Load data for 10.3 x 60 R Swiss + .413 | 200gr | Reichenberg HDB Universal

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.413 \| 200gr \| Reichenberg HDB Universal
Bullet Weight:	200gr \| 13.0g
Bullet Diameter:	0.413" \| 10.49mm
Bullet Length:	0.816" \| 20.7mm
Caliber:	10.3 x 60 R Swiss load data
Case Length (l3):	2.392" \| 60.8mm
Cartridge Length (C.O.L.):	3.059" \| 77.7mm
Seated Depth:	0.149" \| 3.8mm
Shank Seated Depth:	0.066" \| 1.7mm
Case Capacity:	91.0 Grains of Water \| 5.91 cm³
Primer Size:	Large Rifle Magnum (LRM)
Max. allowed Pressure:	39160 psi \| 2700 bar
LID:	LID_B10199_C1295
Last updated:	2025-02-02
Recommended Twist Rate:	1:32 - 1:27

Load data for 44 loads in caliber 10.3 x 60 R Swiss with .413 | 200gr | Reichenberg HDB Universal bullet and 22 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	84%	35201	90%	**76	93%
Accurate 2015	<<locked>>	89%	34853	89%	**46	96%
Accurate 2495	<<locked>>	96%	34824	89%	**58	96%
Alliant AR-Comp	<<locked>>	93%	34693	89%	**25	98%
Alliant Reloder-10x	<<locked>>	86%	35027	89%	**72	97%
[Hodgdon H322]*	<<locked>>	89%	35201	90%	**76	93%
[Hodgdon H335]*	<<locked>>	84%	35070	90%	**66	92%
Hodgdon TrailBoss	<<locked>>	96%	29921	76%	**34	100%
[IMR 3031]*	<<locked>>	97%	33895	87%	**02	94%
IMR 4198	<<locked>>	84%	35172	90%	**23	98%
[Norma 202]*	<<locked>>	94%	35012	89%	**72	92%
ReloadSwiss RS 14	<<locked>>	97%	29878	76%	**80	100%
[Rottweil R 901]*	<<locked>>	91%	35085	90%	**33	92%
[SNPE Vectan SP 10]*	<<locked>>	84%	34911	89%	**66	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	35099	90%	**84	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	33330	85%	**48	93%
[Somchem S335]*	<<locked>>	92%	34722	89%	**97	93%
Vihtavuori N130	<<locked>>	88%	34737	89%	**03	97%
Vihtavuori N133	<<locked>>	94%	34911	89%	**13	96%
[Vihtavuori N135]*	<<locked>>	97%	28108	72%	**92	92%
[Vihtavuori N140]*	<<locked>>	96%	35230	90%	**49	93%
[Vihtavuori N540]*	<<locked>>	96%	34954	89%	**69	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	31821	81%	**80	92%
[Accurate 2015]*	<<locked>>	81%	26890	69%	**30	93%
[Accurate 2495]*	<<locked>>	85%	23815	61%	**26	90%
[Alliant AR-Comp]*	<<locked>>	81%	23931	61%	**74	93%
Alliant Reloder-10x	<<locked>>	81%	29834	76%	**31	95%
[Hodgdon H322]*	<<locked>>	83%	29254	75%	**05	90%
[Hodgdon H335]*	<<locked>>	81%	31372	80%	**71	90%
Hodgdon TrailBoss	<<locked>>	81%	23670	60%	**86	100%
[IMR 3031]*	<<locked>>	90%	27586	70%	**08	90%
IMR 4198	<<locked>>	81%	32227	82%	**51	97%
[Norma 202]*	<<locked>>	90%	30951	79%	**67	90%
ReloadSwiss RS 14	<<locked>>	81%	23264	59%	**19	100%
[Rottweil R 901]*	<<locked>>	87%	31357	80%	**41	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	31937	82%	**80	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	30879	79%	**72	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	28877	74%	**23	90%
[Somchem S335]*	<<locked>>	85%	28094	72%	**23	90%
[Vihtavuori N130]*	<<locked>>	81%	28500	73%	**33	94%
[Vihtavuori N133]*	<<locked>>	82%	24598	63%	**11	90%
[Vihtavuori N135]*	<<locked>>	94%	25947	66%	**16	90%
[Vihtavuori N140]*	<<locked>>	92%	30400	78%	**21	90%
[Vihtavuori N540]*	<<locked>>	93%	31734	81%	**80	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.