Load data for 5.6 x 50 Mag. + .224 | 52gr | Nosler Custom Competition

5.6 x 50 Mag. cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:52 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:12.0

Load data in caliber 5.6 x 50 Mag. with .224 | 52gr | Nosler Custom Competition bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Accurate 2520 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%47,224 psi86%3130 fps99.7%
Accurate 2015<<locked>>96%48,153 psi87%3222 fps99.4%
Accurate 2460<<locked>>92%47,123 psi86%3215 fps97%
Accurate 2495ᴾ<<locked>>100%42,786 psi78%3182 fps99%
Accurate 2520<<locked>>96%47,398 psi86%3255 fps96.7%
Accurate 4064ᴾ<<locked>>100%39,697 psi72%3127 fps96%
Accurate LT-30<<locked>>88%48,298 psi88%3150 fps98.5%
Accurate LT-32<<locked>>88%48,762 psi88%3156 fps96.8%
ADI AR 2207<<locked>>86%47,630 psi86%3212 fps100%
ADI AR 2219<<locked>>90%49,400 psi90%3301 fps98.6%
Alliant AR-Comp<<locked>>98%47,268 psi86%3304 fps100%
Alliant Reloder-10x<<locked>>92%48,776 psi89%3268 fps99.9%
Alliant Reloder-7<<locked>>86%49,284 psi89%3215 fps100%
Baschieri & Pellagri 106<<locked>>88%46,760 psi85%3120 fps98.6%
Hodgdon H322<<locked>>92%47,718 psi87%3268 fps98.3%
Hodgdon H335<<locked>>92%48,892 psi89%3278 fps97.7%
Hodgdon H4198<<locked>>86%49,777 psi90%3202 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%31,865 psi58%2083 fps100%
IMR 3031ᴾ<<locked>>100%48,327 psi88%3343 fps99.1%
IMR 4198<<locked>>92%49,647 psi90%3245 fps100%
IMR 4227<<locked>>82%49,734 psi90%3186 fps100%
Lovex D073.4<<locked>>86%47,239 psi86%3232 fps96.3%
Lovex D073.6ᴾ<<locked>>100%48,095 psi87%3278 fps96.9%
Lovex S053<<locked>>82%48,762 psi88%3133 fps100%
Norma 200<<locked>>88%48,399 psi88%3238 fps100%
Norma 202ᴾ<<locked>>100%49,443 psi90%3287 fps97.8%
ReloadSwiss RS 14ᴾ<<locked>>100%31,792 psi58%2133 fps100%
ReloadSwiss RS 36<<locked>>82%49,501 psi90%3212 fps100%
ReloadSwiss RS 40<<locked>>92%47,790 psi87%3235 fps96.3%
Rottweil R 901<<locked>>96%47,224 psi86%3215 fps97%
Shooters World AR Plus<<locked>>86%47,239 psi86%3232 fps96.3%
Shooters World Match Rifleᴾ<<locked>>100%48,095 psi87%3278 fps96.9%
SNPE Vectan BA6 1/2<<locked>>86%49,443 psi90%2976 fps100%
SNPE Vectan SP 10<<locked>>88%46,702 psi85%3235 fps97.1%
SNPE Vectan SP 3<<locked>>92%49,356 psi90%3271 fps99.1%
SNPE Vectan Tubal 3000<<locked>>98%49,356 psi90%3186 fps97.6%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%42,424 psi77%3061 fps97.2%
Somchem S335<<locked>>98%47,747 psi87%3179 fps98.2%
Vihtavuori N120<<locked>>86%47,718 psi87%3163 fps100%
Vihtavuori N130<<locked>>94%48,979 psi89%3199 fps99.8%
Vihtavuori N133<<locked>>98%48,457 psi88%3192 fps99.4%
Vihtavuori N135ᴾ<<locked>>100%43,830 psi80%3196 fps99.1%
Vihtavuori N140ᴾ<<locked>>100%46,499 psi84%3199 fps97.6%
Vihtavuori N540ᴾ<<locked>>100%45,469 psi83%3189 fps96.8%
Winchester 748<<locked>>98%49,443 psi90%3317 fps96.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%44,135 psi80%3071 fps99.5%
