Load data for 30-30 Ackley Improved + .308 | 125gr | Remington PSP

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 125gr \| Remington PSP
Bullet Weight:	125gr \| 8.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.000" \| 25.4mm
Caliber:	30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.518" \| 13.2mm
Shank Seated Depth:	0.518" \| 13.2mm
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B5164_C330
Last updated:	2025-12-08

Load data for 68 loads in caliber 30-30 Ackley Improved with .308 | 125gr | Remington PSP bullet and 34 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	41365	89%	**46	100%
ADI AR 2219	<<locked>>	91%	41597	90%	**75	96%
Accurate 2015	<<locked>>	96%	40756	88%	**46	98%
[Accurate 2460]*	<<locked>>	95%	41713	90%	**52	93%
Accurate 2495	<<locked>>	97%	32460	70%	**74	96%
[Accurate 2520]*	<<locked>>	96%	35128	76%	**77	92%
Alliant AR-Comp 👍	<<locked>>	96%	35998	78%	**23	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41263	89%	**72	99%
Alliant Reloder-7	<<locked>>	86%	40625	88%	**00	99%
Baschieri & Pellagri 106	<<locked>>	90%	40973	88%	**67	97%
[Hodgdon Benchmark]*	<<locked>>	95%	40596	87%	**80	92%
Hodgdon H322	<<locked>>	97%	41597	90%	**75	96%
Hodgdon H335	<<locked>>	91%	41176	89%	**69	95%
Hodgdon H4198	<<locked>>	87%	40683	88%	**54	95%
[IMR 3031]*	<<locked>>	97%	31720	68%	**18	93%
IMR 4198 👍	<<locked>>	92%	41640	90%	**30	99%
[Lovex D073.4]*	<<locked>>	93%	40799	88%	**20	93%
[Lovex D073.5]*	<<locked>>	96%	41713	90%	**52	93%
Norma 200 👍	<<locked>>	89%	40669	88%	**43	99%
[Norma 202]*	<<locked>>	97%	35128	76%	**54	93%
[ReloadSwiss RS 40]*	<<locked>>	94%	41060	88%	**46	94%
[Rottweil R 901]*	<<locked>>	97%	39001	84%	**03	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	40785	88%	**16	100%
SNPE Vectan SP 10	<<locked>>	91%	41495	89%	**75	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	38769	84%	**41	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	31183	67%	**83	92%
[Somchem S321]*	<<locked>>	96%	41350	89%	**66	92%
Somchem S335	<<locked>>	97%	37594	81%	**41	95%
Vihtavuori N120	<<locked>>	90%	40959	88%	**00	100%
Vihtavuori N130	<<locked>>	95%	40915	88%	**07	99%
Vihtavuori N133	<<locked>>	97%	35462	76%	**02	96%
[Vihtavuori N140]*	<<locked>>	97%	33243	72%	**82	92%
[Vihtavuori N530]*	<<locked>>	96%	41336	89%	**52	92%
[Winchester 748]*	<<locked>>	96%	40611	88%	**66	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33678	73%	**05	100%
[ADI AR 2219]*	<<locked>>	81%	29907	64%	**20	91%
[Accurate 2015]*	<<locked>>	81%	24961	54%	**95	92%
[Accurate 2460]*	<<locked>>	90%	34447	74%	**15	90%
[Accurate 2495]*	<<locked>>	86%	22292	48%	**08	90%
[Accurate 2520]*	<<locked>>	94%	32401	70%	**15	90%
[Alliant AR-Comp]*	<<locked>>	81%	22437	48%	**46	92%
Alliant Reloder-10x	<<locked>>	81%	27688	60%	**83	95%
Alliant Reloder-7	<<locked>>	81%	35375	76%	**02	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30835	66%	**60	93%
[Hodgdon Benchmark]*	<<locked>>	91%	35549	77%	**79	90%
[Hodgdon H322]*	<<locked>>	84%	28282	61%	**80	90%
[Hodgdon H335]*	<<locked>>	83%	30545	66%	**39	90%
[Hodgdon H4198]*	<<locked>>	81%	34432	74%	**29	93%
[IMR 3031]*	<<locked>>	91%	26832	58%	**83	90%
IMR 4198	<<locked>>	81%	30632	66%	**03	97%
[Lovex D073.4]*	<<locked>>	88%	34360	74%	**98	90%
[Lovex D073.5]*	<<locked>>	90%	34447	74%	**15	90%
Norma 200	<<locked>>	81%	31662	68%	**62	97%
[Norma 202]*	<<locked>>	92%	29921	64%	**36	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	32895	71%	**75	90%
[Rottweil R 901]*	<<locked>>	88%	30400	65%	**16	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37420	81%	**64	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29921	64%	**23	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	29863	64%	**51	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	93%	28137	61%	**08	90%
[Somchem S321]*	<<locked>>	92%	36042	78%	**61	90%
[Somchem S335]*	<<locked>>	86%	26992	58%	**08	90%
Vihtavuori N120	<<locked>>	81%	31749	68%	**29	100%
[Vihtavuori N130]*	<<locked>>	81%	26861	58%	**01	94%
[Vihtavuori N133]*	<<locked>>	84%	24279	52%	**19	90%
[Vihtavuori N140]*	<<locked>>	92%	29109	63%	**83	90%
[Vihtavuori N530]*	<<locked>>	94%	37985	82%	**90	90%
[Winchester 748]*	<<locked>>	93%	36622	79%	**84	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data