Load data for 30-30 Ackley Improved + .308 | 130gr | CutEdge ESP Raptor

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 130gr \| CutEdge ESP Raptor
Manufacturer SKU:	ESP C130 RAPTOR WoT
Bullet Weight:	130gr \| 8.4g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B8471_C330
Last updated:	2026-01-31

Load data for 72 loads in caliber 30-30 Ackley Improved with .308 | 130gr | CutEdge ESP Raptor bullet and 36 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	40785	88%	**97	100%
ADI AR 2219	<<locked>>	91%	41510	89%	**36	97%
Accurate 2015	<<locked>>	97%	40422	87%	**00	98%
[Accurate 2460]*	<<locked>>	95%	40640	88%	**90	93%
Accurate 2495	<<locked>>	96%	30734	66%	**05	96%
[Accurate 2520]*	<<locked>>	97%	34867	75%	**34	92%
Alliant AR-Comp 👍	<<locked>>	97%	35679	77%	**77	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41060	88%	**26	99%
Alliant Reloder-7	<<locked>>	87%	41249	89%	**64	99%
Baschieri & Pellagri 106	<<locked>>	90%	41017	88%	**25	97%
[Hodgdon Benchmark]*	<<locked>>	96%	41742	90%	**61	93%
[Hodgdon CFE BLK]*	<<locked>>	86%	40857	88%	**02	92%
Hodgdon H322	<<locked>>	96%	40379	87%	**13	96%
Hodgdon H335	<<locked>>	92%	41684	90%	**36	95%
Hodgdon H4198	<<locked>>	87%	40901	88%	**18	96%
[IMR 3031]*	<<locked>>	96%	30269	65%	**49	93%
IMR 4198 👍	<<locked>>	92%	41423	89%	**80	100%
[Lovex D073.4]*	<<locked>>	94%	41756	90%	**97	93%
[Lovex D073.5]*	<<locked>>	96%	41162	89%	**03	93%
Norma 200 👍	<<locked>>	90%	41292	89%	**16	100%
[Norma 202]*	<<locked>>	96%	34069	73%	**95	93%
[ReloadSwiss RS 40]*	<<locked>>	95%	41481	89%	**10	94%
[Rottweil R 901]*	<<locked>>	97%	37681	81%	**41	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	40712	88%	**70	100%
SNPE Vectan SP 10	<<locked>>	91%	40857	88%	**20	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	38624	83%	**95	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	31024	67%	**44	93%
[Somchem S321]*	<<locked>>	97%	41539	90%	**30	93%
Somchem S335	<<locked>>	96%	36245	78%	**79	95%
Vihtavuori N120	<<locked>>	90%	40770	88%	**51	100%
Vihtavuori N130 👍	<<locked>>	96%	41655	90%	**74	99%
Vihtavuori N133	<<locked>>	96%	34258	74%	**43	96%
[Vihtavuori N140]*	<<locked>>	96%	32053	69%	**23	92%
[Vihtavuori N530]*	<<locked>>	97%	41336	89%	**10	92%
[Vihtavuori N540]*	<<locked>>	97%	32372	70%	**49	92%
[Winchester 748]*	<<locked>>	97%	40973	88%	**30	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33011	71%	**52	100%
[ADI AR 2219]*	<<locked>>	81%	29298	63%	**74	92%
[Accurate 2015]*	<<locked>>	81%	24134	52%	**39	92%
[Accurate 2460]*	<<locked>>	89%	32924	71%	**46	90%
[Accurate 2495]*	<<locked>>	87%	21335	46%	**52	90%
[Accurate 2520]*	<<locked>>	94%	31053	67%	**52	90%
[Alliant AR-Comp]*	<<locked>>	81%	21828	47%	**96	92%
Alliant Reloder-10x	<<locked>>	81%	26934	58%	**28	95%
Alliant Reloder-7	<<locked>>	81%	34693	75%	**46	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30458	66%	**18	93%
[Hodgdon Benchmark]*	<<locked>>	90%	34200	74%	**16	90%
[Hodgdon CFE BLK]*	<<locked>>	84%	37579	81%	**39	90%
[Hodgdon H322]*	<<locked>>	84%	26934	58%	**08	90%
[Hodgdon H335]*	<<locked>>	82%	29849	64%	**83	90%
[Hodgdon H4198]*	<<locked>>	81%	33460	72%	**74	93%
[IMR 3031]*	<<locked>>	91%	25556	55%	**11	90%
IMR 4198	<<locked>>	81%	30066	65%	**51	97%
[Lovex D073.4]*	<<locked>>	88%	32793	71%	**33	90%
[Lovex D073.5]*	<<locked>>	90%	33388	72%	**56	90%
Norma 200	<<locked>>	81%	30545	66%	**06	97%
[Norma 202]*	<<locked>>	91%	28689	62%	**70	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	32111	69%	**20	90%
[Rottweil R 901]*	<<locked>>	88%	29095	63%	**51	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37434	81%	**21	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29153	63%	**67	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	28558	62%	**85	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	26890	58%	**42	90%
[Somchem S321]*	<<locked>>	92%	35056	76%	**98	90%
[Somchem S335]*	<<locked>>	87%	26426	57%	**56	90%
Vihtavuori N120	<<locked>>	81%	31038	67%	**77	100%
[Vihtavuori N130]*	<<locked>>	81%	26107	56%	**49	94%
[Vihtavuori N133]*	<<locked>>	83%	23032	50%	**54	90%
[Vihtavuori N140]*	<<locked>>	93%	28631	62%	**38	90%
[Vihtavuori N530]*	<<locked>>	92%	35723	77%	**02	90%
[Vihtavuori N540]*	<<locked>>	94%	29689	64%	**87	90%
[Winchester 748]*	<<locked>>	93%	35491	76%	**18	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data