Load data for 10.3 x 60 R Swiss + .414 | 215gr | AERO SB,- smax:11.40

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.414 \| 215gr \| AERO SB,- smax:11.40
Bullet Weight:	215gr \| 13.9g
Bullet Diameter:	0.414" \| 10.52mm
Bullet Length:	1.039" \| 26.4mm
Caliber:	10.3 x 60 R Swiss load data
Case Length (l3):	2.392" \| 60.8mm
Cartridge Length (C.O.L.):	3.059" \| 77.7mm
Seated Depth:	0.372" \| 9.4mm
Shank Seated Depth:	0.372" \| 9.4mm
Case Capacity:	91.0 Grains of Water \| 5.91 cm³
Primer Size:	Large Rifle Magnum (LRM)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B125_C1295
Last updated:	2025-01-01

Load data for 46 loads in caliber 10.3 x 60 R Swiss with .414 | 215gr | AERO SB,- smax:11.40 bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	86%	35085	90%	**48	94%
Accurate 2015	<<locked>>	92%	34679	89%	**28	96%
Accurate 2495	<<locked>>	97%	31488	80%	**51	95%
Alliant AR-Comp	<<locked>>	96%	34896	89%	**00	98%
Alliant Reloder-10x	<<locked>>	89%	35201	90%	**57	97%
[Baschieri & Pellagri 106]*	<<locked>>	85%	34925	89%	**46	94%
[Hodgdon H322]*	<<locked>>	92%	35085	90%	**48	94%
[Hodgdon H335]*	<<locked>>	87%	35172	90%	**44	92%
Hodgdon TrailBoss	<<locked>>	96%	29240	75%	**19	100%
[IMR 3031]*	<<locked>>	97%	30995	79%	**95	92%
IMR 4198	<<locked>>	86%	34882	89%	**95	98%
Norma 200	<<locked>>	85%	35172	90%	**38	98%
[Norma 202]*	<<locked>>	97%	34795	89%	**48	92%
ReloadSwiss RS 14	<<locked>>	96%	28645	73%	**55	100%
[Rottweil R 901]*	<<locked>>	94%	34940	89%	**21	92%
[SNPE Vectan SP 10]*	<<locked>>	86%	34882	89%	**44	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	94%	35215	90%	**59	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	31241	80%	**70	92%
[Somchem S335]*	<<locked>>	95%	34998	89%	**92	94%
Vihtavuori N120	<<locked>>	85%	35172	90%	**89	100%
Vihtavuori N130	<<locked>>	90%	35128	90%	**92	97%
Vihtavuori N133	<<locked>>	97%	35114	90%	**95	96%
[Vihtavuori N140]*	<<locked>>	97%	32895	84%	**75	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	29704	76%	**00	91%
[Accurate 2015]*	<<locked>>	81%	24366	62%	**46	91%
[Accurate 2495]*	<<locked>>	88%	22902	58%	**05	90%
[Alliant AR-Comp]*	<<locked>>	81%	22060	56%	**00	91%
[Alliant Reloder-10x]*	<<locked>>	81%	27586	70%	**57	94%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30748	79%	**44	93%
[Hodgdon H322]*	<<locked>>	85%	28964	74%	**80	90%
[Hodgdon H335]*	<<locked>>	83%	31212	80%	**49	90%
Hodgdon TrailBoss	<<locked>>	89%	26034	66%	**50	100%
[IMR 3031]*	<<locked>>	93%	27456	70%	**90	90%
IMR 4198	<<locked>>	81%	30182	77%	**74	96%
Norma 200	<<locked>>	81%	31024	79%	**43	97%
[Norma 202]*	<<locked>>	93%	30647	78%	**43	90%
ReloadSwiss RS 14	<<locked>>	85%	23975	61%	**47	100%
[Rottweil R 901]*	<<locked>>	89%	30777	79%	**13	90%
[SNPE Vectan SP 10]*	<<locked>>	83%	31227	80%	**49	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	30458	78%	**51	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	94%	28442	73%	**98	90%
[Somchem S335]*	<<locked>>	88%	28079	72%	**08	90%
Vihtavuori N120	<<locked>>	81%	31140	80%	**00	100%
[Vihtavuori N130]*	<<locked>>	81%	26397	67%	**59	93%
[Vihtavuori N133]*	<<locked>>	84%	24250	62%	**90	90%
[Vihtavuori N140]*	<<locked>>	94%	30269	77%	**03	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data