Load Specifications
Load data in caliber 5.6 x 50 Mag. with .224 | 50gr | Barnes Solid Spitz bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and ADI AR 2219.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 48,095 psi | 87% | 3182 fps | 99.6% |
| Accurate 2015 | <<locked>> | 98% | 48,182 psi | 87% | 3264 fps | 99.1% |
| Accurate 2460 | <<locked>> | 94% | 46,659 psi | 85% | 3241 fps | 96.2% |
| Accurate 2495ᴾ | <<locked>> | 100% | 39,305 psi | 71% | 3146 fps | 97.9% |
| Accurate LT-30 | <<locked>> | 90% | 48,646 psi | 88% | 3189 fps | 98% |
| Accurate LT-32 | <<locked>> | 90% | 49,066 psi | 89% | 3192 fps | 96.2% |
| ADI AR 2207 | <<locked>> | 88% | 48,095 psi | 87% | 3264 fps | 100% |
| ADI AR 2219 | <<locked>> | 92% | 49,632 psi | 90% | 3340 fps | 98.1% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 47,369 psi | 86% | 3346 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 94% | 48,733 psi | 88% | 3307 fps | 99.7% |
| Alliant Reloder-7 | <<locked>> | 86% | 46,586 psi | 85% | 3205 fps | 99.7% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 47,181 psi | 86% | 3159 fps | 98.1% |
| Hodgdon H322 | <<locked>> | 94% | 47,819 psi | 87% | 3307 fps | 97.8% |
| Hodgdon H335 | <<locked>> | 94% | 49,197 psi | 89% | 3320 fps | 97.1% |
| Hodgdon H4198 | <<locked>> | 86% | 47,268 psi | 86% | 3186 fps | 97.2% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,763 psi | 58% | 2110 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 45,063 psi | 82% | 3314 fps | 98% |
| IMR 4198 | <<locked>> | 94% | 49,763 psi | 90% | 3287 fps | 100% |
| IMR 4227 | <<locked>> | 82% | 47,427 psi | 86% | 3186 fps | 100% |
| Lovex S053 | <<locked>> | 84% | 48,704 psi | 88% | 3179 fps | 100% |
| Norma 200 | <<locked>> | 90% | 48,849 psi | 89% | 3291 fps | 99.9% |
| Norma 202ᴾ | <<locked>> | 100% | 45,687 psi | 83% | 3255 fps | 96.4% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,183 psi | 57% | 2149 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 47,195 psi | 86% | 3212 fps | 100% |
| Rottweil R 901 | <<locked>> | 98% | 47,224 psi | 86% | 3251 fps | 96.4% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 47,152 psi | 86% | 2989 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 46,818 psi | 85% | 3271 fps | 96.5% |
| SNPE Vectan SP 3 | <<locked>> | 94% | 49,342 psi | 90% | 3307 fps | 98.7% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 49,792 psi | 90% | 3228 fps | 97% |
| Somchem S335ᴾ | <<locked>> | 100% | 48,051 psi | 87% | 3219 fps | 97.7% |
| Vihtavuori N120 | <<locked>> | 88% | 48,095 psi | 87% | 3212 fps | 100% |
| Vihtavuori N130 | <<locked>> | 96% | 49,182 psi | 89% | 3241 fps | 99.6% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 48,704 psi | 88% | 3232 fps | 99.1% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 40,553 psi | 74% | 3166 fps | 98% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 43,584 psi | 79% | 3176 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 41,814 psi | 76% | 3061 fps | 98.8% |
| Accurate 2015 | <<locked>> | 86% | 32,663 psi | 59% | 2920 fps | 95.2% |
| Accurate 2460 | <<locked>> | 92% | 43,918 psi | 80% | 3186 fps | 95.5% |
| Accurate 2495 | <<locked>> | 94% | 31,966 psi | 58% | 2969 fps | 95.6% |
| Accurate LT-30 | <<locked>> | 82% | 38,116 psi | 69% | 2966 fps | 95.4% |
| Accurate LT-32 | <<locked>> | 88% | 46,296 psi | 84% | 3140 fps | 95.5% |
| ADI AR 2207 | <<locked>> | 80% | 37,130 psi | 67% | 3048 fps | 99.9% |
| ADI AR 2219 | 24.7 gr | 86% | 40,451 psi | 73% | 3150 fps | 95.9% |
| Alliant AR-Comp | <<locked>> | 84% | 28,166 psi | 51% | 2864 fps | 95.9% |
| Alliant Reloder-10x | 21 gr | 80% | 31,053 psi | 56% | 2900 fps | 95.8% |
| Alliant Reloder-7 | <<locked>> | 80% | 38,580 psi | 70% | 3038 fps | 98.5% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 36,216 psi | 66% | 2927 fps | 95.2% |
| Hodgdon H322 | 24.4 gr | 88% | 39,044 psi | 71% | 3117 fps | 95.4% |
| Hodgdon H335 | <<locked>> | 90% | 42,728 psi | 78% | 3189 fps | 95.5% |
| Hodgdon H4198 | <<locked>> | 82% | 42,003 psi | 76% | 3077 fps | 95.8% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,206 psi | 42% | 1893 fps | 100% |
| IMR 3031 | <<locked>> | 94% | 37,188 psi | 67% | 3130 fps | 95.8% |
| IMR 4198 | <<locked>> | 80% | 32,764 psi | 59% | 2910 fps | 97.3% |
| IMR 4227 | <<locked>> | 80% | 44,672 psi | 81% | 3133 fps | 100% |
| Lovex S053 | <<locked>> | 80% | 43,265 psi | 79% | 3081 fps | 100% |
| Norma 200 | <<locked>> | 80% | 35,360 psi | 64% | 3002 fps | 98% |
| Norma 202 | <<locked>> | 98% | 43,062 psi | 78% | 3199 fps | 95.6% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,858 psi | 41% | 1929 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 43,990 psi | 80% | 3150 fps | 99.9% |
| Rottweil R 901 | <<locked>> | 96% | 44,570 psi | 81% | 3199 fps | 95.7% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 40,393 psi | 73% | 2874 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 88% | 43,656 psi | 79% | 3205 fps | 95.6% |
| SNPE Vectan SP 3 | <<locked>> | 84% | 35,955 psi | 65% | 3018 fps | 95.4% |
| SNPE Vectan Tubal 3000 | <<locked>> | 96% | 43,511 psi | 79% | 3110 fps | 95.5% |
| Somchem S335 | <<locked>> | 94% | 39,943 psi | 72% | 3054 fps | 95.6% |
| Vihtavuori N120 | <<locked>> | 80% | 37,289 psi | 68% | 3009 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 29,834 psi | 54% | 2802 fps | 95% |
| Vihtavuori N133 | <<locked>> | 88% | 33,315 psi | 60% | 2900 fps | 95.2% |
| Vihtavuori N135 | <<locked>> | 94% | 33,344 psi | 61% | 2989 fps | 95.7% |
| Vihtavuori N140 | <<locked>> | 98% | 41,060 psi | 75% | 3120 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for 5.6 x 50 Mag. loaded with the .224 | 50gr | Barnes Solid Spitz. Alliant AR-Comp delivers the highest muzzle velocity at 3,346 fps; across all powders the maximum-charge window runs from 2,110 fps to 3,346 fps. Accurate 2495 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (380 MPa), the top charges use 57–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, ADI AR 2219 rank at the top here: for 5.6 x 50 Mag. with the .224 | 50gr | Barnes Solid Spitz they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.