Load data for 10.3 x 60 R Swiss + .416 | 300gr | Barnes X S

10.3 x 60 R Swiss cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:300 gr
Bullet Diameter:0.416"
Bullet Length:<<locked>>
Case Length (l3):2.392"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:91 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:23.62"
Max. allowed Pressure:39,160 psi
Recommended Twist Rate:1:21.0

Load data in caliber 10.3 x 60 R Swiss with .416 | 300gr | Barnes X S bullet and 14 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Accurate 2495 and Vihtavuori N135.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>82%33,504 psi86%2119 fps98.3%
Accurate 2495<<locked>>92%35,418 psi90%2231 fps99.1%
Accurate 4064<<locked>>94%35,317 psi90%2244 fps96.9%
Alliant AR-Comp<<locked>>86%34,214 psi87%2215 fps99.9%
Hodgdon TrailBossᴾ<<locked>>100%33,286 psi85%1437 fps100%
IMR 3031<<locked>>88%34,737 psi89%2234 fps98%
Norma 202<<locked>>88%35,273 psi90%2198 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%33,344 psi85%1473 fps100%
SNPE Vectan Tubal 3000<<locked>>84%34,055 psi87%2087 fps95.6%
SNPE Vectan Tubal 5000<<locked>>92%34,635 psi88%2123 fps97%
Somchem S335<<locked>>86%35,346 psi90%2136 fps97.1%
Vihtavuori N133<<locked>>84%33,576 psi86%2100 fps98.2%
Vihtavuori N135<<locked>>90%33,794 psi86%2185 fps98.6%
Vihtavuori N140<<locked>>88%33,446 psi85%2139 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%31,560 psi81%2077 fps97.8%
Accurate 249549.8 gr80%25,092 psi64%1991 fps95.9%
Accurate 4064<<locked>>90%31,488 psi80%2162 fps95.6%
Alliant AR-Comp<<locked>>80%28,834 psi74%2090 fps99.1%
Hodgdon TrailBoss<<locked>>80%24,772 psi63%1283 fps100%
IMR 303149.1 gr80%27,673 psi71%2060 fps95.2%
Norma 202<<locked>>86%33,330 psi85%2159 fps95.6%
ReloadSwiss RS 14<<locked>>80%24,976 psi64%1319 fps100%
SNPE Vectan Tubal 3000<<locked>>82%32,285 psi82%2047 fps95%
SNPE Vectan Tubal 5000<<locked>>86%29,399 psi75%2008 fps95%
Somchem S335<<locked>>80%29,994 psi77%2021 fps95.2%
Vihtavuori N133<<locked>>80%30,037 psi77%2021 fps97.1%
Vihtavuori N13548.1 gr80%25,657 psi66%1985 fps95.7%
Vihtavuori N140<<locked>>86%31,720 psi81%2103 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 40 powders for 10.3 x 60 R Swiss loaded with the .416 | 300gr | Barnes X S. Accurate 4064 delivers the highest muzzle velocity at 2,244 fps; across all powders the maximum-charge window runs from 1,437 fps to 2,244 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 40 of the 40 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (270 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 300.0 gr projectile in 0.416" calls for a 1:21.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Accurate 2495, Vihtavuori N135 rank at the top here: for 10.3 x 60 R Swiss with the .416 | 300gr | Barnes X S they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, ADI Benchmark 8208, Alliant Reloder- TS 15.5, Bofors RP3 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data