Load data for 5.6 x 50 Mag. + .224 | 45gr | Rhino Solid Shank

5.6 x 50 Mag. cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:45 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi

Load data in caliber 5.6 x 50 Mag. with .224 | 45gr | Rhino Solid Shank bullet and 32 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%47,326 psi86%3317 fps99.2%
Accurate 2015<<locked>>98%47,355 psi86%3396 fps98.6%
Accurate 2460<<locked>>96%49,385 psi90%3435 fps96.2%
Accurate 2495ᴾ<<locked>>100%38,725 psi70%3271 fps97.1%
Accurate LT-30<<locked>>90%47,935 psi87%3323 fps97.3%
ADI AR 2207<<locked>>90%49,806 psi90%3458 fps100%
ADI AR 2219<<locked>>92%48,704 psi88%3471 fps97.4%
Alliant AR-Compᴾ<<locked>>100%46,296 psi84%3481 fps99.9%
Alliant Reloder-10x<<locked>>94%47,761 psi87%3445 fps99.3%
Alliant Reloder-7<<locked>>88%48,762 psi88%3402 fps99.6%
Baschieri & Pellagri 106<<locked>>92%49,821 psi90%3350 fps98.1%
Hodgdon H322<<locked>>94%47,036 psi85%3442 fps97%
Hodgdon H335<<locked>>94%48,443 psi88%3448 fps96.3%
Hodgdon H4198<<locked>>88%49,545 psi90%3383 fps97%
Hodgdon TrailBossᴾ<<locked>>100%31,488 psi57%2238 fps100%
IMR 3031ᴾ<<locked>>100%44,092 psi80%3438 fps97.2%
IMR 4198<<locked>>94%49,153 psi89%3435 fps99.8%
IMR 4227<<locked>>84%49,313 psi89%3379 fps100%
Lovex S053<<locked>>84%48,269 psi88%3337 fps100%
Norma 200<<locked>>90%47,834 psi87%3425 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%31,299 psi57%2290 fps100%
ReloadSwiss RS 36<<locked>>84%49,168 psi89%3406 fps100%
Rottweil R 901ᴾ<<locked>>100%49,153 psi89%3435 fps96.1%
SNPE Vectan BA6 1/2<<locked>>88%49,284 psi89%3186 fps100%
SNPE Vectan SP 10<<locked>>92%49,617 psi90%3471 fps96.5%
SNPE Vectan SP 3<<locked>>94%48,327 psi88%3442 fps98.1%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%48,936 psi89%3356 fps96.2%
Somchem S335ᴾ<<locked>>100%47,529 psi86%3350 fps97%
Vihtavuori N120<<locked>>90%49,864 psi90%3402 fps100%
Vihtavuori N130<<locked>>96%48,646 psi88%3383 fps99.3%
Vihtavuori N133ᴾ<<locked>>100%47,834 psi87%3366 fps98.5%
Vihtavuori N135ᴾ<<locked>>100%39,798 psi72%3291 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%41,394 psi75%3196 fps98.2%
Accurate 2015<<locked>>88%34,171 psi62%3097 fps95%
Accurate 2460<<locked>>94%46,035 psi84%3369 fps95.4%
Accurate 2495<<locked>>96%33,315 psi60%3136 fps95.3%
Accurate LT-30<<locked>>84%39,711 psi72%3146 fps95.1%
ADI AR 2207<<locked>>80%36,230 psi66%3176 fps99.6%
ADI AR 221926.6 gr88%42,453 psi77%3340 fps95.8%
Alliant AR-Comp<<locked>>86%29,486 psi54%3038 fps95.7%
Alliant Reloder-10x22.7 gr82%32,518 psi59%3084 fps95.6%
Alliant Reloder-7<<locked>>80%38,014 psi69%3169 fps97.9%
Baschieri & Pellagri 106<<locked>>84%38,290 psi69%3110 fps95.2%
Hodgdon H32226.3 gr90%40,973 psi74%3304 fps95.3%
Hodgdon H335<<locked>>92%45,281 psi82%3386 fps95.5%
Hodgdon H4198<<locked>>84%43,772 psi79%3264 fps95.6%
Hodgdon TrailBoss<<locked>>80%22,974 psi42%2011 fps100%
IMR 3031<<locked>>96%38,827 psi70%3314 fps95.6%
IMR 4198<<locked>>80%32,242 psi59%3035 fps96.4%
IMR 4227<<locked>>80%43,424 psi79%3268 fps99.8%
Lovex S053<<locked>>80%42,612 psi77%3228 fps100%
Norma 200<<locked>>80%34,316 psi62%3117 fps97.1%
ReloadSwiss RS 14<<locked>>80%22,582 psi41%2051 fps100%
ReloadSwiss RS 36<<locked>>80%43,381 psi79%3294 fps99.8%
Rottweil R 901<<locked>>98%46,543 psi84%3386 fps95.5%
SNPE Vectan BA6 1/2<<locked>>80%39,247 psi71%3009 fps100%
SNPE Vectan SP 10<<locked>>90%46,412 psi84%3406 fps95.6%
SNPE Vectan SP 3<<locked>>86%37,376 psi68%3199 fps95.1%
SNPE Vectan Tubal 3000<<locked>>98%45,643 psi83%3294 fps95.4%
Somchem S335<<locked>>96%41,611 psi76%3228 fps95.4%
Vihtavuori N120<<locked>>80%36,405 psi66%3140 fps100%
Vihtavuori N130<<locked>>84%33,460 psi61%3041 fps95.7%
Vihtavuori N133<<locked>>90%34,824 psi63%3074 fps95%
Vihtavuori N135<<locked>>96%34,954 psi63%3166 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 32 powders for 5.6 x 50 Mag. loaded with the .224 | 45gr | Rhino Solid Shank. Alliant AR-Comp delivers the highest muzzle velocity at 3,481 fps; across all powders the maximum-charge window runs from 2,238 fps to 3,481 fps. Accurate 2495 gives the best case fill at 100 %, and 32 of the 32 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 57–90 %, leaving at least 10 % headroom. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, ADI AR 2219 rank at the top here: for 5.6 x 50 Mag. with the .224 | 45gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data