Load data for 10.3 x 60 R Swiss + .413 | 231gr | Reichenberg Solid

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.413 \| 231gr \| Reichenberg Solid
Bullet Weight:	231gr \| 15.0g
Bullet Diameter:	0.413" \| 10.49mm
Bullet Length:	0.888" \| 22.6mm
Caliber:	10.3 x 60 R Swiss load data
Case Length (l3):	2.392" \| 60.8mm
Cartridge Length (C.O.L.):	3.059" \| 77.7mm
Seated Depth:	0.221" \| 5.6mm
Shank Seated Depth:	0.138" \| 3.5mm
Case Capacity:	91.0 Grains of Water \| 5.91 cm³
Primer Size:	Large Rifle Magnum (LRM)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B10204_C1295
Last updated:	2025-02-02
Recommended Twist Rate:	1:31 - 1:26

Load data for 54 loads in caliber 10.3 x 60 R Swiss with .413 | 231gr | Reichenberg Solid bullet and 27 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	86%	34780	89%	**62	98%
[Accurate 2460]*	<<locked>>	85%	34838	89%	**66	92%
Accurate 2495	<<locked>>	93%	35099	90%	**67	98%
[Accurate 2520]*	<<locked>>	91%	34925	89%	**28	93%
[Accurate 4064]*	<<locked>>	97%	33127	85%	**05	94%
Alliant AR-Comp 👍	<<locked>>	90%	35157	90%	**57	99%
[Hodgdon Benchmark]*	<<locked>>	85%	34954	89%	**10	91%
Hodgdon H322	<<locked>>	86%	35128	90%	**92	95%
Hodgdon TrailBoss	<<locked>>	97%	30705	78%	**06	100%
IMR 3031	<<locked>>	95%	34751	89%	**51	96%
[Lovex D073.4]*	<<locked>>	84%	34940	89%	**52	92%
[Lovex D073.5]*	<<locked>>	85%	35056	90%	**75	92%
[Lovex D073.6]*	<<locked>>	93%	34925	89%	**28	93%
[Norma 202]*	<<locked>>	91%	34983	89%	**95	94%
ReloadSwiss RS 14	<<locked>>	96%	30298	77%	**39	100%
[ReloadSwiss RS 40]*	<<locked>>	84%	34853	89%	**59	93%
[Rottweil R 901]*	<<locked>>	88%	34983	89%	**59	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	35114	90%	**03	94%
SNPE Vectan Tubal 5000	<<locked>>	96%	35215	90%	**26	95%
[Shooters World Match Rifle]*	<<locked>>	93%	34925	89%	**28	93%
Somchem S335	<<locked>>	89%	34853	89%	**26	95%
Vihtavuori N130	<<locked>>	85%	34983	89%	**20	98%
Vihtavuori N133	<<locked>>	91%	35201	90%	**36	97%
Vihtavuori N135	<<locked>>	97%	31038	79%	**10	95%
Vihtavuori N140	<<locked>>	93%	35056	90%	**75	95%
[Vihtavuori N540]*	<<locked>>	94%	34969	89%	**98	94%
[Winchester 748]*	<<locked>>	87%	35027	89%	**05	91%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	29820	76%	**41	96%
[Accurate 2460]*	<<locked>>	82%	31024	79%	**74	90%
[Accurate 2495]*	<<locked>>	81%	23424	60%	**46	92%
[Accurate 2520]*	<<locked>>	85%	28848	74%	**64	90%
[Accurate 4064]*	<<locked>>	89%	25454	65%	**92	90%
Alliant AR-Comp	<<locked>>	81%	26121	67%	**98	96%
[Hodgdon Benchmark]*	<<locked>>	83%	32097	82%	**38	90%
[Hodgdon H322]*	<<locked>>	81%	29631	76%	**51	93%
Hodgdon TrailBoss	<<locked>>	90%	27630	71%	**40	100%
[IMR 3031]*	<<locked>>	83%	24265	62%	**29	90%
[Lovex D073.4]*	<<locked>>	81%	31778	81%	**77	90%
[Lovex D073.5]*	<<locked>>	82%	30821	79%	**64	90%
[Lovex D073.6]*	<<locked>>	87%	28848	74%	**64	90%
[Norma 202]*	<<locked>>	83%	26963	69%	**82	90%
ReloadSwiss RS 14	<<locked>>	87%	26339	67%	**54	100%
[ReloadSwiss RS 40]*	<<locked>>	81%	31517	80%	**74	91%
[Rottweil R 901]*	<<locked>>	81%	28587	73%	**85	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	81%	27775	71%	**16	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	84%	25063	64%	**47	90%
[Shooters World Match Rifle]*	<<locked>>	87%	28848	74%	**64	90%
[Somchem S335]*	<<locked>>	81%	27093	69%	**23	92%
Vihtavuori N130	<<locked>>	81%	31154	80%	**28	97%
[Vihtavuori N133]*	<<locked>>	81%	25730	66%	**87	93%
[Vihtavuori N135]*	<<locked>>	86%	22568	58%	**44	90%
[Vihtavuori N140]*	<<locked>>	84%	26658	68%	**43	90%
[Vihtavuori N540]*	<<locked>>	86%	27673	71%	**98	90%
[Winchester 748]*	<<locked>>	85%	32430	83%	**39	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.