top of page

Load data for 458 x 2'' American + .458 | 300gr | CutEdge ESP Raptor

Recommended Powder(s): ADI AR 2205, Accurate 5744, Accurate No. 11 FS, Hodgdon LilGun

458 x 2'' American + .458 | 300gr | CutEdge ESP Raptor

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.458 | 300gr | CutEdge ESP Raptor
Manufacturer SKU:
ESP S300 RAPTOR WoT
Bullet Weight:
300gr | 19.4g
Bullet Diameter:
0.458" | 11.63mm
Bullet Length:
1.103" | 28.0mm
Caliber:
458 x 2'' American load data
Case Length (l3):
2.000" | 50.8mm
Cartridge Length (C.O.L.):
<<locked>>
Seated Depth:
<<locked>>
Shank Seated Depth:
<<locked>>
Case Capacity:
73.0 Grains of Water | 4.74 cm³
Primer Size:
Large Rifle Magnum (LRM)
Max. allowed Pressure:
59988 psi | 4136 bar
LID:
LID_B8623_C792
Last updated:
2026-05-28

Load data for 38 loads in caliber 458 x 2'' American with .458 | 300gr | CutEdge ESP Raptor bullet and 19 powders such as ADI AR 2205, Accurate 5744, Accurate No. 11 FS, Hodgdon LilGun. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI APS 450
83%
89%
100%
ADI AR 2205
97%
89%
100%
ADI AR 2207
97%
51%
95%
Accurate 1680
97%
65%
93%
Accurate 5744
91%
89%
98%
Accurate No. 11 FS
94%
89%
100%
Alliant Reloder-7
97%
55%
92%
Hodgdon LilGun
91%
89%
100%
IMR 4227
97%
69%
97%
Lovex D060
97%
88%
98%
Lovex D063
93%
90%
98%
Lovex S040
89%
88%
100%
Lovex S053
97%
65%
99%
ReloadSwiss RS 36
97%
66%
96%
SNPE Vectan BA6 1/2
96%
59%
100%
Shooters World Blackout
93%
90%
98%
Shooters World Buffalo Rifle
97%
88%
98%
Vihtavuori N110
96%
77%
100%
Vihtavuori N120
97%
52%
97%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI APS 450
<<locked>>
81%
50981
85%
***
100%
ADI AR 2205
<<locked>>
81%
32808
55%
***
98%
[ADI AR 2207]*
<<locked>>
85%
21669
36%
***
90%
[Accurate 1680]*
<<locked>>
91%
31299
52%
***
90%
Accurate 5744
<<locked>>
81%
39334
66%
***
95%
Accurate No. 11 FS
<<locked>>
81%
34142
57%
***
97%
[Alliant Reloder-7]*
<<locked>>
93%
28819
48%
***
90%
Hodgdon LilGun
<<locked>>
81%
38247
64%
***
100%
[IMR 4227]*
<<locked>>
81%
25875
43%
***
91%
[Lovex D060]*
<<locked>>
81%
33373
56%
***
92%
[Lovex D063]*
<<locked>>
81%
35766
60%
***
93%
Lovex S040
<<locked>>
81%
41278
69%
***
100%
Lovex S053
<<locked>>
81%
24468
41%
***
95%
[ReloadSwiss RS 36]*
<<locked>>
81%
24352
41%
***
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
23540
39%
***
100%
[Shooters World Blackout]*
<<locked>>
81%
35766
60%
***
93%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
33373
56%
***
92%
Vihtavuori N110
<<locked>>
81%
28979
48%
***
100%
[Vihtavuori N120]*
<<locked>>
81%
19754
33%
***
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page