Load data for 5.6 x 50 Mag. + .222 | 45gr | Peregrine VRG-3

5.6 x 50 Mag. cartridge drawing
Peregrine logo

Load Specifications

Bullet Manufacturer:Peregrine
Bullet Weight:45 gr
Bullet Diameter:0.222"
Bullet Length:<<locked>>
Case Length (l3):1.968"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:23.62"
Max. allowed Pressure:55,114 psi

Load data in caliber 5.6 x 50 Mag. with .222 | 45gr | Peregrine VRG-3 bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, SNPE Vectan SP 3 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%48,283 psi88%3330 fps99.2%
Accurate 2015ᴾ<<locked>>100%46,891 psi85%3386 fps98.3%
Accurate 2460<<locked>>98%49,661 psi90%3438 fps96.1%
Accurate LT-30<<locked>>92%48,472 psi88%3327 fps97.2%
ADI AR 2207<<locked>>90%47,543 psi86%3415 fps100%
ADI AR 2219<<locked>>94%49,284 psi89%3478 fps97.3%
Alliant AR-Compᴾ<<locked>>100%43,424 psi79%3415 fps99.6%
Alliant Reloder-10x<<locked>>96%47,761 psi87%3445 fps99.2%
Alliant Reloder-7<<locked>>90%49,371 psi90%3409 fps99.6%
Baschieri & Pellagri 106<<locked>>92%47,369 psi86%3297 fps97.4%
Hodgdon H322<<locked>>96%47,558 psi86%3442 fps96.9%
Hodgdon H335<<locked>>96%49,095 psi89%3458 fps96.2%
Hodgdon H4198<<locked>>88%47,210 psi86%3330 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%30,734 psi56%2218 fps100%
IMR 3031ᴾ<<locked>>100%41,307 psi75%3366 fps96.2%
IMR 4198<<locked>>96%49,545 psi90%3438 fps99.8%
IMR 4227<<locked>>84%47,282 psi86%3340 fps100%
Lovex S053<<locked>>86%48,878 psi89%3343 fps100%
Norma 200<<locked>>92%47,529 psi86%3422 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,414 psi55%2267 fps100%
ReloadSwiss RS 36<<locked>>84%47,079 psi85%3366 fps99.9%
SNPE Vectan BA6 1/2<<locked>>90%49,400 psi90%3182 fps100%
SNPE Vectan SP 3<<locked>>96%49,255 psi89%3455 fps98%
Somchem S335ᴾ<<locked>>100%44,657 psi81%3291 fps96.1%
Vihtavuori N120<<locked>>90%47,674 psi87%3366 fps100%
Vihtavuori N130<<locked>>98%48,979 psi89%3386 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%45,034 psi82%3307 fps97.8%
Vihtavuori N135ᴾ<<locked>>100%36,898 psi67%3215 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,146 psi71%3140 fps97.5%
Accurate 2015<<locked>>92%36,230 psi66%3153 fps95.6%
Accurate 2460<<locked>>96%46,151 psi84%3369 fps95.2%
Accurate LT-30<<locked>>86%40,277 psi73%3156 fps95.1%
ADI AR 2207<<locked>>80%34,026 psi62%3120 fps99.2%
ADI AR 2219<<locked>>90%43,163 psi78%3350 fps95.7%
Alliant AR-Comp<<locked>>88%29,109 psi53%3022 fps95.2%
Alliant Reloder-10x22.6 gr84%32,285 psi59%3077 fps95.3%
Alliant Reloder-7<<locked>>80%35,404 psi64%3104 fps97%
Baschieri & Pellagri 106<<locked>>86%38,841 psi70%3120 fps95.1%
Hodgdon H32226.2 gr92%41,669 psi76%3317 fps95.2%
Hodgdon H335<<locked>>94%45,774 psi83%3389 fps95.3%
Hodgdon H4198<<locked>>86%44,541 psi81%3274 fps95.6%
Hodgdon TrailBoss<<locked>>80%22,437 psi41%1995 fps100%
IMR 3031<<locked>>98%38,899 psi71%3310 fps95.3%
IMR 4198<<locked>>80%30,400 psi55%2976 fps95.4%
IMR 4227<<locked>>80%41,336 psi75%3219 fps99.5%
Lovex S053<<locked>>80%40,393 psi73%3182 fps100%
Norma 200<<locked>>80%31,865 psi58%3051 fps96.1%
ReloadSwiss RS 14<<locked>>80%21,930 psi40%2031 fps100%
ReloadSwiss RS 36<<locked>>80%41,321 psi75%3248 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%37,550 psi68%2979 fps100%
SNPE Vectan SP 323.7 gr88%37,710 psi68%3202 fps95%
Somchem S335<<locked>>98%41,669 psi76%3228 fps95.2%
Vihtavuori N120<<locked>>80%34,214 psi62%3087 fps99.8%
Vihtavuori N130<<locked>>86%33,475 psi61%3041 fps95.5%
Vihtavuori N133<<locked>>94%37,202 psi68%3133 fps95.7%
Vihtavuori N135<<locked>>98%34,693 psi63%3156 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for 5.6 x 50 Mag. loaded with the .222 | 45gr | Peregrine VRG-3. ADI AR 2219 delivers the highest muzzle velocity at 3,478 fps; across all powders the maximum-charge window runs from 2,218 fps to 3,478 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (380 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, SNPE Vectan SP 3, Alliant Reloder-10x rank at the top here: for 5.6 x 50 Mag. with the .222 | 45gr | Peregrine VRG-3 they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data