Load data for 30-30 Ackley Improved + .308 | 130gr | Ferrobull Entox Sport

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 130gr \| Ferrobull Entox Sport
Manufacturer SKU:	S-30-130
Bullet Weight:	130gr \| 8.4g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.071" \| 27.2mm
Caliber:	30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.589" \| 15.0mm
Shank Seated Depth:	0.589" \| 15.0mm
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B9082_C330
Last updated:	2025-12-08

Load data for 70 loads in caliber 30-30 Ackley Improved with .308 | 130gr | Ferrobull Entox Sport bullet and 35 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	41452	89%	**87	100%
ADI AR 2219	<<locked>>	91%	41597	90%	**16	96%
Accurate 2015	<<locked>>	96%	40074	86%	**74	98%
[Accurate 2460]*	<<locked>>	95%	41017	88%	**80	93%
Accurate 2495	<<locked>>	97%	31705	68%	**08	96%
[Accurate 2520]*	<<locked>>	97%	35636	77%	**31	92%
Alliant AR-Comp 👍	<<locked>>	97%	36376	78%	**74	99%
Alliant Reloder-10x 👍	<<locked>>	93%	40553	87%	**03	99%
Alliant Reloder-7	<<locked>>	86%	41002	88%	**44	99%
Baschieri & Pellagri 106	<<locked>>	90%	41147	89%	**15	97%
[Hodgdon Benchmark]*	<<locked>>	96%	41205	89%	**34	92%
[Hodgdon CFE BLK]*	<<locked>>	86%	41553	90%	**98	92%
Hodgdon H322	<<locked>>	97%	41118	89%	**10	96%
Hodgdon H335	<<locked>>	92%	41524	89%	**13	95%
Hodgdon H4198	<<locked>>	87%	41423	89%	**08	96%
[IMR 3031]*	<<locked>>	96%	30951	67%	**46	93%
IMR 4198 👍	<<locked>>	92%	41771	90%	**70	99%
[Lovex D073.4]*	<<locked>>	94%	41742	90%	**84	93%
[Lovex D073.5]*	<<locked>>	95%	41017	88%	**80	93%
Norma 200 👍	<<locked>>	89%	40944	88%	**93	99%
[Norma 202]*	<<locked>>	97%	34969	75%	**95	93%
[ReloadSwiss RS 40]*	<<locked>>	94%	41147	89%	**84	94%
[Rottweil R 901]*	<<locked>>	97%	38856	84%	**44	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	41133	89%	**60	100%
SNPE Vectan SP 10	<<locked>>	91%	41452	89%	**13	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	38145	82%	**69	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30850	66%	**24	92%
[Somchem S321]*	<<locked>>	96%	40799	88%	**97	92%
Somchem S335	<<locked>>	97%	37173	80%	**79	95%
Vihtavuori N120	<<locked>>	90%	41249	89%	**44	100%
Vihtavuori N130	<<locked>>	95%	41263	89%	**51	99%
Vihtavuori N133	<<locked>>	97%	34925	75%	**36	96%
[Vihtavuori N140]*	<<locked>>	96%	32895	71%	**23	92%
[Vihtavuori N530]*	<<locked>>	96%	40828	88%	**87	92%
[Winchester 748]*	<<locked>>	97%	40988	88%	**13	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33576	72%	**49	100%
[ADI AR 2219]*	<<locked>>	81%	29530	64%	**60	91%
[Accurate 2015]*	<<locked>>	81%	24816	53%	**39	92%
[Accurate 2460]*	<<locked>>	90%	34418	74%	**62	91%
[Accurate 2495]*	<<locked>>	86%	21886	47%	**46	90%
[Accurate 2520]*	<<locked>>	94%	31444	68%	**46	90%
[Alliant AR-Comp]*	<<locked>>	81%	22495	48%	**96	92%
Alliant Reloder-10x	<<locked>>	81%	27630	60%	**24	95%
Alliant Reloder-7	<<locked>>	81%	35433	76%	**43	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30806	66%	**08	93%
[Hodgdon Benchmark]*	<<locked>>	91%	35868	77%	**33	90%
[Hodgdon CFE BLK]*	<<locked>>	84%	38174	82%	**36	90%
[Hodgdon H322]*	<<locked>>	84%	27456	59%	**05	90%
[Hodgdon H335]*	<<locked>>	82%	29776	64%	**64	90%
[Hodgdon H4198]*	<<locked>>	81%	33750	73%	**60	93%
[IMR 3031]*	<<locked>>	91%	26353	57%	**21	90%
IMR 4198	<<locked>>	81%	30545	66%	**44	97%
[Lovex D073.4]*	<<locked>>	88%	33678	73%	**33	90%
[Lovex D073.5]*	<<locked>>	90%	34418	74%	**62	91%
Norma 200	<<locked>>	81%	31430	68%	**06	97%
[Norma 202]*	<<locked>>	91%	29501	64%	**70	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	32779	71%	**16	90%
[Rottweil R 901]*	<<locked>>	88%	30139	65%	**57	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37579	81%	**08	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29704	64%	**67	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	29182	63%	**85	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	27644	60%	**46	90%
[Somchem S321]*	<<locked>>	92%	36347	78%	**11	90%
[Somchem S335]*	<<locked>>	87%	27209	59%	**59	90%
Vihtavuori N120	<<locked>>	81%	31546	68%	**70	100%
[Vihtavuori N130]*	<<locked>>	81%	26629	57%	**46	94%
[Vihtavuori N133]*	<<locked>>	83%	23409	50%	**51	90%
[Vihtavuori N140]*	<<locked>>	93%	29312	63%	**38	90%
[Vihtavuori N530]*	<<locked>>	94%	37347	80%	**18	90%
[Winchester 748]*	<<locked>>	92%	35766	77%	**11	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data