Accurate 2015<<locked>>82%30,748 psi56%2828 fps95.1%
Accurate 2460<<locked>>88%40,988 psi74%3091 fps95.4%
Accurate 2495<<locked>>90%30,197 psi55%2877 fps95.5%
Accurate 252027.8 gr92%41,046 psi74%3127 fps95%
Accurate 4064<<locked>>98%36,927 psi67%3064 fps95.1%
Accurate LT-30<<locked>>80%37,652 psi68%2923 fps96%
Accurate LT-32<<locked>>84%43,076 psi78%3045 fps95.4%
ADI AR 2207<<locked>>80%39,392 psi71%3054 fps100%
ADI AR 2219<<locked>>82%37,333 psi68%3041 fps95.6%
Alliant AR-Comp<<locked>>80%26,484 psi48%2776 fps95.8%
Alliant Reloder-10x21.6 gr80%33,054 psi60%2920 fps97.2%
Alliant Reloder-7<<locked>>80%41,060 psi75%3054 fps99.4%
Baschieri & Pellagri 106<<locked>>80%35,781 psi65%2884 fps95.8%
Hodgdon H32224 gr84%36,434 psi66%3018 fps95.3%
Hodgdon H335<<locked>>86%39,813 psi72%3091 fps95.3%
Hodgdon H4198<<locked>>80%41,510 psi75%3031 fps96.4%
Hodgdon TrailBoss<<locked>>80%23,496 psi43%1873 fps100%
IMR 3031<<locked>>90%34,751 psi63%3035 fps95.7%
IMR 4198<<locked>>80%34,563 psi63%2923 fps98.5%
IMR 4227<<locked>>80%46,876 psi85%3133 fps100%
Lovex D073.4<<locked>>84%43,976 psi80%3166 fps95.4%
Lovex D073.6<<locked>>96%41,582 psi75%3150 fps95.1%
Lovex S053<<locked>>80%45,469 psi83%3077 fps100%
Norma 200<<locked>>80%37,521 psi68%3015 fps99%
Norma 202<<locked>>94%40,596 psi74%3110 fps95.7%
ReloadSwiss RS 14<<locked>>80%23,569 psi43%1923 fps100%
ReloadSwiss RS 36<<locked>>80%46,746 psi85%3163 fps100%
ReloadSwiss RS 40<<locked>>90%44,686 psi81%3173 fps95.5%
Rottweil R 901<<locked>>92%41,771 psi76%3104 fps95.6%
Shooters World AR Plus<<locked>>84%43,976 psi80%3166 fps95.4%
Shooters World Match Rifle<<locked>>96%41,582 psi75%3150 fps95.1%
SNPE Vectan BA6 1/2<<locked>>80%42,061 psi76%2861 fps100%
SNPE Vectan SP 10<<locked>>84%40,799 psi74%3107 fps95.5%
SNPE Vectan SP 3<<locked>>80%33,736 psi61%2923 fps95.3%
SNPE Vectan Tubal 3000<<locked>>92%40,872 psi74%3018 fps95.5%
SNPE Vectan Tubal 5000<<locked>>96%37,304 psi68%2949 fps95.7%
Somchem S335<<locked>>90%37,391 psi68%2963 fps95.6%
Vihtavuori N120<<locked>>80%39,465 psi72%3009 fps100%
Vihtavuori N130<<locked>>80%31,981 psi58%2828 fps96.6%
Vihtavuori N133<<locked>>84%31,183 psi57%2808 fps95.1%
Vihtavuori N135<<locked>>90%31,676 psi57%2907 fps95.8%
Vihtavuori N140<<locked>>94%38,218 psi69%3022 fps95.3%
Vihtavuori N540<<locked>>96%39,711 psi72%3064 fps95.2%
Winchester 748<<locked>>96%46,209 psi84%3251 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for 5.6 x 50 Mag. loaded with the .224 | 52gr | Nosler Custom Competition. IMR 3031 delivers the highest muzzle velocity at 3,343 fps; across all powders the maximum-charge window runs from 2,083 fps to 3,343 fps. Accurate 2495 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 52.0 gr projectile in 0.224" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Accurate 2520, Alliant Reloder-10x rank at the top here: for 5.6 x 50 Mag. with the .224 | 52gr | Nosler Custom Competition they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data