Load data for .458 x 2'' American + .458 | 260gr | CutEdge HG

.458 x 2'' American cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:260 gr
Bullet Diameter:0.458"
Bullet Length:<<locked>>
Case Length (l3):2"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:73 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:59,988 psi

Load data in caliber .458 x 2'' American with .458 | 260gr | CutEdge HG bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Accurate No. 11 FS and Lovex S040.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FSᴾ<<locked>>100%54,259 psi90%2464 fps98.7%
ADI APS 450<<locked>>86%54,056 psi90%1801 fps100%
ADI AR 2205ᴾ<<locked>>100%50,589 psi84%2343 fps99.4%
Hodgdon LilGun<<locked>>96%52,910 psi88%2526 fps100%
Hodgdon TrailBossᴾ<<locked>>100%24,453 psi41%1378 fps100%
Lovex S040<<locked>>94%52,373 psi87%2372 fps100%
Lovex S053ᴾ<<locked>>100%35,665 psi59%2221 fps97.2%
ReloadSwiss RS 14ᴾ<<locked>>100%23,438 psi39%1411 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%33,417 psi56%2110 fps100%
Vihtavuori N110ᴾ<<locked>>100%42,786 psi71%2306 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS41.1 gr88%36,448 psi61%2208 fps95.3%
ADI APS 450<<locked>>80%48,486 psi81%1736 fps100%
ADI AR 2205<<locked>>82%29,254 psi49%1991 fps95%
Hodgdon LilGun37.6 gr80%30,066 psi50%2195 fps99.9%
Hodgdon TrailBoss<<locked>>80%17,651 psi29%1230 fps100%
Lovex S04032.2 gr80%34,418 psi57%2110 fps99.7%
Lovex S053<<locked>>94%30,110 psi50%2113 fps95.5%
ReloadSwiss RS 14<<locked>>80%16,868 psi28%1257 fps100%
SNPE Vectan BA6 1/2<<locked>>80%19,609 psi33%1788 fps97.9%
Vihtavuori N110<<locked>>80%23,685 psi39%1949 fps98.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 10 powders for .458 x 2'' American loaded with the .458 | 260gr | CutEdge HG. Hodgdon LilGun delivers the highest muzzle velocity at 2,526 fps; across all powders the maximum-charge window runs from 1,378 fps to 2,526 fps. Accurate No. 11 FS gives the best case fill at 100 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (414 MPa), the top charges use 39–90 %, leaving at least 10 % headroom. Accurate No. 11 FS, ADI AR 2205, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Accurate No. 11 FS, Lovex S040 rank at the top here: for .458 x 2'' American with the .458 | 260gr | CutEdge HG they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data