurate 2460<<locked>>88%40,741 psi74%3084 fps95.3%
Accurate 2495<<locked>>90%29,936 psi54%2871 fps95.3%
Accurate 252028.3 gr94%43,888 psi80%3186 fps95.8%
Accurate 4064<<locked>>98%37,202 psi68%3068 fps95.2%
Accurate LT-30<<locked>>80%37,449 psi68%2917 fps95.9%
Accurate LT-32<<locked>>84%42,815 psi78%3035 fps95.3%
ADI AR 2207<<locked>>80%39,073 psi71%3048 fps100%
ADI AR 2219<<locked>>82%37,521 psi68%3045 fps95.6%
Alliant AR-Comp<<locked>>80%26,281 psi48%2766 fps95.6%
Alliant Reloder-10x21.5 gr80%32,793 psi60%2910 fps97.1%
Alliant Reloder-7<<locked>>80%40,828 psi74%3048 fps99.3%
Baschieri & Pellagri 106<<locked>>80%35,998 psi65%2887 fps95.9%
Hodgdon H32223.9 gr84%36,230 psi66%3012 fps95.2%
Hodgdon H335<<locked>>86%39,610 psi72%3084 fps95.2%
Hodgdon H4198<<locked>>80%41,220 psi75%3025 fps96.3%
Hodgdon TrailBoss<<locked>>80%23,569 psi43%1873 fps100%
IMR 3031<<locked>>90%34,548 psi63%3028 fps95.5%
IMR 4198<<locked>>80%34,766 psi63%2927 fps98.5%
IMR 4227<<locked>>80%46,543 psi84%3127 fps100%
Lovex D073.4<<locked>>84%43,758 psi79%3159 fps95.3%
Lovex D073.6<<locked>>96%41,321 psi75%3143 fps95%
Lovex S053<<locked>>80%45,716 psi83%3081 fps100%
Norma 200<<locked>>80%37,289 psi68%3009 fps98.9%
Norma 202<<locked>>94%40,335 psi73%3104 fps95.5%
ReloadSwiss RS 14<<locked>>80%23,250 psi42%1913 fps100%
ReloadSwiss RS 36<<locked>>80%46,470 psi84%3156 fps100%
ReloadSwiss RS 40<<locked>>90%44,425 psi81%3166 fps95.4%
Rottweil R 901<<locked>>92%41,495 psi75%3094 fps95.5%
Shooters World AR Plus<<locked>>84%43,758 psi79%3159 fps95.3%
Shooters World Match Rifle<<locked>>96%41,321 psi75%3143 fps95%
SNPE Vectan BA6 1/2<<locked>>80%41,771 psi76%2854 fps100%
SNPE Vectan SP 10<<locked>>84%40,538 psi74%3104 fps95.4%
SNPE Vectan SP 3<<locked>>80%33,460 psi61%2917 fps95.1%
SNPE Vectan Tubal 3000<<locked>>92%40,654 psi74%3015 fps95.4%
SNPE Vectan Tubal 5000<<locked>>96%37,101 psi67%2943 fps95.6%
Somchem S335<<locked>>90%37,159 psi67%2953 fps95.4%
Vihtavuori N120<<locked>>80%39,218 psi71%3005 fps100%
Vihtavuori N130<<locked>>80%31,778 psi58%2822 fps96.5%
Vihtavuori N133<<locked>>84%31,401 psi57%2815 fps95.2%
Vihtavuori N135<<locked>>90%31,473 psi57%2900 fps95.7%
Vihtavuori N140<<locked>>94%38,058 psi69%3018 fps95.2%
Vihtavuori N540<<locked>>96%39,494 psi72%3058 fps95.1%
Winchester 748<<locked>>96%46,021 psi84%3248 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for 5.6 x 50 Mag. loaded with the .224 | 52gr | Speer Varmint Hollow Point. IMR 3031 delivers the highest muzzle velocity at 3,337 fps; across all powders the maximum-charge window runs from 2,087 fps to 3,337 fps. Accurate 2495 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 52.0 gr projectile in 0.224" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Accurate 2520, Alliant Reloder-10x rank at the top here: for 5.6 x 50 Mag. with the .224 | 52gr | Speer Varmint Hollow Point they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data