
Load Specifications
Load data in caliber 5.6 x 50 Mag. with .222 | 40gr | Reichenberg HDB Universal bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan SP 3, Alliant Reloder-10x and IMR 4198.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 88% | 49,400 psi | 90% | 3491 fps | 98.6% |
| Accurate 2015ᴾ | <<locked>> | 100% | 44,773 psi | 81% | 3478 fps | 96.9% |
| Accurate LT-30 | <<locked>> | 94% | 49,545 psi | 90% | 3484 fps | 96.3% |
| ADI AR 2207 | <<locked>> | 92% | 47,921 psi | 87% | 3583 fps | 100% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 41,408 psi | 75% | 3504 fps | 98.5% |
| Alliant Reloder-10x | <<locked>> | 98% | 48,559 psi | 88% | 3606 fps | 98.6% |
| Alliant Reloder-7 | <<locked>> | 90% | 47,152 psi | 86% | 3514 fps | 98.7% |
| Baschieri & Pellagri 106 | <<locked>> | 94% | 48,544 psi | 88% | 3451 fps | 96.6% |
| Hodgdon H322 | <<locked>> | 98% | 48,211 psi | 87% | 3593 fps | 95.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,501 psi | 55% | 2339 fps | 100% |
| IMR 4198 | <<locked>> | 96% | 47,152 psi | 86% | 3540 fps | 99% |
| IMR 4227 | <<locked>> | 86% | 48,080 psi | 87% | 3507 fps | 99.7% |
| Lovex S053 | <<locked>> | 88% | 49,632 psi | 90% | 3517 fps | 100% |
| Norma 200 | <<locked>> | 94% | 48,515 psi | 88% | 3586 fps | 99.1% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,182 psi | 55% | 2388 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 86% | 47,601 psi | 86% | 3527 fps | 99.7% |
| SNPE Vectan BA6 1/2 | <<locked>> | 90% | 47,543 psi | 86% | 3314 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 98% | 49,269 psi | 89% | 3599 fps | 97% |
| Vihtavuori N110 | <<locked>> | 82% | 48,486 psi | 88% | 3435 fps | 100% |
| Vihtavuori N120 | <<locked>> | 92% | 47,964 psi | 87% | 3527 fps | 100% |
| Vihtavuori N130ᴾ | <<locked>> | 100% | 49,806 psi | 90% | 3540 fps | 98.6% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 43,105 psi | 78% | 3399 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 37,565 psi | 68% | 3235 fps | 95.9% |
| Accurate 2015 | <<locked>> | 96% | 39,247 psi | 71% | 3353 fps | 95.3% |
| Accurate LT-30 | <<locked>> | 92% | 46,818 psi | 85% | 3428 fps | 95.7% |
| ADI AR 2207 | <<locked>> | 80% | 32,503 psi | 59% | 3222 fps | 98% |
| Alliant AR-Comp | <<locked>> | 92% | 31,995 psi | 58% | 3235 fps | 95.1% |
| Alliant Reloder-10x | 23.9 gr | 88% | 35,186 psi | 64% | 3294 fps | 95.1% |
| Alliant Reloder-7 | <<locked>> | 80% | 34,069 psi | 62% | 3199 fps | 95.2% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 45,020 psi | 82% | 3383 fps | 95.8% |
| Hodgdon H322 | <<locked>> | 96% | 45,455 psi | 82% | 3533 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,031 psi | 40% | 2096 fps | 100% |
| IMR 4198 | 21.6 gr | 84% | 32,982 psi | 60% | 3186 fps | 95.1% |
| IMR 4227 | <<locked>> | 80% | 39,668 psi | 72% | 3323 fps | 98.6% |
| Lovex S053 | <<locked>> | 80% | 38,870 psi | 71% | 3301 fps | 99.9% |
| Norma 200 | <<locked>> | 82% | 32,967 psi | 60% | 3215 fps | 95.2% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 21,930 psi | 40% | 2149 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 39,552 psi | 72% | 3350 fps | 98.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 36,318 psi | 66% | 3104 fps | 100% |
| SNPE Vectan SP 3 | 25.5 gr | 94% | 43,294 psi | 79% | 3471 fps | 95.4% |
| Vihtavuori N110 | <<locked>> | 80% | 45,585 psi | 83% | 3383 fps | 100% |
| Vihtavuori N120 | <<locked>> | 80% | 32,677 psi | 59% | 3186 fps | 99% |
| Vihtavuori N130 | <<locked>> | 90% | 36,434 psi | 66% | 3248 fps | 95.3% |
| Vihtavuori N133 | <<locked>> | 98% | 40,219 psi | 73% | 3333 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for 5.6 x 50 Mag. loaded with the .222 | 40gr | Reichenberg HDB Universal. Alliant Reloder-10x delivers the highest muzzle velocity at 3,606 fps; across all powders the maximum-charge window runs from 2,339 fps to 3,606 fps. Accurate 2015 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (380 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan SP 3, Alliant Reloder-10x, IMR 4198 rank at the top here: for 5.6 x 50 Mag. with the .222 | 40gr | Reichenberg HDB Universal they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.