Load data for 5.6 x 50 Mag. + .223 | 55gr | SUS-TAC Penmax (HPT)

5.6 x 50 Mag. cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:55 gr
Bullet Diameter:0.223"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:9.0

Load data in caliber 5.6 x 50 Mag. with .223 | 55gr | SUS-TAC Penmax (HPT) bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Accurate 2520 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%46,804 psi85%3035 fps99.8%
Accurate 2015<<locked>>96%47,442 psi86%3127 fps99.5%
Accurate 2460<<locked>>94%49,647 psi90%3176 fps97.7%
Accurate 2495ᴾ<<locked>>100%42,380 psi77%3091 fps99.1%
Accurate 2520<<locked>>96%46,630 psi85%3159 fps96.8%
Accurate 4064ᴾ<<locked>>100%39,320 psi71%3041 fps96.2%
Accurate LT-30<<locked>>88%47,863 psi87%3051 fps98.6%
Accurate LT-32<<locked>>88%48,254 psi88%3058 fps96.9%
ADI AR 2207<<locked>>86%47,427 psi86%3117 fps100%
ADI AR 2219<<locked>>90%48,733 psi88%3199 fps98.6%
Alliant AR-Comp<<locked>>98%47,311 psi86%3219 fps100%
Alliant Reloder-10x<<locked>>92%48,385 psi88%3173 fps99.9%
Alliant Reloder-7<<locked>>86%49,240 psi89%3123 fps100%
Baschieri & Pellagri 106<<locked>>90%49,530 psi90%3084 fps99.1%
Hodgdon H322<<locked>>92%47,543 psi86%3179 fps98.4%
Hodgdon H335<<locked>>92%48,588 psi88%3189 fps97.8%
Hodgdon H4198<<locked>>86%49,792 psi90%3110 fps98.4%
Hodgdon TrailBossᴾ<<locked>>100%31,966 psi58%2011 fps100%
IMR 3031ᴾ<<locked>>100%47,979 psi87%3248 fps99.2%
IMR 4198<<locked>>92%49,559 psi90%3153 fps100%
IMR 4227<<locked>>82%49,197 psi89%3081 fps100%
Lovex D073.4<<locked>>86%46,572 psi85%3133 fps96.4%
Lovex D073.6ᴾ<<locked>>100%47,442 psi86%3186 fps96.9%
Lovex S053<<locked>>82%48,138 psi87%3031 fps100%
Norma 200<<locked>>88%48,486 psi88%3150 fps100%
Norma 202ᴾ<<locked>>100%48,515 psi88%3186 fps97.8%
ReloadSwiss RS 14ᴾ<<locked>>100%31,952 psi58%2060 fps100%
ReloadSwiss RS 36<<locked>>82%49,240 psi89%3114 fps100%
ReloadSwiss RS 40<<locked>>92%47,297 psi86%3140 fps96.4%
Rottweil R 901<<locked>>96%47,123 psi86%3127 fps97.2%
Shooters World AR Plus<<locked>>86%46,572 psi85%3133 fps96.4%
Shooters World Match Rifleᴾ<<locked>>100%47,442 psi86%3186 fps96.9%
SNPE Vectan BA6 1/2<<locked>>86%49,168 psi89%2884 fps100%
SNPE Vectan SP 10<<locked>>90%49,530 psi90%3202 fps97.9%
SNPE Vectan SP 3<<locked>>92%48,979 psi89%3173 fps99.2%
SNPE Vectan Tubal 3000<<locked>>98%49,284 psi89%3100 fps97.7%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%41,959 psi76%2972 fps97.3%
Somchem S335<<locked>>98%47,326 psi86%3087 fps98.3%
Vihtavuori N120<<locked>>86%47,442 psi86%3064 fps100%
Vihtavuori N130<<locked>>94%48,733 psi88%3107 fps99.9%
Vihtavuori N133<<locked>>98%48,443 psi88%3107 fps99.5%
Vihtavuori N135ᴾ<<locked>>100%43,279 psi79%3100 fps99.1%
Vihtavuori N140ᴾ<<locked>>100%46,238 psi84%3110 fps97.7%
Vihtavuori N540ᴾ<<locked>>100%44,875 psi81%3094 fps96.9%
Winchester 748<<locked>>98%48,921 psi89%3222 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%44,135 psi80%2986 fps99.6%
