Load data for 5.6 x 50 Mag. + .223 | 45gr | Merlin Virtus

5.6 x 50 Mag. cartridge drawing
Virtus logo

Load Specifications

Bullet Manufacturer:Virtus
Bullet Weight:45 gr
Bullet Diameter:0.223"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi
Recommended Twist Rate:1:11.5

Load data in caliber 5.6 x 50 Mag. with .223 | 45gr | Merlin Virtus bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%48,660 psi88%3343 fps99.3%
Accurate 2015ᴾ<<locked>>100%47,268 psi86%3392 fps98.4%
Accurate 2495ᴾ<<locked>>100%35,549 psi65%3199 fps96%
Accurate LT-30<<locked>>92%48,863 psi89%3337 fps97.4%
ADI AR 2207<<locked>>90%47,471 psi86%3415 fps100%
ADI AR 2219<<locked>>92%46,789 psi85%3432 fps96.8%
Alliant AR-Compᴾ<<locked>>100%44,280 psi80%3435 fps99.7%
Alliant Reloder-10x<<locked>>96%48,254 psi88%3455 fps99.3%
Alliant Reloder-7<<locked>>90%49,835 psi90%3422 fps99.6%
Baschieri & Pellagri 106<<locked>>92%47,718 psi87%3307 fps97.6%
Hodgdon H322<<locked>>96%47,906 psi87%3455 fps97%
Hodgdon H335<<locked>>96%49,443 psi90%3468 fps96.4%
Hodgdon H4198<<locked>>88%47,616 psi86%3343 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%30,908 psi56%2224 fps100%
IMR 3031ᴾ<<locked>>100%41,626 psi76%3379 fps96.3%
IMR 4198<<locked>>94%47,152 psi86%3396 fps99.6%
IMR 4227<<locked>>84%47,805 psi87%3353 fps100%
Lovex S053<<locked>>86%48,791 psi89%3346 fps100%
Norma 200<<locked>>92%47,993 psi87%3432 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,589 psi56%2274 fps100%
ReloadSwiss RS 36<<locked>>84%47,529 psi86%3376 fps100%
SNPE Vectan BA6 1/2<<locked>>88%47,137 psi86%3150 fps100%
SNPE Vectan SP 3<<locked>>96%49,705 psi90%3468 fps98.2%
Somchem S335ᴾ<<locked>>100%44,991 psi82%3301 fps96.2%
Vihtavuori N120<<locked>>90%47,572 psi86%3366 fps100%
Vihtavuori N130<<locked>>98%49,371 psi90%3396 fps99.3%
Vihtavuori N133ᴾ<<locked>>100%45,397 psi82%3317 fps98%
Vihtavuori N135ᴾ<<locked>>100%37,289 psi68%3228 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,479 psi72%3153 fps97.7%
Accurate 2015<<locked>>92%36,622 psi66%3163 fps95.8%
Accurate 2495<<locked>>98%32,793 psi60%3127 fps95%
Accurate LT-30<<locked>>86%40,640 psi74%3166 fps95.2%
ADI AR 2207<<locked>>80%34,461 psi63%3136 fps99.3%
ADI AR 221926.7 gr90%43,584 psi79%3363 fps95.9%
Alliant AR-Comp<<locked>>88%29,385 psi53%3035 fps95.4%
Alliant Reloder-10x22.7 gr84%32,285 psi59%3081 fps95.4%
Alliant Reloder-7<<locked>>80%35,853 psi65%3117 fps97.2%
Baschieri & Pellagri 106<<locked>>86%39,160 psi71%3130 fps95.3%
Hodgdon H32226.4 gr92%42,032 psi76%3327 fps95.4%
Hodgdon H335<<locked>>94%46,050 psi84%3399 fps95.5%
Hodgdon H4198<<locked>>86%44,991 psi82%3284 fps95.8%
Hodgdon TrailBoss<<locked>>80%22,234 psi40%1991 fps100%
IMR 3031<<locked>>98%39,218 psi71%3320 fps95.5%
IMR 4198<<locked>>80%30,777 psi56%2992 fps95.6%
IMR 4227<<locked>>80%41,829 psi76%3232 fps99.6%
Lovex S053<<locked>>80%40,886 psi74%3196 fps100%
Norma 200<<locked>>80%32,256 psi59%3068 fps96.3%
ReloadSwiss RS 14<<locked>>80%22,147 psi40%2041 fps100%
ReloadSwiss RS 36<<locked>>80%41,307 psi75%3251 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%37,579 psi68%2979 fps100%
SNPE Vectan SP 3<<locked>>88%38,087 psi69%3215 fps95.2%
Somchem S335<<locked>>98%41,974 psi76%3235 fps95.4%
Vihtavuori N120<<locked>>80%34,679 psi63%3100 fps99.8%
Vihtavuori N130<<locked>>86%33,446 psi61%3041 fps95.6%
Vihtavuori N133<<locked>>92%35,433 psi64%3091 fps95.1%
Vihtavuori N135<<locked>>98%35,085 psi64%3169 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for 5.6 x 50 Mag. loaded with the .223 | 45gr | Merlin Virtus. Hodgdon H335 delivers the highest muzzle velocity at 3,468 fps; across all powders the maximum-charge window runs from 2,224 fps to 3,468 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.223" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, ADI AR 2219 rank at the top here: for 5.6 x 50 Mag. with the .223 | 45gr | Merlin Virtus they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data