top of page

Load data for 5.6 x 50 Mag. + .224 | 40gr | Hornady V-MAX

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

5.6 x 50 Mag. + .224 | 40gr | Hornady V-MAX

Load Specifications

Bullet:
.224 | 40gr | Hornady V-MAX
Manufacturer SKU:
22241
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.689" | 17.5mm
Caliber:
5.6 x 50 Mag.
Case Length (l3):
1.968" | 50.0mm
Cartridge Length (C.O.L.):
2.377" | 60.4mm
Seated Depth:
0.280" | 7.1mm
Shank Seated Depth:
0.220" | 5.6mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
55114 psi | 3800 bar
LID:
LID_B2502_C914

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 62 loads in caliber 5.6 x 50 Mag. with .224 | 40gr | Hornady V-MAX bullet and 31 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
92%
49284
89%
**06
100%
ADI AR 2219
<<locked>>
94%
48602
88%
**06
96%
Accurate 1680
<<locked>>
83%
48399
88%
**33
97%
Accurate 2015
<<locked>>
97%
42931
78%
**58
97%
[Accurate 2460]*
<<locked>>
96%
45295
82%
**68
92%
[Accurate 2495]*
<<locked>>
96%
33605
61%
**10
93%
Alliant AR-Comp
<<locked>>
96%
37536
68%
**02
97%
Alliant Reloder-10x
<<locked>>
96%
46166
84%
**63
98%
Alliant Reloder-7 👍
<<locked>>
91%
49400
90%
**60
99%
Baschieri & Pellagri 106
<<locked>>
94%
49429
90%
**74
97%
[Hodgdon H322]*
<<locked>>
97%
42873
78%
**78
94%
Hodgdon H335
<<locked>>
95%
48762
88%
**86
95%
Hodgdon H4198
<<locked>>
92%
49211
89%
**10
95%
Hodgdon TrailBoss
<<locked>>
97%
29356
53%
**13
100%
IMR 4198 👍
<<locked>>
97%
49313
89%
**93
99%
IMR 4227
<<locked>>
85%
48109
87%
**14
100%
[Lovex D073.4]*
<<locked>>
96%
48109
87%
**10
92%
[Lovex D073.5]*
<<locked>>
97%
46412
84%
**97
92%
Lovex S053
<<locked>>
87%
49269
89%
**14
100%
Norma 200 👍
<<locked>>
93%
48066
87%
**79
99%
ReloadSwiss RS 14
<<locked>>
97%
28921
52%
**59
100%
ReloadSwiss RS 36
<<locked>>
86%
49313
89%
**63
100%
[ReloadSwiss RS 40]*
<<locked>>
97%
46847
85%
**17
93%
[Rottweil R 901]*
<<locked>>
97%
40785
74%
**83
92%
SNPE Vectan BA6 1/2
<<locked>>
90%
48457
88%
**33
100%
SNPE Vectan SP 10
<<locked>>
94%
48878
89%
**93
95%
[SNPE Vectan Tubal 3000]*
<<locked>>
97%
40640
74%
**14
92%
[Somchem S335]*
<<locked>>
96%
38609
70%
**81
93%
Vihtavuori N120 👍
<<locked>>
94%
47950
87%
**33
100%
Vihtavuori N130
<<locked>>
97%
44730
81%
**48
98%
[Vihtavuori N133]*
<<locked>>
96%
35505
64%
**22
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33750
61%
**58
98%
[ADI AR 2219]*
<<locked>>
84%
33881
61%
**41
90%
Accurate 1680
<<locked>>
81%
45049
82%
**55
96%
[Accurate 2015]*
<<locked>>
83%
27659
50%
**35
90%
[Accurate 2460]*
<<locked>>
93%
40886
74%
**73
90%
[Accurate 2495]*
<<locked>>
92%
28543
52%
**56
91%
[Alliant AR-Comp]*
<<locked>>
84%
25266
46%
**79
90%
[Alliant Reloder-10x]*
<<locked>>
81%
28398
52%
**84
92%
Alliant Reloder-7
<<locked>>
81%
35679
65%
**55
96%
[Baschieri & Pellagri 106]*
<<locked>>
81%
31850
58%
**54
90%
[Hodgdon H322]*
<<locked>>
90%
34490
63%
**51
90%
[Hodgdon H335]*
<<locked>>
87%
37028
67%
**10
90%
[Hodgdon H4198]*
<<locked>>
81%
34606
63%
**59
90%
Hodgdon TrailBoss
<<locked>>
81%
22785
41%
**26
100%
[IMR 4198]*
<<locked>>
81%
31082
56%
**23
94%
IMR 4227
<<locked>>
81%
41495
75%
**79
99%
[Lovex D073.4]*
<<locked>>
93%
43018
78%
**06
91%
[Lovex D073.5]*
<<locked>>
94%
41423
75%
**89
90%
Lovex S053
<<locked>>
81%
40959
74%
**46
100%
Norma 200
<<locked>>
81%
32271
59%
**96
95%
ReloadSwiss RS 14
<<locked>>
81%
22452
41%
**72
100%
ReloadSwiss RS 36
<<locked>>
81%
41263
75%
**96
99%
[ReloadSwiss RS 40]*
<<locked>>
92%
40814
74%
**89
91%
[Rottweil R 901]*
<<locked>>
94%
36593
66%
**74
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
37637
68%
**33
100%
[SNPE Vectan SP 10]*
<<locked>>
86%
36796
67%
**10
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
93%
36332
66%
**05
90%
[Somchem S335]*
<<locked>>
92%
33330
60%
**43
90%
Vihtavuori N120
<<locked>>
81%
31763
58%
**63
99%
[Vihtavuori N130]*
<<locked>>
81%
26861
49%
**66
91%
[Vihtavuori N133]*
<<locked>>
90%
29747
54%
**54
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page