Accurate 2015<<locked>>82%30,530 psi55%2746 fps95.4%
Accurate 2460<<locked>>88%40,408 psi73%2995 fps95.5%
Accurate 2495<<locked>>90%29,849 psi54%2799 fps95.7%
Accurate 252026.6 gr92%40,669 psi74%3038 fps95.1%
Accurate 4064<<locked>>98%36,506 psi66%2976 fps95.3%
Accurate LT-30<<locked>>80%37,362 psi68%2835 fps96.2%
Accurate LT-32<<locked>>84%42,409 psi77%2943 fps95.4%
ADI AR 2207<<locked>>80%39,378 psi71%2966 fps100%
ADI AR 2219<<locked>>82%37,333 psi68%2959 fps95.9%
Alliant AR-Comp<<locked>>80%26,223 psi48%2690 fps96%
Alliant Reloder-10x20.7 gr80%33,083 psi60%2841 fps97.5%
Alliant Reloder-7<<locked>>80%40,741 psi74%2963 fps99.4%
Baschieri & Pellagri 106<<locked>>80%35,897 psi65%2808 fps96.1%
Hodgdon H32223 gr84%36,419 psi66%2936 fps95.6%
Hodgdon H335<<locked>>86%39,755 psi72%3009 fps95.6%
Hodgdon H4198<<locked>>80%41,133 psi75%2940 fps96.6%
Hodgdon TrailBoss<<locked>>80%23,670 psi43%1808 fps100%
IMR 3031<<locked>>90%34,490 psi63%2946 fps95.9%
IMR 4198<<locked>>80%34,418 psi62%2838 fps98.6%
IMR 4227<<locked>>80%46,267 psi84%3028 fps100%
Lovex D073.4<<locked>>84%43,221 psi78%3068 fps95.5%
Lovex D073.6<<locked>>96%41,307 psi75%3064 fps95.3%
Lovex S053<<locked>>80%45,281 psi82%2982 fps100%
Norma 200<<locked>>80%37,188 psi67%2927 fps99.1%
Norma 202<<locked>>92%37,666 psi68%2963 fps95%
ReloadSwiss RS 14<<locked>>80%23,380 psi42%1844 fps100%
ReloadSwiss RS 36<<locked>>80%46,412 psi84%3064 fps100%
ReloadSwiss RS 40<<locked>>90%44,077 psi80%3077 fps95.6%
Rottweil R 901<<locked>>90%39,059 psi71%2959 fps95%
Shooters World AR Plus<<locked>>84%43,221 psi78%3068 fps95.5%
Shooters World Match Rifle<<locked>>96%41,307 psi75%3064 fps95.3%
SNPE Vectan BA6 1/2<<locked>>80%42,076 psi76%2772 fps100%
SNPE Vectan SP 10<<locked>>84%40,625 psi74%3022 fps95.7%
SNPE Vectan SP 3<<locked>>80%33,373 psi61%2835 fps95.5%
SNPE Vectan Tubal 3000<<locked>>92%40,596 psi74%2933 fps95.7%
SNPE Vectan Tubal 5000<<locked>>94%34,635 psi63%2808 fps95%
Somchem S335<<locked>>88%35,012 psi64%2825 fps95%
Vihtavuori N120<<locked>>80%39,494 psi72%2923 fps100%
Vihtavuori N130<<locked>>80%31,647 psi57%2740 fps96.8%
Vihtavuori N133<<locked>>84%31,024 psi56%2726 fps95.4%
Vihtavuori N135<<locked>>88%29,443 psi53%2766 fps95.1%
Vihtavuori N140<<locked>>94%38,203 psi69%2943 fps95.5%
Vihtavuori N540<<locked>>96%39,421 psi72%2982 fps95.3%
Winchester 748<<locked>>96%45,571 psi83%3156 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for 5.6 x 50 Mag. loaded with the .223 | 55gr | SUS-TAC Penmax (HPT). IMR 3031 delivers the highest muzzle velocity at 3,248 fps; across all powders the maximum-charge window runs from 2,011 fps to 3,248 fps. Accurate 2495 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.223" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Accurate 2520, Alliant Reloder-10x rank at the top here: for 5.6 x 50 Mag. with the .223 | 55gr | SUS-TAC Penmax (HPT) they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data