Load data for 5.6 x 50 Mag. + .223 | 55gr | SUS-TAC HP

5.6 x 50 Mag. cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:55 gr
Bullet Diameter:0.223"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:10.0

Load data in caliber 5.6 x 50 Mag. with .223 | 55gr | SUS-TAC HP bullet and 46 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Accurate 2520 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%47,384 psi86%3051 fps99.8%
Accurate 2015<<locked>>96%48,631 psi88%3150 fps99.6%
Accurate 2460<<locked>>92%47,297 psi86%3136 fps97.4%
Accurate 2495ᴾ<<locked>>100%43,062 psi78%3107 fps99.3%
Accurate 2520<<locked>>96%47,776 psi87%3186 fps97.1%
Accurate 4064ᴾ<<locked>>100%39,958 psi73%3061 fps96.5%
Accurate LT-30<<locked>>88%48,385 psi88%3068 fps98.7%
Accurate LT-32<<locked>>88%48,849 psi89%3077 fps97.2%
ADI AR 2207<<locked>>86%48,153 psi87%3133 fps100%
ADI AR 2219<<locked>>88%46,441 psi84%3163 fps98.3%
Alliant AR-Comp<<locked>>98%47,921 psi87%3232 fps100%
Alliant Reloder-10x<<locked>>92%49,052 psi89%3189 fps100%
Alliant Reloder-7<<locked>>84%46,543 psi84%3081 fps99.9%
Baschieri & Pellagri 106<<locked>>88%47,326 psi86%3048 fps98.9%
Hodgdon Benchmark<<locked>>94%48,051 psi87%3107 fps95.8%
Hodgdon BL-C2<<locked>>98%48,341 psi88%3212 fps96%
Hodgdon H322<<locked>>92%48,182 psi87%3196 fps98.6%
Hodgdon H335<<locked>>92%49,124 psi89%3202 fps98%
Hodgdon H4198<<locked>>84%46,978 psi85%3064 fps98%
Hodgdon TrailBossᴾ<<locked>>100%31,966 psi58%2018 fps100%
IMR 3031ᴾ<<locked>>100%48,544 psi88%3264 fps99.3%
IMR 4198<<locked>>90%47,398 psi86%3120 fps100%
Lovex D073.4<<locked>>86%47,166 psi86%3150 fps96.6%
Lovex D073.5<<locked>>92%47,471 psi86%3136 fps96.1%
Lovex D073.6ᴾ<<locked>>100%48,559 psi88%3209 fps97.3%
Lovex S053<<locked>>82%48,921 psi89%3048 fps100%
Norma 200<<locked>>88%49,182 psi89%3169 fps100%
Norma 202ᴾ<<locked>>100%49,676 psi90%3212 fps98.1%
ReloadSwiss RS 14ᴾ<<locked>>100%31,966 psi58%2064 fps100%
ReloadSwiss RS 40<<locked>>92%47,805 psi87%3156 fps96.7%
Rottweil R 901<<locked>>96%47,688 psi87%3146 fps97.4%
Shooters World AR Plus<<locked>>86%47,166 psi86%3150 fps96.6%
Shooters World Match Rifleᴾ<<locked>>100%48,559 psi88%3209 fps97.3%
SNPE Vectan BA6 1/2<<locked>>84%47,152 psi86%2858 fps100%
SNPE Vectan SP 10<<locked>>88%47,282 psi86%3166 fps97.5%
SNPE Vectan SP 3<<locked>>92%49,661 psi90%3189 fps99.3%
SNPE Vectan Tubal 3000<<locked>>98%49,864 psi90%3117 fps97.9%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%42,424 psi77%2986 fps97.5%
Somchem S335<<locked>>98%48,356 psi88%3110 fps98.5%
Vihtavuori N120<<locked>>86%48,196 psi87%3081 fps100%
Vihtavuori N130<<locked>>94%49,327 psi90%3120 fps99.9%
Vihtavuori N133<<locked>>98%48,994 psi89%3120 fps99.6%
Vihtavuori N135ᴾ<<locked>>100%43,874 psi80%3117 fps99.3%
Vihtavuori N140ᴾ<<locked>>100%46,731 psi85%3123 fps97.9%
Vihtavuori N540ᴾ<<locked>>100%45,281 psi82%3110 fps97.1%
Winchester 748<<locked>>98%49,342 psi90%3238 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%44,179 psi80%2992 fps99.6%
