Load data for 5.6 x 50 Mag. + .224 | 45gr | Fox Classic Hunter

5.6 x 50 Mag. cartridge drawing
Fox Bullets logo

Load Specifications

Bullet Manufacturer:Fox Bullets
Bullet Weight:45 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:10.5

Load data in caliber 5.6 x 50 Mag. with .224 | 45gr | Fox Classic Hunter bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%48,428 psi88%3323 fps99.1%
Accurate 2015ᴾ<<locked>>100%47,950 psi87%3396 fps98.4%
Accurate 2495ᴾ<<locked>>100%36,114 psi66%3202 fps96%
Accurate LT-30<<locked>>92%49,124 psi89%3330 fps97.3%
ADI AR 2207<<locked>>90%48,312 psi88%3422 fps100%
ADI AR 2219<<locked>>92%46,659 psi85%3415 fps96.5%
Alliant AR-Compᴾ<<locked>>100%44,222 psi80%3422 fps99.6%
Alliant Reloder-10x<<locked>>96%48,704 psi88%3451 fps99.3%
Alliant Reloder-7<<locked>>88%46,905 psi85%3353 fps99.3%
Baschieri & Pellagri 106<<locked>>92%48,153 psi87%3304 fps97.5%
Hodgdon H322<<locked>>96%48,327 psi88%3451 fps97%
Hodgdon H4198<<locked>>88%47,819 psi87%3330 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%30,980 psi56%2211 fps100%
IMR 3031ᴾ<<locked>>100%42,177 psi77%3379 fps96.3%
IMR 4198<<locked>>94%47,282 psi86%3389 fps99.6%
IMR 4227<<locked>>84%47,761 psi87%3340 fps100%
Lovex S053<<locked>>86%49,487 psi90%3343 fps100%
Norma 200<<locked>>92%48,689 psi88%3432 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,806 psi56%2264 fps100%
ReloadSwiss RS 36<<locked>>84%47,703 psi87%3366 fps99.9%
SNPE Vectan BA6 1/2<<locked>>88%47,659 psi86%3146 fps100%
SNPE Vectan SP 3<<locked>>96%49,371 psi90%3448 fps98%
Somchem S335ᴾ<<locked>>100%45,150 psi82%3291 fps96.1%
Vihtavuori N120<<locked>>90%48,356 psi88%3369 fps100%
Vihtavuori N130<<locked>>98%49,835 psi90%3392 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%45,788 psi83%3310 fps97.9%
Vihtavuori N135ᴾ<<locked>>100%37,869 psi69%3228 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,842 psi72%3146 fps97.6%
Accurate 2015<<locked>>92%36,738 psi67%3153 fps95.6%
Accurate 2495<<locked>>98%33,808 psi61%3143 fps95.2%
Accurate LT-30<<locked>>86%40,886 psi74%3156 fps95.1%
ADI AR 2207<<locked>>80%34,751 psi63%3127 fps99.2%
ADI AR 221926.2 gr90%43,439 psi79%3346 fps95.6%
Alliant AR-Comp<<locked>>88%29,878 psi54%3038 fps95.5%
Alliant Reloder-10x22.4 gr84%33,170 psi60%3091 fps95.6%
Alliant Reloder-7<<locked>>80%36,680 psi67%3127 fps97.3%
Baschieri & Pellagri 106<<locked>>86%39,102 psi71%3117 fps95.1%
Hodgdon H32225.9 gr92%41,930 psi76%3310 fps95.2%
Hodgdon H4198<<locked>>86%45,121 psi82%3278 fps95.6%
Hodgdon TrailBoss<<locked>>80%22,684 psi41%1988 fps100%
IMR 3031<<locked>>98%39,247 psi71%3307 fps95.3%
IMR 4198<<locked>>80%31,328 psi57%2995 fps95.7%
IMR 4227<<locked>>80%42,351 psi77%3228 fps99.6%
Lovex S053<<locked>>80%41,481 psi75%3196 fps100%
Norma 200<<locked>>80%32,924 psi60%3071 fps96.3%
ReloadSwiss RS 14<<locked>>80%22,669 psi41%2041 fps100%
ReloadSwiss RS 36<<locked>>80%41,945 psi76%3251 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%38,072 psi69%2976 fps100%
SNPE Vectan SP 3<<locked>>88%38,392 psi70%3209 fps95.1%
Somchem S335<<locked>>98%42,641 psi77%3238 fps95.4%
Vihtavuori N120<<locked>>80%34,940 psi63%3094 fps99.8%
Vihtavuori N130<<locked>>86%34,229 psi62%3051 fps95.7%
Vihtavuori N133<<locked>>92%35,795 psi65%3087 fps95%
Vihtavuori N135<<locked>>98%35,607 psi65%3173 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 5.6 x 50 Mag. loaded with the .224 | 45gr | Fox Classic Hunter. Alliant Reloder-10x delivers the highest muzzle velocity at 3,451 fps; across all powders the maximum-charge window runs from 2,211 fps to 3,451 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, ADI AR 2219 rank at the top here: for 5.6 x 50 Mag. with the .224 | 45gr | Fox Classic Hunter they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data