Accurate 2015<<locked>>82%30,676 psi56%2756 fps95.5%
Accurate 2460<<locked>>88%40,930 psi74%3012 fps95.8%
Accurate 2495<<locked>>88%28,558 psi52%2762 fps95.2%
Accurate 252026.9 gr92%41,205 psi75%3054 fps95.4%
Accurate 4064<<locked>>98%37,550 psi68%3005 fps95.7%
Accurate LT-30<<locked>>80%37,913 psi69%2854 fps96.4%
Accurate LT-32<<locked>>82%40,596 psi74%2910 fps95%
ADI AR 2207<<locked>>80%39,595 psi72%2972 fps100%
ADI AR 2219<<locked>>80%35,259 psi64%2910 fps95.2%
Alliant AR-Comp<<locked>>80%26,701 psi48%2713 fps96.4%
Alliant Reloder-10x20.9 gr80%33,301 psi60%2851 fps97.7%
Alliant Reloder-7<<locked>>80%41,394 psi75%2982 fps99.6%
Baschieri & Pellagri 106<<locked>>80%36,318 psi66%2825 fps96.4%
Hodgdon Benchmark<<locked>>92%44,904 psi81%3045 fps95%
Hodgdon BL-C2<<locked>>96%44,918 psi82%3146 fps95.1%
Hodgdon H32223.3 gr84%36,985 psi67%2956 fps95.9%
Hodgdon H335<<locked>>86%40,234 psi73%3025 fps95.8%
Hodgdon H4198<<locked>>80%41,800 psi76%2959 fps96.9%
Hodgdon TrailBoss<<locked>>80%23,786 psi43%1818 fps100%
IMR 3031<<locked>>88%32,953 psi60%2910 fps95.3%
IMR 4198<<locked>>80%35,070 psi64%2858 fps98.8%
Lovex D073.4<<locked>>82%41,220 psi75%3028 fps95%
Lovex D073.5<<locked>>90%44,193 psi80%3071 fps95.2%
Lovex D073.6<<locked>>96%41,829 psi76%3081 fps95.6%
Lovex S053<<locked>>80%46,093 psi84%3002 fps100%
Norma 200<<locked>>80%37,840 psi69%2943 fps99.2%
Norma 202<<locked>>92%38,189 psi69%2979 fps95.2%
ReloadSwiss RS 14<<locked>>80%23,482 psi43%1854 fps100%
ReloadSwiss RS 40<<locked>>88%42,032 psi76%3038 fps95.1%
Rottweil R 901<<locked>>90%39,653 psi72%2976 fps95.3%
Shooters World AR Plus<<locked>>82%41,220 psi75%3028 fps95%
Shooters World Match Rifle<<locked>>96%41,829 psi76%3081 fps95.6%
SNPE Vectan BA6 1/2<<locked>>80%42,337 psi77%2779 fps100%
SNPE Vectan SP 10<<locked>>82%38,377 psi70%2976 fps95.1%
SNPE Vectan SP 3<<locked>>80%33,953 psi62%2854 fps95.8%
SNPE Vectan Tubal 3000<<locked>>90%38,696 psi70%2897 fps95.2%
SNPE Vectan Tubal 5000<<locked>>94%35,056 psi64%2822 fps95.3%
Somchem S335<<locked>>88%35,476 psi64%2841 fps95.3%
Vihtavuori N120<<locked>>80%39,697 psi72%2930 fps100%
Vihtavuori N130<<locked>>80%32,227 psi58%2759 fps97.1%
Vihtavuori N133<<locked>>84%31,517 psi57%2746 fps95.7%
Vihtavuori N135<<locked>>88%29,936 psi54%2785 fps95.5%
Vihtavuori N140<<locked>>94%38,653 psi70%2959 fps95.8%
Vihtavuori N540<<locked>>96%39,856 psi72%2995 fps95.6%
Winchester 748<<locked>>96%46,557 psi84%3182 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 46 powders for 5.6 x 50 Mag. loaded with the .223 | 55gr | SUS-TAC HP. IMR 3031 delivers the highest muzzle velocity at 3,264 fps; across all powders the maximum-charge window runs from 2,018 fps to 3,264 fps. Accurate 2495 gives the best case fill at 100 %, and 46 of the 46 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.223" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Accurate 2520, Alliant Reloder-10x rank at the top here: for 5.6 x 50 Mag. with the .223 | 55gr | SUS-TAC HP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data